REAR AXLE, TUBES [Car] MERCEDES [EUROPA] [CHASSIS]TYP 300


REAR AXLE, TUBES [Car] MERCEDES [EUROPA] [CHASSIS]TYP 30054555337383352323442414030513536959697929194441211931031525091585756579818288345432662272824252342215201617293636964666518192173777766067687071727374908978798085848687102101981009921a
Item no. Part number Designation/description Quant information
REAR AXLE TUBES
----- A 198 350 09 19  REAR AXLE TUBE, LEFT
WITH PIVOT PINS

[031]
UP TO REAR AXLE 002944 UP TO CHASSIS 002779 WITH THE EXCEPTION OF 002754
 001
1 A 198 350 16 19  REAR AXLE TUBE, LEFT
WITH PIVOT PINS

[032]
FROM REAR AXLE 002945 FROM CHASSIS 002780 IN ADDITION FITTED ON 002754
 001
----- A 198 350 10 19  REAR AXLE TUBE, RIGHT
WITH PIVOT PINS

[031]
UP TO REAR AXLE 002944 UP TO CHASSIS 002779 WITH THE EXCEPTION OF 002754
 001
2 A 198 350 17 19  REAR AXLE TUBE, RIGHT
WITH PIVOT PINS

[032]
FROM REAR AXLE 002945 FROM CHASSIS 002780 IN ADDITION FITTED ON 002754
 001
3 A 188 357 00 50  BUSHING
FORK TO RIGHT REAR AXLE TUBE 		002
4 CONICAL PLUG
ASM 10X1 N 87 FOR RIGHT REAR AXLE TUBE 		001
5 A 188 350 00 55  PIVOT PIN
FOR THRUST ARMS 		002
6 A 188 357 00 53  SLEEVE
FO BOOT FOR RIGHT REAR AXLE TUBE 		001
7 GREASE NIPPLE
A 6 DIN 71 412 		002
----- A 198 326 11 74  BOLT
SHOCK ABSORBERS TO REAR AXLE TUBES

[031]
UP TO REAR AXLE 002944 UP TO CHASSIS 002779 WITH THE EXCEPTION OF 002754
 002
----- A 198 320 00 41  BOLT
SHOCK ABSORBERS TO REAR AXLE TUBES

Replaced by: A 198 320 01 41
8 A 198 320 01 41  BOLT
SHOCK ABSORBERS TO REAR AXLE TUBES

[032]
FROM REAR AXLE 002945 FROM CHASSIS 002780 IN ADDITION FITTED ON 002754
 002
9 A 198 990 03 05  STUD
AT REAR AXLE TUBES, FOR REAR SPRINGS, BOTTOM 		002
10 DOWEL PIN, NOTCHED
8X50 DIN 1472 SPRING CLIPS TO REAR AXLE TUBES 		002
11 A 186 997 00 32  SCREW PLUG,
24X1.5-MM THREAD FOR OIL FILLING AND OIL DRAIN 		002
----- A 180 350 02 90  BREATHER
FOR LEFT REAR AXLE TUBE

Replaced by: A 180 350 04 90
12 A 180 350 04 90  BREATHER
FOR LEFT REAR AXLE TUBE 		001
SLIP UNIVERSAL JOINT
15 A 198 350 00 13  SLIP UNIVERSAL JOINT 001
16 A 180 357 01 52  WASHER
IN UNIVERSAL JOINT YOKE 		001
----- LOCK RING
48X1,75 DIN 472 IN UNIVERSAL JOINT YOKE

[033]
UP TO REAR AXLE 8500300
 001
17 A 000 994 29 41  LOCK RING
IN UNIVERSAL JOINT YOKE

[034]
FROM REAR AXLE 8500301
 001
18 A 198 350 01 13  SLIDING SLEEVE
IN UNIVERSAL JOINT YOKE 		001
19 A 188 994 00 41  LOCK RING
IN UNIVERSAL JOINT YOKE 		002
20 A 180 981 00 86  CYLINDRICAL ROLLER
IN UNIVERSAL JOINT YOKE 		108
21 A 188 357 00 52  WASHER
IN UNIVERSAL JOINT YOKE 		001
21a LOCK RING
48X1,75 DIN 472 IN UNIVERSAL JOINT YOKE 		001
22 A 188 357 00 13  UNIVERSAL CROSS 001
23 A 186 357 00 14  NEEDLE BEARING BUSHING 004
----- REPLACED BY
2,5X13,8 II DIN 5402 2,5X13,8 DIN 617
24 NEEDLE
2,5X13,8 II DIN 5402 		112
25 A 186 994 12 35  SNAP RING, 2.15 MM THICK
OPTIONAL 		004
----- A 186 994 04 35  SNAP RING, 2.25 MM THICK
OPTIONAL 		004
----- A 186 994 15 35  SNAP RING, 2.35 MM THICK
OPTIONAL 		004
----- A 186 994 17 35  SNAP RING, 2.45 MM THICK
OPTIONAL 		004
----- A 186 994 19 35  SNAP RING, 2.55 MM THICK
OPTIONAL 		004
26 A 188 357 00 91  RUBBER BOOT 001
27 HEX. SOCKET SCREW
M 10X85 DIN 912-8 G UNIVERSAL JOINT YOKE TO REAR AXLE SIDE GEAR 		001
28 LOCK WASHER
B 10 DIN 127 UNIVERSAL JOINT YOKE TO REAR AXLE SIDE GEAR 		001
29 A 188 353 01 52  SPACER WASHER,
1.6-MM THICK OPTIONAL; FOR UNIVERSAL JOINT YOKE, INSIDE 		001
----- A 188 353 03 52  SPACER WASHER,
1.7-MM THICK OPTIONAL; FOR UNIVERSAL JOINT YOKE, INSIDE 		001
----- A 188 353 05 52  SPACER WASHER,
1.8-MM THICK OPTIONAL; FOR UNIVERSAL JOINT YOKE, INSIDE 		001
----- A 188 353 07 52  SPACER WASHER,
1.9-MM THICK OPTIONAL; FOR UNIVERSAL JOINT YOKE, INSIDE 		001
----- A 188 353 09 52  SPACER WASHER,
2.0-MM THICK OPTIONAL; FOR UNIVERSAL JOINT YOKE, INSIDE 		001
----- A 188 353 11 52  SPACER WASHER,
2.1-MM THICK OPTIONAL; FOR UNIVERSAL JOINT YOKE, INSIDE 		001
----- A 188 353 13 52  SPACER WASHER,
2.2-MM THICK OPTIONAL; FOR UNIVERSAL JOINT YOKE, INSIDE 		001
----- A 188 353 15 52  SPACER WASHER,
2.3-MM THICK OPTIONAL; FOR UNIVERSAL JOINT YOKE, INSIDE 		001
----- A 188 353 17 52  SPACER WASHER,
2.4-MM THICK OPTIONAL; FOR UNIVERSAL JOINT YOKE, INSIDE 		001
----- A 188 353 19 52  SPACER WASHER,
2.5-MM THICK OPTIONAL; FOR UNIVERSAL JOINT YOKE, INSIDE 		001
REAR AXLE SHAFTS
----- A 198 350 04 10  REAR AXLE SHAFT, LEFT

[031]
UP TO REAR AXLE 002944 UP TO CHASSIS 002779 WITH THE EXCEPTION OF 002754
 001
30 A 198 350 19 10  REAR AXLE SHAFT, LEFT

[032]
FROM REAR AXLE 002945 FROM CHASSIS 002780 IN ADDITION FITTED ON 002754
 001
----- A 183 401 01 71  WHEEL MOUNTING BOLT

[031]
UP TO REAR AXLE 002944 UP TO CHASSIS 002779 WITH THE EXCEPTION OF 002754
 005
31 A 198 402 00 71  WHEEL MOUNTING BOLT

[032]
FROM REAR AXLE 002945 FROM CHASSIS 002780 IN ADDITION FITTED ON 002754
 005
----- A 198 350 14 10  REAR AXLE SHAFT, RIGHT

[031]
UP TO REAR AXLE 002944 UP TO CHASSIS 002779 WITH THE EXCEPTION OF 002754
 001
32 A 198 350 21 10  REAR AXLE SHAFT, RIGHT

[032]
FROM REAR AXLE 002945 FROM CHASSIS 002780 IN ADDITION FITTED ON 002754
 001
----- A 183 401 01 71  WHEEL MOUNTING BOLT

[031]
UP TO REAR AXLE 002944 UP TO CHASSIS 002779 WITH THE EXCEPTION OF 002754
 005
33 A 198 402 00 71  WHEEL MOUNTING BOLT

[032]
FROM REAR AXLE 002945 FROM CHASSIS 002780 IN ADDITION FITTED ON 002754
 005
34 A 180 357 00 74  LOCK PIN 001
35 A 180 993 31 01  PRESSURE SPRING 001
36 LOCK PLATE
3,2 DIN 6799 		001
37 A 198 350 08 10  REAR AXLE
SHAFT, LEFT, WITH SEAL RACE AND RIGHT-HAND THREAD SPECIAL REQUEST FOR DRUM BRAKES WITH RUDGE HUBS 		001
38 A 198 350 18 10  REAR AXLE
SHAFT, RIGHT, WITH SEAL RACE, LOCK AND LEFT-HAND THREAD SPECIAL REQUEST FOR DRUM BRAKES WITH RUDGE HUBS 		001
----- A 180 357 00 74  LOCK PIN
SPECIAL REQUEST FOR DRUM BRAKES WITH RUDGE HUBS 		001
----- A 180 993 31 01  PRESSURE SPRING
SPECIAL REQUEST FOR DRUM BRAKES WITH RUDGE HUBS 		001
----- LOCK PLATE
3,2 DIN 6799 SPECIAL REQUEST FOR DRUM BRAKES WITH RUDGE HUBS 		001
40 GROOVED BALL BEARING
6308 C 4 DIN 625 FOR REAR AXLE SHAFTS 		002
41 A 183 353 03 73  LOCK PLATE
FOR REAR AXLE SHAFTS 		002
42 A 153 357 00 26  GROOVED NUT
FOR REAR AXLE SHAFTS 		002
43 HEX. NUT
M 12X1,5 DIN 934-5 S LEFT REAR AXLE TUBE TO REAR AXLE HOUSING 		002
44 HEX. NUT
M 12X1,5 DIN 936-5 S LEFT REAR AXLE TUBE TO REAR AXLE HOUSING 		002
45 HEX. NUT
M 8 DIN 934-5 S LEFT REAR AXLE TUBE TO REAR AXLE HOUSING 		007
----- HOSE CLAMP
S 9 N 262 RUBBER BOOTS TO REAR AXLE TUBE AND REAR AXLE HOUSING 		002
----- HOSE STRAP
9X0,4X560 N 263 RUBBER BOOTS TO REAR AXLE TUBE AND REAR AXLE HOUSING ORDER BY THE METER 		001
----- HOSE STRAP
9X0,4X900 N 263 RUBBER BOOTS TO REAR AXLE TUBE AND REAR AXLE HOUSING ORDER BY THE METER 		001
50 A 189 420 00 05  AL-FIN BRAKE
DRUM WITHOUT AIR SCOOPS FOR DRUM BRAKES

[031]
UP TO REAR AXLE 002944 UP TO CHASSIS 002779 WITH THE EXCEPTION OF 002754
 002
----- A 198 420 06 05  AL-FIN BRAKE
DRUM WITH 5 AIR SCOOPS FOR DRUM BRAKES SPECIAL REQUEST FOR SPORTY DRIVING 		002
51 A 198 420 07 05  AL-FIN BRAKE
DRUM WITH 6 AIR SCOOPS FOR DRUM BRAKES WITH RUDGE HUBS SPECIAL REQUEST FOR SPORTY DRIVING 		002
52 A 136 990 00 59  SPHERICAL COLLAR
NUT, 14X1,5-MM THREAD FOR BRAKE DRUMS SEE ALSO GROUPS 33 AND 40 		004
53 A 198 421 00 60  BASE PLATE
BRAKE DRUMS TO WHEEL HUBS SPECIAL REQUEST FOR BRAKE DRUMS WITH RUDGE HUBS 		012
54 A 194 994 02 30  LOCK PLATE
BRAKE DRUMS TO WHEEL HUBS SPECIAL REQUEST FOR BRAKE DRUMS WITH RUDGE HUBS 		006
55 HEX. HEAD SCREW
M 10X20 K DIN 933-8 G BRAKE DRUMS TO WHEEL HUBS SPECIAL REQUEST FOR BRAKE DRUMS WITH RUDGE HUBS 		012
56 A 198 421 00 12  BRAKE DISC

[032]
FROM REAR AXLE 002945 FROM CHASSIS 002780 IN ADDITION FITTED ON 002754
 002
57 A 198 423 00 16  CENTERING PLATE
FOR BRAKE DISCS TO REAR AXLE SHAFTS

[032]
FROM REAR AXLE 002945 FROM CHASSIS 002780 IN ADDITION FITTED ON 002754
 002
58 A 198 423 00 56  INTERMEDIATE PLATE

[032]
FROM REAR AXLE 002945 FROM CHASSIS 002780 IN ADDITION FITTED ON 002754
 002
----- LOCK WASHER
B 14 DIN 127 BRAKE DISCS WITH CENTERING PLATES TO REAR AXLE SHAFTS

[032]
FROM REAR AXLE 002945 FROM CHASSIS 002780 IN ADDITION FITTED ON 002754
 010
----- HEX. NUT
M 14X1,5 DIN 936-5 S BRAKE DISCS WITH CENTERING PLATES TO REAR AXLE SHAFTS

[032]
FROM REAR AXLE 002945 FROM CHASSIS 002780 IN ADDITION FITTED ON 002754
 010
REAR AXLE SUSPENSION
60 A 198 350 00 55  CONNECTING BOLT
FOR RIGHT REAR AXLE TUBE TO REAR AXLE HOUSING 		001
63 A 188 351 08 52  SPACER WASHER,
1.9-MM THICK OPTIONAL; BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE 		002
----- A 188 351 09 52  SPACER WASHER,
2.0-MM THICK OPTIONAL; BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE 		002
----- A 188 351 10 52  SPACER WASHER,
2.1-MM THICK OPTIONAL; BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE 		002
----- A 188 351 11 52  SPACER WASHER,
2.2-MM THICK OPTIONAL; BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE 		002
----- A 188 351 12 52  SPACER WASHER,
2.3-MM THICK OPTIONAL; BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE FOR REPAIRS 		002
----- A 188 351 13 52  SPACER WASHER,
2.4-MM THICK OPTIONAL; BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE FOR REPAIRS 		002
----- A 188 351 14 52  SPACER WASHER,
2.5-MM THICK OPTIONAL; BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE FOR REPAIRS 		002
----- A 188 351 15 52  SPACER WASHER,
3.0-MM THICK OPTIONAL; BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE FOR REPAIRS 		002
64 A 188 351 10 52  SPACER WASHER,
2.1-MM THICK FOR REAR AXLE TUBE, OUTSIDE 		002
65 A 188 351 00 86  RUBBER RING
OVER SPACER WASHERS 		004
66 A 188 351 00 51  SHIM
ON CONNECTION BOLT, AT REAR AXLE TUBE MOUNTING, OUTSIDE 		002
67 A 188 351 03 53  BEARING SLEEVE
RUBBER MOUNTING TO PIVOT PIN. FRONT 		001
68 A 188 351 01 51  RING HALF
RUBBER MOUNTING TO PIVOT PIN. FRONT 		002
69 A 188 351 00 53  SLEEVE
IN REAR AXLE TUBES 		002
70 A 188 990 00 35  SPLINED BOLT
FOR CONNECTION BOLT 		001
71 LOCK WASHER
B 8 DIN 127 FOR CONNECTION BOLT 		001
72 HEX. NUT
M 8 DIN 934-5 S FOR CONNECTION BOLT 		001
73 A 198 351 01 48  RUBBER MOUNTING
FOR REAR AXLE HOUSING 		002
74 A 198 351 03 16  DIFFERENTIAL CARRIER 001
76 A 188 351 00 73  LOCK PLATE
RUBBER MOUNTING TO PIVOT PIN, REAR 		001
77 GROOVED NUT
M 35X1,5 DIN 70 852 RUBBER MOUNTING TO PIVOT PIN, REAR 		001
----- A 198 350 09 29  THRUST ARM

Replaced by: A 198 350 15 29
78 A 198 350 15 29  THRUST ARM 002
79 A 188 352 00 65  RUBBER MOUNTING
THRUST ARMS TO REAR AXLE TUBE PIVOT PINS 		004
80 A 188 352 00 76  TIGHTENING WASHER
THRUST ARMS TO REAR AXLE TUBE PIVOT PINS 		002
81 A 188 352 01 76  TIGHTENING WASHER
THRUST ARMS TO REAR AXLE TUBE PIVOT PINS 		002
82 A 188 994 00 12  LOCK PLATE
THRUST ARMS TO REAR AXLE TUBE PIVOT PINS 		002
83 A 188 352 00 71  HEX. HEAD SCREW
THRUST ARMS TO REAR AXLE TUBE PIVOT PINS 		002
84 A 000 352 01 65  RUBBER MOUNTING
FOR THRUST ARMS. FRONT 		002
85 A 198 352 03 74  PIVOT PIN
THRUST ARMS TO FRAME 		002
86 WASHER
19 DIN 433 THRUST ARMS TO FRAME 		NB
87 CASTLE NUT
M 18X1,5 DIN 937-5 S THRUST ARMS TO FRAME 		002
----- COTTER PIN
4X35 DIN 94 THRUST ARMS TO FRAME 		002
89 HEX. HEAD SCREW
M 12X80 DIN 931-8 G FOR REAR AXLE SUSPENSION, DIFFERENTIAL CARRIER TO FRAME 		002
90 LOCK WASHER
B 12 DIN 127 FOR REAR AXLE SUSPENSION, DIFFERENTIAL CARRIER TO FRAME 		002
91 A 198 428 08 40  BRACKET
FOR REAR BRAKE LINE 		001
92 HEX. HEAD SCREW
M 6X25 DIN 931-8 G BRAKE LINE TO REAR AXLE HOUSING 		001
93 LOCK WASHER
B 6 DIN 127 BRAKE LINE TO REAR AXLE HOUSING 		001
94 HEX. NUT
M 6 DIN 934-5 S BRAKE LINE TO REAR AXLE HOUSING 		001
95 A 198 428 16 40  BRACKET, RIGHT, REAR
BRAKE LINE TO RIGHT REAR AXLE TUBE 		001
96 HEX. HEAD SCREW
M 8X15 DIN 933-8 G BRAKE LINE TO RIGHT REAR AXLE TUBE 		001
97 LOCK WASHER
B 8 DIN 127 BRAKE LINE TO RIGHT REAR AXLE TUBE 		001
98 A 198 350 13 29  STRUT
FOR REAR AXLE SUSPENSION 		001
99 HEX. HEAD SCREW
M 8X32 DIN 70 613-8 G STRUT TO FRAME 		004
100 LOCK WASHER
B 8 DIN 127 STRUT TO FRAME 		004
101 A 198 990 08 01  HEX. HEAD SCREW
STRUT TO DIFFERENTIAL CARRIER. REAR 		001
102 LOCK WASHER
B 12 DIN 127 STRUT TO DIFFERENTIAL CARRIER. REAR 		001