ADBLUE METERING DEVICE [Unimog] MERCEDES [EUROPA] [ENGINE]OM 906 LA


ADBLUE METERING DEVICE [Unimog] MERCEDES [EUROPA] [ENGINE]OM 906 LA10252015108280100553040356022522135110170696771878992103160130140160106160150120704346467778235585723856

ADBLUE METERING DEVICE [Unimog] MERCEDES [EUROPA] [ENGINE]OM 906 LA223178193190187181211198196196217175214232226229184220202208200
Item no. Part number Designation/description Quant information
5 A 000 140 02 39  METERING DEVICE
WITHOUT DIFFUSOR HEATER

Replaced by: A 000 140 05 39

[009]
NOTE FOLLOWING WIS DOCUMENT
WIS-NET#AR14.40-W-2036C#
[010]
WHEN REMOVING THE NOZZLE OR METERING UNIT, THE PRESS. LINE TOTHE ADBLUE INJECTION NOZZLE MUST BE REPL.
[015]
IF A METERING DEVICE WITH DIFFUSER HEATER IS RETROFITTED IN A VEHICLE, PLEASE ALSO ORDER:
1 X A 001 546 86 41,1 X A 002 997 11 71,1 X A 016 997 49 45, 1 X A 000 995 62 35,1 X A 906 150 75 33
 001
5 A 000 140 05 39  METERING DEVICE
WITH DIFFUSOR HEATER

Replaced by: A 000 140 07 39
• A 003 997 17 71 [1 pcs.]

[009]
NOTE FOLLOWING WIS DOCUMENT
WIS-NET#AR14.40-W-2036C#
[010]
WHEN REMOVING THE NOZZLE OR METERING UNIT, THE PRESS. LINE TOTHE ADBLUE INJECTION NOZZLE MUST BE REPL.
[015]
IF A METERING DEVICE WITH DIFFUSER HEATER IS RETROFITTED IN A VEHICLE, PLEASE ALSO ORDER:
1 X A 001 546 86 41,1 X A 002 997 11 71,1 X A 016 997 49 45, 1 X A 000 995 62 35,1 X A 906 150 75 33
 001
5 A 000 140 07 39  METERING EQUIPMENT
WITH DIFFUSOR HEATER

Replaced by: A 000 140 41 39

[010]
WHEN REMOVING THE NOZZLE OR METERING UNIT, THE PRESS. LINE TOTHE ADBLUE INJECTION NOZZLE MUST BE REPL.
[015]
IF A METERING DEVICE WITH DIFFUSER HEATER IS RETROFITTED IN A VEHICLE, PLEASE ALSO ORDER:
1 X A 001 546 86 41,1 X A 002 997 11 71,1 X A 016 997 49 45, 1 X A 000 995 62 35,1 X A 906 150 75 33
 001
5 A 000 140 41 39  METERING EQUIPMENT
WITH DIFFUSOR HEATER

[010]
WHEN REMOVING THE NOZZLE OR METERING UNIT, THE PRESS. LINE TOTHE ADBLUE INJECTION NOZZLE MUST BE REPL.
[015]
IF A METERING DEVICE WITH DIFFUSER HEATER IS RETROFITTED IN A VEHICLE, PLEASE ALSO ORDER:
1 X A 001 546 86 41,1 X A 002 997 11 71,1 X A 016 997 49 45, 1 X A 000 995 62 35,1 X A 906 150 75 33
[697]
PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
 001
5 A 000 140 05 39  METERING DEVICE
WITH DIFFUSOR HEATER

Replaced by: A 000 140 07 39
• A 003 997 17 71 [1 pcs.]

[010]
WHEN REMOVING THE NOZZLE OR METERING UNIT, THE PRESS. LINE TOTHE ADBLUE INJECTION NOZZLE MUST BE REPL.
 001
5 A 000 140 07 39  METERING EQUIPMENT
WITH DIFFUSOR HEATER

Replaced by: A 000 140 41 39

[010]
WHEN REMOVING THE NOZZLE OR METERING UNIT, THE PRESS. LINE TOTHE ADBLUE INJECTION NOZZLE MUST BE REPL.
 001
5 A 000 140 41 39  METERING EQUIPMENT
WITH DIFFUSOR HEATER

[010]
WHEN REMOVING THE NOZZLE OR METERING UNIT, THE PRESS. LINE TOTHE ADBLUE INJECTION NOZZLE MUST BE REPL.
[697]
PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
 001
5 A 000 140 07 39  METERING EQUIPMENT

Replaced by: A 000 140 41 39

[010]
WHEN REMOVING THE NOZZLE OR METERING UNIT, THE PRESS. LINE TOTHE ADBLUE INJECTION NOZZLE MUST BE REPL.
 001
5 A 000 140 41 39  METERING EQUIPMENT

[010]
WHEN REMOVING THE NOZZLE OR METERING UNIT, THE PRESS. LINE TOTHE ADBLUE INJECTION NOZZLE MUST BE REPL.
[697]
PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
 001
10 A 000 140 05 94  FILTER 002
10 A 000 140 05 94  FILTER 002
15 A 006 153 44 28  SENDER UNIT
ADBLUE PRESSURE SENSOR

Replaced by: A 006 153 75 28 		001
15 A 006 153 44 28  SENDER UNIT
ADBLUE PRESSURE SENSOR

Replaced by: A 006 153 75 28 		001
15 A 006 153 75 28  PRESSURE SENSOR
ADBLUE 		001
15 A 006 153 75 28  PRESSURE SENSOR
ADBLUE 		001
20 A 006 153 45 28  TEMPERATURE SENSOR
ADBLUE TEMPERATURE SENSOR 		001
20 A 006 153 45 28  TEMPERATURE SENSOR
ADBLUE TEMPERATURE SENSOR 		001
22 A 000 142 00 50  BUSHING
METERING DEVICE TO COOLANT CONNECTION 		006
22 A 000 142 00 50  BUSHING
METERING DEVICE TO COOLANT CONNECTION 		006
25 A 005 153 24 28  SENDER UNIT

Replaced by: A 006 153 43 28 		001
25 A 005 153 24 28  SENDER UNIT

Replaced by: A 006 153 43 28 		001
25 A 006 153 43 28  SENDER UNIT

Replaced by: A 006 153 74 28 		001
25 A 006 153 43 28  SENDER UNIT

Replaced by: A 006 153 74 28 		001
25 A 006 153 74 28  PRESSURE SENSOR
COMPRESSED AIR 		001
25 A 006 153 74 28  PRESSURE SENSOR
COMPRESSED AIR 		001
30 A 001 997 97 71  FITTING
TO METERING DEVICE OUTPUT 		001
30 A 002 997 36 71  FITTING
TO METERING DEVICE OUTPUT

Replaced by: A 002 997 78 71 		001
30 A 002 997 78 71  SCREW-IN FITTING
TO METERING DEVICE OUTPUT 		001
30 A 002 997 78 71  SCREW-IN FITTING
TO METERING DEVICE OUTPUT 		001
35 N 000000 001390  SEALING RING
TO METERING DEVICE OUTPUT 		001
35 A 019 997 55 45  SEAL RING
TO METERING DEVICE OUTPUT 		001
40 A 541 992 00 01  BUSHING
TO METERING DEVICE OUTPUT 		001
43 A 000 140 00 30  NOZZLE
ADBLUE DIFFUSOR HEATER 		001
43 A 000 140 00 30  NOZZLE
ADBLUE DIFFUSOR HEATER 		001
46 A 018 997 92 45  SEAL RING
ADBLUE DIFFUSOR HEATER 		002
46 A 018 997 92 45  SEAL RING
ADBLUE DIFFUSOR HEATER 		002
55 A 000 140 03 68  WATER NOZZLE
ADBLUE

[010]
WHEN REMOVING THE NOZZLE OR METERING UNIT, THE PRESS. LINE TOTHE ADBLUE INJECTION NOZZLE MUST BE REPL.
 001
56 A 001 990 40 00  SCREW
INJECTION NOZZLE TO THROTTLE HOUSING M 6X1.0X12 		002
57 A 000 140 05 68  WATER NOZZLE
ADBLUE

Replaced by: A 000 140 29 68 		001
57 A 000 140 29 68  INJECTION NOZZLE ADDITIVE
ADBLUE 		001
58 A 541 142 05 80  GASKET
ADBLUE 		001
60 A 000 140 05 41  IONIC EXCHANGER

[003]
REPLACEMENT PART MAY NO LONGER BE INSTALLED,SEE SERVICE MEASURE
 001
67 A 906 140 06 55  DELIVERY LINE

Replaced by: A 906 140 08 55 		001
67 A 906 140 08 55  DELIVERY LINE

Replaced by: A 906 140 10 55 		001
67 A 906 140 10 55  PRESSURE LINE 001
70 A 906 155 28 27  BRACKET
METERING DEVICE TO BRACKET 		001
71 A 129 990 03 10  SCREW
METERING DEVICE TO BRACKET M 8X65 		003
71 N 910105 008035  SCREW
METERING DEVICE TO BRACKET M8X65 		003
77 A 002 997 12 71  FITTING
TO METERING DEVICE INPUT 		001
78 A 003 997 17 71  SCREW-IN FITTING
TO METERING DEVICE INPUT 		001
78 A 003 997 17 71  SCREW-IN FITTING
TO METERING DEVICE INPUT 		001
80 A 019 997 55 45  SEAL RING
TO METERING DEVICE INPUT 		001
80 A 019 997 55 45  SEAL RING
TO METERING DEVICE INPUT 		001
82 A 016 997 49 45  SEALING RING
TO METERING DEVICE INPUT 		001
87 A 001 431 27 31  TEST CONNECTION

Replaced by: A 001 431 29 31 		001
87 A 001 431 29 31  TEST CONNECTION
WITH SCREW FITTING 		001
89 N 000000 001067  SEALING RING 002
92 A 906 223 01 34  COVERING
METERING DEVICE

Replaced by: A 906 223 02 34

[012]
FIRST EXHAUST STOCK OF OLD PARTS UP TO ENGINE 805056
 001
92 A 906 223 02 34  HEAT SHIELD
METERING DEVICE 		001
100 A 906 223 02 40  BRACKET
METERING DEVICE 		001
120 N 910143 010012  SCREW
BRACKET TO CYLINDER HEAD M 10X30 		002
130 N 000000 000276  SCREW
BRACKET TO CYLINDER HEAD M8X20 		001
175 A 000 140 05 78  PUMP MODULE

Replaced by: A 000 140 25 78 		001
175 A 000 140 25 78  PUMP MODULE

Replaced by: A 000 140 44 78 		001
175 A 000 140 44 78  PUMP MODULE 001
175 A 000 140 44 78  PUMP MODULE 001
178 A 000 142 02 89  FILTER ELEMENT 001
178 A 000 142 02 89  FILTER ELEMENT 001
181 A 002 997 62 71  FITTING 001
181 A 002 997 62 71  FITTING 001
184 A 002 997 63 71  SCREW-IN FITTING 001
187 A 000 998 26 05  GROMMET 001
190 A 002 997 38 71  FITTING 001
190 A 002 997 38 71  FITTING 001
193 A 002 997 39 71  FITTING 001
193 A 002 997 39 71  FITTING 001
196 A 002 997 37 71  FITTING 001
196 A 002 997 37 71  FITTING 001
198 A 000 142 01 06  ACCUM. BAG 001
198 A 000 142 02 06  ACCUM. BAG 001
200 A 000 997 05 23  VALVE INSERT
WITH PROTECTIVE CAP 		001
202 A 000 142 03 55  DUST PROTECTION CAP
WITH GASKET 		001
202 A 000 142 03 55  DUST PROTECTION CAP
WITH GASKET 		001
208 N 000000 007087  HEXALOBULAR BOLT
RESERVOIR BLADDER AT PUMP MODULE 		003
211 A 000 997 49 34  UNION SCREW 001
214 A 000 140 06 94  STRAINER 001
214 A 000 140 06 94  STRAINER 001
217 A 000 140 05 94  FILTER 001
217 A 000 140 05 94  FILTER 001
220 A 000 142 06 80  GASKET 001
223 A 002 997 64 71  SCREW-IN FITTING 001
223 A 002 997 64 71  SCREW-IN FITTING 001
226 A 000 142 02 19  VALVE
CRANKCASE BREATHER 		001
229 A 000 142 00 19  VALVE 001
229 A 000 142 00 19  VALVE 001
232 A 014 997 36 45  REPAIR KIT O-RING 001
235 A 002 990 36 54  NUT W FLANGE, BINDING M6 001
238 A 000 490 05 10  EXHAUST PIPE 001