REAR AXLE HOUSING WITH DIFFERENTIAL [Car] MERCEDES [EUROPA] [CHASSIS]E-KLASSE


REAR AXLE HOUSING WITH DIFFERENTIAL [Car] MERCEDES [EUROPA] [CHASSIS]E-KLASSE20304050601070110120410908085130450400460440430390

REAR AXLE HOUSING WITH DIFFERENTIAL [Car] MERCEDES [EUROPA] [CHASSIS]E-KLASSE300310320330340350340360200210295230290290230240250240250270280
Item no. Part number Designation/description Quant information
10 A 230 350 24 14  HOUSING
REAR AXLE CENTER ASSEMBLY W/O FLANGE 1:3.27

[697]
PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
 001
20 A 230 351 00 05  HOUSING
REAR AXLE HOUSING WITH DIFFERENTIAL 		001
30 A 000 997 62 32  SCREW PLUG
REAR AXLE HOUSING M 24X1.5 		002
40 A 210 980 00 02  TAPERED ROLLER BEARING
RING GEAR BEARING 		002
50 A 210 994 01 41  FUSE
AS REQUIRED 3.60 MM 		002
50 A 210 994 02 41  FUSE
AS REQUIRED 3.70 MM

[402]
NO LONGER AVAILABLE
 002
50 A 210 994 03 41  FUSE
AS REQUIRED 3.80 MM

[402]
NO LONGER AVAILABLE
 002
50 A 210 994 04 41  FUSE
AS REQUIRED 3.85 MM 		002
50 A 210 994 05 41  FUSE
AS REQUIRED 3.90 MM 		002
50 A 210 994 06 41  FUSE
AS REQUIRED 3.95 MM

[402]
NO LONGER AVAILABLE
 002
50 A 210 994 07 41  FUSE
AS REQUIRED 4.00 MM 		002
50 A 210 994 08 41  FUSE
AS REQUIRED 4.05 MM

[402]
NO LONGER AVAILABLE
 002
50 A 210 994 09 41  FUSE
AS REQUIRED 4.10 MM 		002
50 A 210 994 10 41  FUSE
AS REQUIRED 4.15 MM 		002
50 A 210 994 11 41  FUSE
AS REQUIRED 4.20 MM 		002
50 A 210 994 12 41  FUSE
AS REQUIRED 4.30 MM

[402]
NO LONGER AVAILABLE
 002
50 A 210 994 13 41  FUSE
AS REQUIRED 4.40 MM

[402]
NO LONGER AVAILABLE
 002
50 A 210 994 14 41  FUSE
AS REQUIRED 4.45 MM

[402]
NO LONGER AVAILABLE
 002
50 A 210 994 15 41  FUSE
AS REQUIRED 4.50 MM

[402]
NO LONGER AVAILABLE
 002
60 A 025 997 26 47  SEAL RING
INTERIOR FLANGE

[012]
IMPORTANT: SEALING RING AND PROTECTIVE RING MUST ALWAYS BE EXCHANGED TOGETHER!
 002
85 A 230 350 04 90  BREATHER 001
90 A 230 350 06 36  END COVER 001
120 N 910105 010009  HEXAGON HEAD BOLT
END COVER TO HOUSING M10X25 		010
200 A 210 350 44 39  GEAR SET 1:3.27

Replaced by: A 210 350 56 39

[014]
FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.

Ident. end no.
[015]To Chassis: A 876335 => To Date: 22/08/2005
 001
200 A 210 350 56 39  GEAR SET 1:3.27 001
210 A 129 350 20 23  DIFFERENTIAL GEAR
LESS RING GEAR AND PINION

[402]
NO LONGER AVAILABLE
 001
230 A 210 353 05 15  SIDE GEAR 004
240 A 210 353 01 14  DIFFERENTIAL PINION 004
250 A 210 353 02 24  SPHERICAL WASHER 004
270 A 210 353 02 21  PIN 002
280 N 001481 006017  ROLL PIN 001
290 A 115 353 15 62  PRESSURE PLATE
AS REQUIRED 1.00 MM 		002
290 A 115 353 14 62  PRESSURE PLATE
AS REQUIRED 1.10 MM 		002
290 A 115 353 13 62  PRESSURE PLATE
AS REQUIRED 1.20 MM 		002
290 A 115 353 12 62  PRESSURE PLATE
AS REQUIRED 1.25 MM 		002
290 A 115 353 11 62  PRESSURE PLATE
AS REQUIRED 1.30 MM 		002
290 A 115 353 16 62  PRESSURE PLATE
AS REQUIRED 1.35 MM 		002
290 A 115 353 10 62  PRESSURE PLATE
AS REQUIRED 1.40 MM 		002
290 A 115 353 17 62  PRESSURE PLATE
AS REQUIRED 1.45 MM 		002
290 A 115 353 09 62  PRESSURE PLATE
AS REQUIRED 1.50 MM 		002
290 A 115 353 18 62  PRESSURE PLATE
AS REQUIRED 1.55 MM 		002
290 A 115 353 08 62  PRESSURE PLATE
AS REQUIRED 1.60 MM 		002
290 A 115 353 19 62  PRESSURE PLATE
AS REQUIRED 1.65 MM 		002
290 A 115 353 07 62  PRESSURE PLATE
AS REQUIRED 1.70 MM 		002
295 A 003 990 54 12  BOLT
RING GEAR TO DIFFERENTIAL CASE M10X1 		010
300 A 210 353 05 72  NUT
SCREW FITTING JOINT FLANGE M29X1.5 		001
310 A 220 350 23 45  JOINT FLANGE
PROPELLER SHAFT 110 MM 		001
320 A 024 997 99 47  SEAL RING
DRIVE PINION 		001
330 A 002 980 18 02  TAPERED ROLLER BEARING
DRIVE PINION 		001
340 A 126 353 00 62  PRESSURE PLATE
DRIVE PINION 		002
350 A 126 353 00 42  SPACER BUSHING 001
360 A 000 980 09 02  TAPERED ROLLER BEARING
DRIVE PINION 		001