AXLE SHAFT [Car] MERCEDES [EUROPA] [CHASSIS]400


AXLE SHAFT [Car] MERCEDES [EUROPA] [CHASSIS]40023201714811520293211352935322614
Item no. Part number Designation/description Quant information
5 A 129 350 27 10  AXLE SHAFT
USED WITHOUT W/ACCELERATION SKID CONTROL (ASR) 		002
5 A 124 350 87 10  AXLE SHAFT
ONLY USED W/ACCELERATION SKID CONTROL (ASR) 		002
8 A 124 357 01 91  BOOT
AXLE SHAFT,OUTSIDE BOOT

[005]
FOR USE WITHOUT ACCELERATION SKID CONTROL (A S R)
[019]
Up to ident. no.:C 241286
[021]
FROM IDENT. NO. C 241286 TO C 258983 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO C 241286
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. C 241287
 002
8 A 124 357 02 91  BOOT

Replaced by: A 124 357 01 91 		-
8 A 124 357 01 91  BOOT
AXLE SHAFT,OUTSIDE BOOT

[005]
FOR USE WITHOUT ACCELERATION SKID CONTROL (A S R)
[019]
Up to ident. no.:C 241286
[021]
FROM IDENT. NO. C 241286 TO C 258983 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO C 241286
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. C 241287
 002
8 A 202 357 00 91  BOOT

Replaced by: A 202 357 01 91 		-
8 A 202 357 01 91  BOOT
AXLE SHAFT,OUTSIDE BOOT

[005]
FOR USE WITHOUT ACCELERATION SKID CONTROL (A S R)
[020]
As of ident. no.C 241287
[021]
FROM IDENT. NO. C 241286 TO C 258983 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO C 241286
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. C 241287
 002
8 A 129 357 01 91  BOOT
AXLE SHAFT,OUTSIDE BOOT

[006]
ONLY USED W/ACCELERATION SKID CONTROL (A S R)
[019]
Up to ident. no.:C 241286
[021]
FROM IDENT. NO. C 241286 TO C 258983 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO C 241286
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. C 241287
 002
8 A 210 357 00 91  BOOT

Replaced by: A 210 357 01 91 		-
8 A 210 357 01 91  BOOT
AXLE SHAFT,OUTSIDE BOOT

[006]
ONLY USED W/ACCELERATION SKID CONTROL (A S R)
[020]
As of ident. no.C 241287
[021]
FROM IDENT. NO. C 241286 TO C 258983 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO C 241286
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. C 241287
 002
11 A 124 997 30 90  LOOM TIE
MAJOR

[019]
Up to ident. no.:C 241286
[021]
FROM IDENT. NO. C 241286 TO C 258983 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO C 241286
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. C 241287
 004
11 A 210 997 06 90  LOOM TIE
MAJOR

[020]
As of ident. no.C 241287
[021]
FROM IDENT. NO. C 241286 TO C 258983 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO C 241286
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. C 241287
 004
14 A 124 997 34 90  LOOM TIE
MINOR

[005]
FOR USE WITHOUT ACCELERATION SKID CONTROL (A S R)
[019]
Up to ident. no.:C 241286
[021]
FROM IDENT. NO. C 241286 TO C 258983 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO C 241286
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. C 241287
 004
14 A 202 997 03 90  LOOM TIE
MINOR

[005]
FOR USE WITHOUT ACCELERATION SKID CONTROL (A S R)
[020]
As of ident. no.C 241287
[021]
FROM IDENT. NO. C 241286 TO C 258983 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO C 241286
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. C 241287
 004
14 A 129 997 36 90  LOOM TIE
MINOR

[006]
ONLY USED W/ACCELERATION SKID CONTROL (A S R)
[019]
Up to ident. no.:C 241286
[021]
FROM IDENT. NO. C 241286 TO C 258983 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO C 241286
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. C 241287
 004
14 A 202 997 04 90  LOOM TIE
MINOR

[006]
ONLY USED W/ACCELERATION SKID CONTROL (A S R)
[020]
As of ident. no.C 241287
[021]
FROM IDENT. NO. C 241286 TO C 258983 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO C 241286
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. C 241287
 004
17 A 126 350 01 13  JOINT
ANNULAR JOINT,INSIDE

[019]
Up to ident. no.:C 241286
[021]
FROM IDENT. NO. C 241286 TO C 258983 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO C 241286
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. C 241287
 002
17 A 140 350 23 13  JOINT
ANNULAR JOINT,INSIDE

[020]
As of ident. no.C 241287
[021]
FROM IDENT. NO. C 241286 TO C 258983 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO C 241286
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. C 241287
 002
20 N 000983 026000  LOCK RING
ANNULAR JOINT ON AXLE SHAFT 		002
23 A 140 357 00 89  LOCKING CAP 002
26 A 124 350 08 37  REPAIR KIT
AXLE SHAFT,INSIDE BOOT

[005]
FOR USE WITHOUT ACCELERATION SKID CONTROL (A S R)
[019]
Up to ident. no.:C 241286
[021]
FROM IDENT. NO. C 241286 TO C 258983 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO C 241286
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. C 241287
 002
26 A 124 350 09 37  REPAIR KIT
AXLE SHAFT,INSIDE BOOT

[005]
FOR USE WITHOUT ACCELERATION SKID CONTROL (A S R)
[020]
As of ident. no.C 241287
[021]
FROM IDENT. NO. C 241286 TO C 258983 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO C 241286
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. C 241287
 002
26 A 124 350 07 37  REPAIR KIT
AXLE SHAFT,INSIDE BOOT

[006]
ONLY USED W/ACCELERATION SKID CONTROL (A S R)
[019]
Up to ident. no.:C 241286
[021]
FROM IDENT. NO. C 241286 TO C 258983 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO C 241286
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. C 241287
 002
26 A 124 350 08 37  REPAIR KIT
AXLE SHAFT,INSIDE BOOT

[006]
ONLY USED W/ACCELERATION SKID CONTROL (A S R)
[020]
As of ident. no.C 241287
[021]
FROM IDENT. NO. C 241286 TO C 258983 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO C 241286
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. C 241287
 002
29 A 126 357 09 75  WASHER
AXLE SHAFT TO INTERIOR FLANGE 		004
32 A 001 990 69 12  SCREW
AXLE SHAFT TO INTERIOR FLANGE 		012
35 A 210 357 01 72  NUT

Replaced by: A 001 990 38 50 		-
35 A 001 990 38 50  COLLAR NUT F SHAFT
AXLE SHAFT TO REAR AXLE SHAFT FLANGE 		002