ELECTRICAL EQUIPMENT AND INSTRUMENTS [Car] MERCEDES [EUROPA] [CHASSIS]TYP 220

Item no.	Part number	Designation/description	Quant	information
BATTERY AND STARTER CABLE
1	A 000 541 58 01	BATTERY 12 V 60 AH	001
-----	A 000 541 72 01	BATTERY 12 V 56 AH WITH MIPOR SEPARATOR EXPORT, SPECIAL REQUEST TROPICAL DESIGN	001
-----	A 121 540 01 23	FIXING FRAME Replaced by: A 111 540 00 23
2	A 111 540 00 23	FIXING FRAME	001
3	A 120 541 01 24	TIGHTENING SCREW FOR BATTERY FIXING	002
-----		LOCK WASHER B 6 DIN 127 FOR BATTERY FIXING	002
-----		HEX. NUT M 6 DIN 934-5 S FOR BATTERY FIXING	002
-----	A 000 987 05 32	RUBBER HOSE, 20 MM LONG OVER ANGLE OF SUPPORTING RAIL, BATTERY ORDER BY THE METER	002
6	A 128 540 00 30	STARTER CABLE, 660-MM LONG FROM POS. POLE TO STARTER MOTOR	001
-----	A 180 540 01 30	STARTER CABLE, 1,280-MM LONG FROM POS. POLE TO STARTER MOTOR	001
-----	A 136 546 00 35	RUBBER PROTECTIVE CAP FOR STARTER CABLE Replaced by: A 111 546 00 35
7	A 111 546 00 35	RUBBER PROTECTIVE CAP FOR STARTER CABLE	001
8	A 180 540 00 31	GROUND CABLE FROM NEG. POLE OF BATTERY TO ENGINE	001
-----	A 180 540 04 31	GROUND CABLE FROM NEG. POLE OF BATTERY TO ENGINE	001
9	A 000 997 34 81	GROMMET FOR STARTER CABLE THROUGH BRACKET TO FRONT WALL	001
10	A 186 997 07 81	GROMMET FOR STARTER CABLE THROUGH PARTITION WALL	001
11	A 187 995 00 37	FIXING CLAMP FOR STARTER CABLE TO BODY FRONT END	001
-----		LENS-HD. SHEET METAL SCREW BZ 4,8X9,5 DIN 7981 FOR STARTER CABLE TO BODY FRONT END	001
CABLES
-----	A 128 540 00 05	MAIN CABLE HARNESS	001
-----	A 128 540 01 05	MAIN CABLE HARNESS	001
16	A 000 545 06 28	HOUSING, LOWER PART, WITH SOCKET	001
17	A 000 545 00 80	GASKET	001
-----	A 000 988 34 78	FIXING CLIP FOR HOUSING, UPPER PART WITH LOWER PART, TO GLOVE COMPARTMENT	002
18	A 121 540 19 09	CABLE HARNESS IN JACKET TUBE FROM CHASSIS 002430	001
-----	A 121 540 21 09	CABLE HARNESS IN JACKET TUBE FROM CHASSIS 002430 [004] OMISSION OF LIGHT SIGNAL FOR THE U.S.A.	001
-----	A 121 540 20 09	CABLE HARNESS IN JACKET TUBE FROM CHASSIS 002430	001
-----	A 180 540 07 09	ADDITIONAL CABLE HARNESS UP TO CHASSIS 9501239	001
-----	A 180 540 09 09	ADDITIONAL CABLE HARNESS UP TO CHASSIS 9501239	001
-----	A 128 540 00 09	ADDITIONAL CABLE HARNESS FOR HIGHER NUMBER OF REVOLUTIONS AND SECONDARY BRAKE FROM CHASSIS 9501240	001
-----	A 128 540 01 09	ADDITIONAL CABLE HARNESS FOR HIGHER NUMBER OF REVOLUTIONS AND SECONDARY BRAKE FROM CHASSIS 9501240	001
-----	A 180 540 08 09	ADDITIONAL CABLE HARNESS FROM SWITCH, REAR AXLE TO GROUND AND SWITCH, SERVO AGGREGATE	001
-----	A 128 540 00 07	Replaced by: A 128 540 01 07
-----	A 128 540 02 07	Replaced by: A 128 540 01 07
19	A 128 540 01 07		001
-----	A 128 540 03 07	Replaced by: A 128 540 04 07
-----	A 128 540 05 07	Replaced by: A 128 540 04 07
-----	A 180 540 29 38	GROUND CABLE FROM CONTACTOR TERMINAL 30/51 TO GROUND UP TO CHASSIS 9501239	001
-----	A 180 997 15 82	Replaced by: A 000 997 47 82
-----	A 120 997 08 82	RUBBER HOSE, 20 MM LONG FOR CABLE FROM CABLE CONNECTOR TO BACK-UP LIGHT SWITCH OR STARTER SIDE TO MAIN CABLE HARNESS RESP. Replaced by: A 000 997 47 82
-----	A 000 997 47 82	RUBBER HOSE, 20 MM LONG FOR CABLE FROM CABLE CONNECTOR TO BACK-UP LIGHT SWITCH OR STARTER SIDE TO MAIN CABLE HARNESS RESP. ORDER BY THE METER	003
20	A 180 540 00 08	CABLE HARNESS FROM GENERATOR TO GOVERNOR	001
21	A 000 546 02 35	RUBBER PROTECTIVE CAP FOR TERMINAL TO GENERATOR D POS. AND DF	002
-----		INSULATING HOSE, 220-MM LONG B 10X11,4 SW DIN 40621 FOR CABLE TO BLINKER LIGHT ORDER BY THE METER	001
-----		INSULATING HOSE 40-MM LONG B 12X13,6 DIN 40621 FOR MAIN CABLE HARNESS THROUGH WHEEL ARCH PAN, LEFT AND RIGHT ORDER BY THE METER	004
-----		INSULATING HOSE, 100-MM LONG B 16X18 SW DIN 40621 FOR MAIN CABLE HARNESS, ROTARY SWITCH ORDER BY THE METER	001
-----	A 186 997 04 81	REPLACED BY 186 997 06 81 TOGETHER WITH 2 GROMMET 186 997 07 81
23	A 120 540 17 38	CABLE HARNESS FROM CABLE CONNECTOR, 2 POLES, TO BACK-UP LIGHT	001
-----	A 180 540 31 38	CABLE HARNESS FROM CABLE CONNECTOR, 2 POLES, TO BACK-UP LIGHT	001
24	A 180 546 00 43	BRACKET FOR CABLE HARNESS, BACK-UP LIGHT	001
25	A 000 997 31 81	GROMMET FOR CABLE HARNESS TO BRACKET	001
-----	A 000 988 28 78	FIXING CLAMP FROM CABLE CONNECTOR TO BACK-UP LIGHT SWITCH	001
-----	A 180 997 15 82	RUBBER HOSE, 20 MM LONG FROM CABLE CONNECTOR TO BACK-UP LIGHT SWITCH TO MAIN CABLE HARNESS Replaced by: A 000 997 47 82
-----	A 000 997 47 82	RUBBER HOSE, 20 MM LONG FROM CABLE CONNECTOR TO BACK-UP LIGHT SWITCH TO MAIN CABLE HARNESS ORDER BY THE METER	001
-----		FIXING CLAMP 1X8 DIN 72571 FOR CABLE, INCREASE OF REVOLUTION TO BRACKET	001
-----		CYLINDRICAL SCREW AM 4X10 DIN 84-4 S FOR CABLE, INCREASE OF REVOLUTION TO BRACKET	001
-----		LOCK WASHER B 4 DIN 127 FOR CABLE, INCREASE OF REVOLUTION TO BRACKET	001
-----	A 186 995 02 20	FIXING CLAMP FOR CAPILLARY TUBE AND CABLE HARNESS TO BRACKET FOR INJECTION PIPES	002
26	A 186 540 03 41	GROUND CABLE FROM STARTER FLANGE TO FRONT WALL	001
27	A 120 420 02 27	SCREW WITH LOCKING PLATE FOR GROUND CABLE TO FRONT WALL	001
-----		LOCK WASHER B 6 DIN 127 FOR GROUND CABLE TO FRONT WALL	001
-----		HEX. NUT M 6 DIN 934-5 S FOR GROUND CABLE TO FRONT WALL	001
-----	A 120 420 02 27	SCREW WITH LOCKING PLATE FOR GROUND CABLE, HEADLIGHT AND FOGLIGHT TO WHEEL ARCH PAN	001
-----		LOCK WASHER B 6 DIN 127 FOR GROUND CABLE, HEADLIGHT AND FOGLIGHT TO WHEEL ARCH PAN	001
-----		HEX. NUT M 6 DIN 934-5 S FOR GROUND CABLE, HEADLIGHT AND FOGLIGHT TO WHEEL ARCH PAN	001
28	A 128 540 00 38	GROUND CABLE FOR FUEL PUMP	001
-----		LENS-HD. SCREW AM 6X10 DIN 7985-4 S FOR GROUND CABLE, FUEL PUMP	001
-----		LOCK WASHER B 6 DIN 127 FOR GROUND CABLE, FUEL PUMP	001
-----	A 000 987 02 32	HOSE PIECE, 20 MM LONG FOR GROUND CABLE, FUEL PUMP ORDER BY THE METER	001
-----	A 000 997 31 81	GROMMET FOR GROUND CABLE, FUEL PUMP THROUGH SPARE WHEEL RECESS	001
29	A 120 993 02 25	SPRING CLIP FOR CAPILLARY TUBE AND CABLE TO "THERMO" SWITCH	009
30	A 000 545 07 45	CABLE SLEEVE ABOVE CABLE TO "THERMO" SWITCH	001
-----	A 000 546 02 35	RUBBER PROTECTIVE CAP ABOVE CABLE TO "THERMO" SWITCH	002
31	A 000 546 19 41	CABLE CONNECTOR, 5 POLES FOR TAILLIGHT CABLE HARNESS	001
32	A 000 546 32 41	CABLE CONNECTOR, 8-POLES FOR TAILLIGHT CABLE HARNESS	001
-----	A 000 546 06 41	CABLE CONNECTOR, 5 POLES FOR STEERING SPINDLE HARNESS UP TO CHASSIS 002429	001
34	A 000 546 35 41	CABLE CONNECTOR, 3 POLES FOR HEATING BLOWER CONNECTION	002
-----		LENS-HD. SHEET METAL SCREW BZ 3,9X9,5 DIN 7981 FOR CABLE CONNECTOR TO FRONT WALL OR STRUT, RESP.	004
-----		LENS-HD. SHEET METAL SCREW B 3,9X19 DIN 7981 FOR CABLE CONNECTOR, 5 POLES TO WHEEL ARCH PAN	002
37	A 181 997 00 81	GROMMET FOR MAIN CABLE HARNESS THROUGH FRONT WALL	001
38	A 000 997 27 81	GROMMET FOR MAIN CABLE HARNESS THROUGH FRONT WALL	001
39	A 000 988 53 78	FIXING CLAMP WITH LUG FOR MAIN CABLE HARNESS THROUGH FRONT WALL	003
40	A 000 988 34 78	FIXING CLAMP FOR MAIN CABLE HARNESS THROUGH FRONT WALL	003
-----	A 000 997 17 81	GROMMET FOR FUEL TRANSMITTER CABLE Replaced by: A 000 997 18 81
42	A 000 997 18 81	GROMMET FOR FUEL TRANSMITTER CABLE	001
-----		LENS-HD. SHEET METAL SCREW B 4,8X9,5 DIN 7981 FOR GROUND CABLE, TRANSMITTER TO REAR CROSS MEMBER	001
-----		LENS-HD. SHEET METAL SCREW B 3,9X13 DIN 7981 FOR CABLE CONNECTOR 3-POLES TO WHEEL ARCH PAN	004
46	A 000 988 33 78	FIXING CLAMP FOR TAILLIGHT CABLE HARNESS TO LUGGAGE COMPARTMENT COVER PLATE AND CABLE TO HORN	008
47	A 000 988 34 78	FIXING CLAMP FOR TAILLIGHT CABLE HARNESS TO LUGGAGE COMPARTMENT COVER PLATE AND CABLE TO HORN	005
56	A 120 546 01 82	BRACKET FOR TAILLIGHT CABLE HARNESS, LEFT AND RIGHT	008
-----		LENS-HD. SCREW AM 4X10 DIN 7985-4 S FOR GROUND CONNECTION TO LUGGAGE COMPARTMENT, TAILLIGHT	002
-----		LOCK WASHER B 4 DIN 127 FOR GROUND CONNECTION TO LUGGAGE COMPARTMENT, TAILLIGHT	002
-----		HEX. NUT M 4 DIN 934-5 S FOR GROUND CONNECTION TO LUGGAGE COMPARTMENT, TAILLIGHT	002
-----	A 000 997 17 81	GROMMET FOR TAILLIGHT CABLE HARNESS IN COVER BOX FOR BOW LIGHT	001
-----	A 000 997 22 81	GROMMET FOR TAILLIGHT CABLE HARNESS THROUGH WHEEL ARCH PAN, LEFT AND RIGHT	002
-----	A 000 989 46 85	TEROSTAT LACE, DIA. 6-MM, 50-MM LONG FOR TAILLIGHT CABLE HARNESS THROUGH WHEEL ARCH PAN, REAR ORDER BY THE METER	002
61	A 120 546 00 81	COVER PLATE FOR PROTECTIVE PLATE TO REAR CROSS MEMBER	001
-----		LENS-HD. SHEET METAL SCREW B 3,9X13 DIN 7981 FOR PROTECTIVE PLATE TO REAR CROSS MEMBER	002
62	A 186 995 02 20	FIXING CLAMP FOR CABLE TO CONTROL SWITCH TO REAR CROSS MEMBER	003
-----		LENS-HD. SHEET METAL SCREW B 3,9X13 DIN 7981 FOR CABLE TO CONTROL SWITCH TO REAR CROSS MEMBER	003
63	A 136 995 00 37	FIXING CLAMP FOR MAIN CABLE HARNESS THROUGH FRONT WALL	001
-----		LENS-HD. SCREW AM 4X12 DIN 7985-4 S FOR MAIN CABLE HARNESS THROUGH FRONT WALL	001
-----		LOCK WASHER B 4 DIN 127 FOR MAIN CABLE HARNESS THROUGH FRONT WALL	001
66	A 136 995 01 35	FIXING CLAMP FOR MAIN CABLE HARNESS THROUGH FRONT WALL	001
-----		LENS-HD. SCREW AM 6X15 DIN 7985-4 S FOR MAIN CABLE HARNESS THROUGH FRONT WALL	001
-----		LOCK WASHER B 6 DIN 127 FOR MAIN CABLE HARNESS THROUGH FRONT WALL	001
67	A 000 990 22 91	CAGE CLIP WITH NUT FOR MAIN CABLE HARNESS THROUGH FRONT WALL	001
68	A 136 995 01 35	FIXING CLAMP FOR MAIN CABLE HARNESS TO GLOVE COMPARTMENT	001
-----		LENS-HD. SCREW AM 6X15 DIN 7985-4 S FOR MAIN CABLE HARNESS TO GLOVE COMPARTMENT	001
-----		LOCK WASHER B 6 DIN 127 FOR MAIN CABLE HARNESS TO GLOVE COMPARTMENT	001
-----	A 001 988 09 78	FIXING CLAMP FOR CABLE, STOP SWITCH TO BRAKE PIPE	002
-----	A 128 540 03 50	Replaced by: A 128 540 00 50
-----	A 128 540 01 50	FUSE BOX Replaced by: A 128 540 00 50
71	A 128 540 00 50	FUSE BOX	001
72	A 000 545 02 03	COVER FOR FUSE BOX	001
-----		FUSE, 12 AMP. 8 DIN 72581	010
-----		FUSE, 12 AMP. 25 DIN 72581	002
-----		LENS-HD. SCREW AM 4X12 DIN 85-4 S FOR CABLES TO FUSE BOX	017
-----		TOOTHED WASHER J 4,3 DIN 6797 FOR CABLES TO FUSE BOX	017
INSTRUMENTS AND SWITCHES
-----	A 120 540 00 44	Replaced by: A 000 545 06 11
-----	A 180 540 01 44	Replaced by: A 000 545 06 11
-----	A 128 540 00 44	PUSH SWITCH FOR INSTRUMENT LIGHTING Replaced by: A 000 545 06 11
80	A 000 545 06 11	PUSH SWITCH FOR INSTRUMENT LIGHTING	001
81	A 120 545 00 72	ESCUTCHEON	001
82	A 000 997 20 40	FELT RING	001
-----	A 120 545 02 37	BUTTON UP TO CHASSIS 002429	001
-----		LENS-HD. SCREW AM 4X6 DIN 85-4 S	010
-----		TOOTHED WASHER 4,3 DIN 6797	010
84	A 128 542 00 01	COMBI INSTRUMENT WITH READING IN KILOMETERS MEASURING RANGE 180 KM RATIO 0.935	001
-----	A 128 542 06 01	COMBI INSTRUMENT WITH READING IN KILOMETERS MEASURING RANGE 180 KM RATIO 0.935	001
-----	A 128 542 01 01	COMBI INSTRUMENT WITH READING IN MILES RATIO 1.50	001
-----	A 128 542 07 01	COMBI INSTRUMENT WITH READING IN MILES RATIO 1.50	001
-----	A 128 542 02 01	COMBI INSTRUMENT WITH READING IN KILOMETERS RATIO 0.88 FOR TIRES 6.40-15 EXPORT, SPECIAL REQUEST	001
-----	A 128 542 03 01	COMBI INSTRUMENT WITH READING IN MILES RATIO 1.425 FOR TIRES 6.40-15 EXPORT, SPECIAL REQUEST	001
-----	A 002 542 29 06	KILOMETER COUNTER WITH COMBI INSTRUMENT HOUSING	001
-----	A 002 542 30 06	MILEAGE COUNTER WITH COMBI INSTRUMENT HOUSING	001
-----	A 002 542 31 06	KILOMETER COUNTER WITH COMBI INSTRUMENT HOUSING EXPORT, SPECIAL REQUEST FOR TIRES 6.40-15	001
-----	A 002 542 32 06	MILEAGE COUNTER WITH COMBI INSTRUMENT HOUSING EXPORT, SPECIAL REQUEST FOR TIRES 6.40-15	001
-----	A 002 542 81 06	KILOMETER COUNTER WITH CONTACT WARNING LIGHT WITH COMBI INSTRUMENT HOUSING	001
-----	A 002 542 82 06	MILEAGE COUNTER WITH CONTACT WARNING LIGHT WITH COMBI INSTRUMENT HOUSING	001
85	A 000 542 91 02	OIL PRESSURE GAUGE	001
-----	A 000 542 92 02	OIL PRESSURE GAUGE WITH READING IN ENGLISH	001
86	A 001 542 93 05	TELE-THERMOMETER, DEG. C	001
-----	A 001 542 94 05	TELE-THERMOMETER, DEG. F	001
87	A 000 542 62 03	FUEL GAUGE	001
88	A 180 542 00 39	FRAME FOR COMBI INSTRUMENT	001
89	A 120 993 17 10	TENSION SPRING FOR COMBI INSTRUMENT	002
90	A 180 542 01 80	RUBBER FRAME FOR COMBI INSTRUMENT	001
-----	A 000 545 08 19	LAMP SOCKET Replaced by: A 000 545 07 19
91	A 000 545 07 19	LAMP SOCKET	008
-----		BULB H 12 V 2 W DIN 72601	007
-----	A 180 542 02 11	CLOCK, ELECTRIC UP TO CHASSIS 002429	001
-----	A 183 545 00 19	LAMP SOCKET Replaced by: A 000 545 07 19
101	A 000 545 07 19	LAMP SOCKET	001
-----		BULB H 12 V 2 W DIN 72601	001
102	A 000 997 31 81	GROMMET FOR CLOCK CABLE THROUGH FRONT WALL	001
103	A 000 997 18 81	GROMMET FOR KILOMETER COUNTER TRIP RESET, THROUGH COVER PLATE	001
104	A 120 545 02 37	BUTTON FOR KILOMETER COUNTER TRIP RESET UP TO CHASSIS 002429	001
105	A 120 545 00 72	ESCUTCHEON FOR KILOMETER COUNTER TRIP RESET	001
106	A 000 997 20 40	FELT RING FOR KILOMETER COUNTER TRIP RESET	001
-----		WASHER 8,4 DIN 433 FOR KILOMETER COUNTER TRIP RESET	001
-----		HEX. NUT M 8X1 DIN 936-5 S FOR KILOMETER COUNTER TRIP RESET	001
109	A 000 545 09 31	DIMMING RESISTOR FOR INSTRUMENT LIGHTING	001
-----	A 000 545 17 14	PUSH-BUTTON SWITCH	001
-----	A 120 545 03 72	ESCUTCHEON FOR PUSH-BUTTON SWITCH	001
-----	A 180 990 15 40	WASHER FOR PUSH-BUTTON SWITCH	001
-----	A 000 545 76 24	DISTANCE LIGHT BLINKER SWITCH UP TO CHASSIS 002429	001
-----	A 180 462 00 23	COVER PLATE FOR DISTANCE LIGHT BLINKER SWITCH UP TO CHASSIS 002429	001
-----		LENS-HD. COUNTERSUNK SCREW AM 4X10 DIN 7988-4 S VERCHROMT FOR COVER PLATE TO JACKET TUBE UP TO CHASSIS 002429	002
-----	A 180 545 02 37	BLINKER LEVER KNOB, DARK GRAPHITE GREY Replaced by: A 180 545 04 37
114	A 180 545 04 37	BLINKER LEVER KNOB, DARK GRAPHITE GREY	001
-----	A 180 545 05 37	BLINKER LEVER KNOB, IVORY COLOURED SPECIAL REQUEST	001
116	A 000 544 23 32	BLINKER TRANSMITTER,	001
-----	A 000 545 91 24	RESET SWITCH UP TO CHASSIS 002429 [003] TURN IÑDICATOR BLINKER LIGHTS WITH AUTOMATIC CUT OUT FOR THE U.S.A.	001
-----	A 180 540 16 09	ADDITIONAL CABLE HARNESS UP TO CHASSIS 002429 [003] TURN IÑDICATOR BLINKER LIGHTS WITH AUTOMATIC CUT OUT FOR THE U.S.A.	001
-----		HEX. -HD. SCREW M 6X12 DIN 933-8 G FOR BLINKER TRANSMITTER TO BRACKET, PARTITION WALL	002
-----		LOCK WASHER B 6 DIN 127 FOR BLINKER TRANSMITTER TO BRACKET, PARTITION WALL	002
-----	A 128 540 02 60	OIL PRESSURE GAUGE PIPE FROM INSTRUMENT TO HOSE	001
-----	A 128 540 03 60	OIL PRESSURE GAUGE PIPE FROM INSTRUMENT TO CONNECTION PIECE	001
123	A 128 542 00 47	CONNECTION PIECE FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9500853	001
-----	A 120 540 06 60	OIL PRESSURE GAUGE PIPE FROM CONNECTION PIECE TO HOSE	001
-----		SPRING WASHER A 8 DIN 137 FOR OIL PRESSURE GAUGE PIPE AND HOSE TO BRACKET	002
-----		HEX. NUT BM 8 DIN 439-5 S FOR OIL PRESSURE GAUGE PIPE AND HOSE TO BRACKET	001
-----	A 000 987 09 32	RUBBER HOSE, 25 MM LONG FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL Replaced by: A 000 987 00 32
127	A 000 987 00 32	RUBBER HOSE, 25 MM LONG FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL ORDER BY THE METER	001
127	A 000 987 00 32	RUBBER HOSE, 25 MM LONG FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL ORDER BY THE METER	002
-----	A 136 995 02 20	FIXING CLAMP FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL Replaced by: A 136 995 05 01
128	A 136 995 05 01	FIXING CLAMP FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL	001
128	A 136 995 05 01	FIXING CLAMP FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL	002
-----		LENS-HD. SHEET METAL SCREW BZ 3,9X9,5 DIN 7981 FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL	001
-----		LENS-HD. SHEET METAL SCREW BZ 3,9X9,5 DIN 7981 FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL	002
-----	A 186 997 05 81	GROMMET FOR CAPILLARY TUBE THROUGH BRACKET Replaced by: A 186 997 06 81
-----	A 186 997 06 81	GROMMET FOR CAPILLARY TUBE THROUGH BRACKET CUT OPEN IF NECESSARY	001
130	A 128 540 00 59	HOSE FOR OIL PRESSURE GAUGE PIPE	001
-----	A 121 540 02 59	HOSE FOR OIL PRESSURE GAUGE PIPE	001
131	A 000 545 22 09	STOP LIGHT SWITCH SEE ALSO GROUP 42	001
132	A 000 545 04 12	FOOT DIMMER SWITCH OPTIONAL	001
-----	A 000 545 08 12	FOOT DIMMER SWITCH OPTIONAL	001
133	A 136 545 01 58	INSULATING PLATE FOR FOOT DIMMER SWITCH AT PEDAL FLOOR	001
-----		LENS-HD.COUNTERSUNK SCREW BM 4X30 DIN 7988-4 S FOR FOOT DIMMER SWITCH AT PEDAL FLOOR	002
-----	A 000 997 27 81	GROMMET FOR CABLE TO FOOR DIMMER SWITCH	001
-----	A 180 542 03 07	FLEXIBLE DRIVE SHAFT FOR SPEEDOMETER Replaced by: A 180 542 07 07
137	A 180 542 07 07	FLEXIBLE DRIVE SHAFT FOR SPEEDOMETER	001
138	A 180 997 12 81	GROMMET FOR TACHOMETER SHAFT THROUGH FORK SUPPORT	002
139	A 180 987 00 44	GROMMET FOR LOCKING PASSAGE OF 3RD FORK SUPPORT	001
140	A 120 995 00 05	FIXING CLAMP FOR FLEXIBLE DRIVE SHAFT TO BODY FRONT END	001
-----		LENS-HD. SCREW AM 6X12 DIN 7985-4 S FOR FLEXIBLE DRIVE SHAFT TO BODY FRONT END	001
141	A 000 988 34 78	FIXING CLAMP FOR FLEXIBLE DRIVE SHAFT AT PEDAL FLOOR BOTTOM, RIGHT	001
142	A 000 990 25 91	CAGE CLIP WITH NUT FOR FLEXIBLE DRIVE SHAFT AT PEDAL FLOOR BOTTOM, RIGHT	002
-----	A 000 997 31 81	GROMMET FOR FLEXIBLE DRIVE SHAFT AT PEDAL FLOOR	001
-----	A 186 997 04 81	GROMMET FOR FLEXIBLE DRIVE SHAFT THROUGH CROSS MEMBER	001
143	A 000 154 94 06	3-ELEMENT VOLTAGE	001
145	A 000 154 02 50	GROMMET WITH	003
-----		LOCK WASHER B 6 DIN 127 FOR REGULATOR AT BRACKET, WHEEL ARCH PAN	003
-----		LENS-HD. SCREW AM 6X20 DIN 7985-4S FOR REGULATOR AT BRACKET, WHEEL ARCH PAN	003
148	A 000 997 07 81	GROMMET FOR CABLE, VOLTAGE REGULATOR, GENERATOR	003
149	A 000 545 05 25	SOCKET FOR HAND LIGHT	001
150	A 000 542 33 20	LOUD BLAST HORN LOW SOUND	001
-----	A 000 542 34 20	LOUD BLAST HORN HIGH SOUND	001
-----	A 001 542 09 20	LOUD BLAST HORN LOW SOUND SPECIAL REQUEST SIGNAL SYSTEM FOR CARS EXPORTED TO FRANCE	001
-----	A 001 542 10 20	LOUD BLAST HORN MIDDLE SOUND SPECIAL REQUEST SIGNAL SYSTEM FOR CARS EXPORTED TO FRANCE	001
-----		HEX.-HD. SCREW M 10X28 DIN 931-8 G FOR LOUD BLAST HORN AT BRACKET	002
-----		LOCK WASHER B 10 DIN 127 FOR LOUD BLAST HORN AT BRACKET	002
-----		HEX. NUT M 10 DIN 934-5 S FOR LOUD BLAST HORN AT BRACKET	002
-----		LOCK WASHER B 4 DIN 127 FOR CABLE CONNECTION AT LOUD BLAST HORN	004
-----		CYLINDRICAL SCREW AM 4X6 DIN 84-4 S FOR CABLE CONNECTION AT LOUD BLAST HORN	004
155	A 000 988 33 78	FIXING CLAMP FOR CABLE TO HORN	001
160	A 000 158 06 03	IGNITION COIL	001
161	A 000 158 02 40	FIXING CLAMP FOR IGNITION COIL	001
-----		CYLINDRICAL SCREW AM 5X40 DIN 84-4 S	001
-----		SQUARE NUT M 5 DIN 562	001
-----		HEX.-HD. SCREW M 6X12 DIN 933-8 G FOR IGNITION COIL AT BRACKET	002
-----		LOCK WASHER B 6 DIN 127 FOR IGNITION COIL AT BRACKET	002
-----		WASHER A 6,4 DIN 9021 FOR IGNITION COIL AT BRACKET	002
162	A 000 546 02 35	RUBBER PROTECTIVE CAP FOR IGNITION COIL	002
163	A 000 158 01 45	COMPENSATING RESISTANCE	001
164	A 180 158 00 40	BRACKET FOR COMPENSATING RESISTANCE	001
-----		LENS-HD. SHEET METAL SCREW B 3,5X6,5 DIN 7981 FOR COMPENSATING RESISTANCE AT SUPPORT	002
165	A 180 546 00 02	ELECTRICAL CABLE FOR COMPENSATING RESISTANCE, IGNITION COIL	001
-----	A 000 542 27 19	RELAY FOR AUTOMATIC STARTING ASSISTANCE WITH DAMPING RESISTOR Replaced by: A 000 542 36 19
170	A 000 542 36 19	RELAY FOR AUTOMATIC STARTING ASSISTANCE WITH DAMPING RESISTOR	001
171	A 180 544 02 38	BRACKET FOR RELAY	001
-----		CYLINDRICAL SCREW AM 4X20 DIN 84-4S FOR RELAY AT BRACKET	002
-----		LOCK WASHER B 4 DIN 127 FOR RELAY AT BRACKET	002
-----		HEX. NUT M 4 DIN 934-5 S FOR RELAY AT BRACKET	002
-----	A 000 542 27 19	RELAY FOR CONTROL SWITCH AND HIGHER NUMBER OF REVOLUTION UP TO CHASSIS 9501239	002
-----		FOR CONTROL SWITCH FROM CHASSIS 9501240-002429	001
-----	A 000 542 36 19	RELAY FOR HIGHER NUMBER OF REVOLUTION FROM CHASSIS 9501240	001
-----		LENS-HD. SCREW AM 4X18 DIN 7985-4 S FOR RELAIS AT LEFT WHEEL ARCH PAN	002
-----		LOCK WASHER B 4 DIN 127 FOR RELAIS AT LEFT WHEEL ARCH PAN	002
-----		HEX. NUT M 4 DIN 934-5 S FOR RELAIS AT LEFT WHEEL ARCH PAN	002
-----	A 000 545 82 24	REPLACED BY 001 545 12 24 TOGETHER WITH 1 TIGHTENING WASHER 128 350 00 67 UP TO CHASSIS 002534
175	A 001 545 12 24	CONTROL SWITCH AT REAR AXLE SUSPENSION, CENTER, TOP FROM CHASSIS 002535	001
-----	A 000 545 02 38	GUIDE CAP	001
176	A 000 545 00 78	OPERATION ROD	001
177	A 000 545 00 97	TENSION SPRING	001
178	A 000 545 02 38	GUIDE CUP FOR CONTROL SWITCH AT REAR AXLE SUSPENSION, CENTER, TOP	001
-----		HEX.-HD. SCREW M 6X10 DIN 933-8 G FOR CONTROL SWITCH AT REAR AXLE SUSPENSION, CENTER, TOP	001
-----		WASHER 6,4 DIN 125 FOR CONTROL SWITCH AT REAR AXLE SUSPENSION, CENTER, TOP	001
-----		LOCK WASHER B 6 DIN 127 FOR CONTROL SWITCH AT REAR AXLE SUSPENSION, CENTER, TOP	001
180	A 000 545 68 15	TEMPERATURE-WARNING LIGHT FOR "SWITCH BACK" AT JACKET TUBE	001
-----	A 000 545 69 15	TEMPERATURE-WARNING LIGHT WITH ENGLISH INSCRIPTION FOR "SWITCH BACK" AT JACKET TUBE	001
182	A 000 545 11 19	LAMP SOCKET FOR WARNING LIGHT	001
-----		BULB H 12 V 2 W DIN 72601 FOR WARNING LIGHT	001
-----	A 000 997 01 81	GROMMET FOR WARNING LIGHT	002
-----	A 000 546 00 42	CABLE CONNECTOR FOR CABLE FROM SHIFTING LEVER TO CONTROL VALVE	001
-----	A 000 988 38 78	FIXING CLAMP FOR CABLE TO LIMIT SWITCH	001
185	A 000 545 30 01	FUSE BOX FOR HIGHER NUMBER OF REVOLUTIONS FROM CHASSIS 9501240	001
-----		FUSE 8 AMP. 8 DIN 72581 FROM CHASSIS 9501240	001
-----		FUSE 25 AMP. 25 DIN 72481 FROM CHASSIS 9501240	001
186	A 128 540 00 73	BRACKET FOR RELAY AND FUSE BOX FROM CHASSIS 9501240	001
187	A 128 545 04 40	BRACKET FOR FUSE BOX AT BRACKET, BLINKER TRANSMITTER FROM CHASSIS 9501240	001
-----		CYLINDRICAL SCREW AM 4X15 DIN 84-4 S FOR FUSE BOX AT BRACKET FROM CHASSIS 9501240	002
-----		HEX. NUT M 4 DIN 934-5 S FOR FUSE BOX AT BRACKET FROM CHASSIS 9501240	002
188	A 128 545 05 40	BRACKET FOR ELECTRICAL CABLE AT OIL FILTER FROM CHASSIS 9501240	001
-----	A 186 995 04 01	FIXING CLAMP AT BRAKE MAGNET FOR ELECTRICAL CABLE FROM BRAKE MAGNET TO BRACKET FROM CHASSIS 9501240	001
-----		FIXING CLAMP A 3 N 285 B AT VENTILATION PLATE FOR ELECTRICAL CABLE FROM BRAKE MAGNET TO BRACKET FROM CHASSIS 9501240	001
-----		FIXING CLAMP A 2 N 285 B FOR ELECTRICAL CABLE FROM BRAKE MAGNET TO BRACKET FROM CHASSIS 9501240	001
-----		LENS-HD. SCREW AM 4X10 DIN 7985-4 S FOR ELECTRICAL CABLE FROM BRAKE MAGNET TO BRACKET FROM CHASSIS 9501240	001
-----		LOCK WASHER B 4 DIN 127 FOR ELECTRICAL CABLE FROM BRAKE MAGNET TO BRACKET FROM CHASSIS 9501240	001
-----		HEX. NUT M 4 DIN 934-5 S FOR ELECTRICAL CABLE FROM BRAKE MAGNET TO BRACKET FROM CHASSIS 9501240	001
-----		FIXING CLAMP A 2 N 285 B FOR CABLE HAMESS AT BRACKET SERVO-AGGREGATE FROM CHASSIS 9501240	001
-----		LENS-HD. SCREW AM 4X12 DIN 7985-4 S FOR CABLE HAMESS AT BRACKET SERVO-AGGREGATE FROM CHASSIS 9501240	001
-----		LOCK WASHER B 4 DIN 127 FOR CABLE HARNESS AT BRACKET SERVO-AGGREGATE FROM CHASSIS 9501240	001
-----		HEX. NUT M 4 DIN 934 - 5 S FOR CABLE HARNESS AT BRACKET SERVO-AGGREGATE FROM CHASSIS 9501240	001
-----	A 000 542 27 19	CONTACTOR 12 V FOR EXPORT CARS WITH BLINKER SYSTEM TO AUSTRIA AND PORTUGAL	001
-----		ELECTRICAL CABLE ORDER BY THE METER B 1 DIN 72551 SW 80 MM LONG FROM TELAY TEMINAL 30 TO RELAY TERMINAL 86 FOR EXPORT CARS WITH BLINKER S	001
-----		TERMINAL 4 X 0,8 N 261 FOR EXPORT CARS WITH BLINKER SYSTEM TO AUSTRIA AND PORTUGAL	005
-----	A 000 997 01 81	GROMMET FOR EXPORT CARS WITH BLINKER SYSTEM TO AUSTRIA AND PORTUGAL	005
-----	A 121 540 17 09	AUXILIARY CABLE HARNESS FOR EXPORT CARS WITH FOK LIGHT TO THE U.S.A.	001
-----		INSULATING HOSE 100-MM LONG ABOVE MAIN CABLE HARNESS ROTARY SWITCH B 20 X 22,4 SW DIN 40 621 ORDER BY THE METER FOR EXPORT CARS WITH FOK	001
-----	A 000 545 03 01	FUSE BOX, 2-POLE FOR EXPORT CARS WITH FOK LIGHT TO THE U.S.A.	001
-----		CYLINDRICAL SCREW AM 4X15 DIN 84 - 4 S FOR FUSE BOX AT AIR DUCT, LEFT FOR FUSE BOX AT AIR DUCT, LEFT UP TO CHASSIS 002429FOR EXPORT CARS W	001
DOUBLE TUNE HORN
-----	A 000 542 09 99	DOUBLE TUNE HORN, BLACK, WITH PROTECTIVE SCREEN SPECIAL REQUEST	001
-----	A 000 542 10 99	DOUBLE TUNE HORN, BLACK, WITHOUT PROTECTIVE SCREEN 1
-----	A 000 542 11 99	DOUBLE TUNE HORN, CHROMIUM PLATED, WITH PROTECTIVE SCREEN 1
-----	A 000 542 27 19	RELAY SWITCH 12 VOLT	001
-----	A 000 545 10 11	PUSH-PULL FLOW-OVER	001
-----	A 180 544 01 38	BRACKET FOR PUSH-PULL SWITCH VALID ONLY FOR CARS WITHOUT WINDSCREEN WIPER SYSTEM	001
-----	A 180 540 05 73	BRACKET, LEFT	001
-----	A 180 540 06 73	BRACKET, RIGHT	001
-----		HEX. -HD. SCREW M 10X25 DIN 931-8 G FOR DOUBLE TUNE HORN AT BRACKET	002
-----		LOCK WASHER B 10 DIN 127 FOR DOUBLE TUNE HORN AT BRACKET	002
-----		HEX. NUT M 10 DIN 934-5 S FOR DOUBLE TUNE HORN AT BRACKET	002
-----		ELECTRICAL CABLE 5000-MM LONG A 1,5 DIN 72551 SW ORDER BY THE METER	001
-----		ELECTRICAL CABLE 1000-MM LONG A 2,5 DIN 72551 SW ORDER BY THE METER	001
-----		ELECTRICAL CABLE 3250-MM LONG A 1 DIN 72551 SW ORDER BY THE METER	001
-----		CABLE TERMINAL 4 X 0,8 N 261	008
-----		CABLE TERMINAL 6 X 0,8 N 261	001
-----		INSULATING HOSE 2,500-MM LONG B 8X9 SW DIN 40621 ORDER BY THE METER	001
-----		INSULATING HOSE 2,000-MM LONG B 6X7 SW DIN 40621 ORDER BY THE METER	001
-----		CABLE CONNECTOR 1-POLE B 1 DIN 72586	001
-----	A 000 997 03 81	GROMMET	001
-----	A 000 997 21 81	GROMMET	002
-----		CABLE TERMINAL 4 X 1 N 261	005