UNDERPAN [Car] MERCEDES [EUROPA] [CHASSIS]TYP 219


UNDERPAN [Car] MERCEDES [EUROPA] [CHASSIS]TYP 21950512251494645181135911517652103118a35b35a
Item no. Part number Designation/description Quant information
UNDERPAN-EXPORT, SPECIAL REQUEST
1 A 180 330 00 83  SLIDING PROTECTION,
FRONT TOWING CLAMP FOR SUB-FRAME, OIL PAN 		001
2 A 180 331 00 75  FIXING SHACKLE
FOR SLIDING PROTECTION AT SUB-FRAME, FRONT 		001
----- HEX. -HD. SCREW
M 10X25 DIN 933-8 G FOR SLIDING PROTECTION AT SUB-FRAME, FRONT 		001
----- LOCK WASHER
B 10 DIN 127 FOR SLIDING PROTECTION AT SUB-FRAME, FRONT 		001
5 A 120 330 00 56  COVER, LATERAL
FOR UNDERPAN, SUB-FRAME 		002
6 A 120 331 01 75  FIXING SHACKLE
FOR COVER, LATERAL AT SUB-FRAME 		002
----- HEX. -HD. SCREW
M 6X35 DIN 933-8 G FOR COVER, LATERAL AT SUB-FRAME 		002
----- LOCK WASHER
B 6 DIN 127 FOR COVER, LATERAL AT SUB-FRAME 		002
9 A 180 524 04 33  COVER PLATE, LEFT
FOR UNDERPAN BETWEEN FRONT CROSS TUBE AND SUBFRAME 		001
10 A 180 524 03 33  COVER PLATE, RIGHT
FOR UNDERPAN BETWEEN FRONT CROSS TUBE AND SUBFRAME 		001
----- LENS-HD. SHEET
METAL SCREW B 5, 5X9,5 DIN 7981 FOR COVER PLATE AT CROSS TUBE 		004
11 A 180 431 00 62  UNDERPAN
FOR MASTER CYLINDER
----- A 180 431 01 62  UNDERPAN
FOR MASTER CYLINDER
----- LENS-HD. SHEET
METAL SCREW BZ 3,9X9,5 DIN 7981 FOR UNDERPAN, MASTER CYLINDER AT FORKED SUPPORT 		005
----- A 180 520 01 75  REPLACED BY
180 520 12 75 TOGETHER WITH 6 WELDED BOLT M 8X17 180 524 00 74 6 CERAMIC RING 180 524 00 76 6 WASHER 9,5 DIN 126 6 HEX.
----- A 180 520 07 75  REPLACED BY
180 520 12 75 TOGETHER WITH 6 WELDED BOLT M 8X17 180 524 00 74 6 CERAMIC RING 180 524 00 76 6 WASHER 9,5 DIN 126 6 HEX.
15 A 180 520 12 75  UNDERPAN - CENTER
FOR CLUTCH AND TRANSMISSION
----- A 180 520 02 75  REPLACED BY
180 520 13 75 TOGETHER WITH 6 WELDED BOLT M 8X17 180 524 00 74 6 CERAMIC RING 180 524 00 76 6 WASHER 9,5 DIN 126 6 HEX.
----- A 180 520 08 75  REPLACED BY
180 520 13 75 TOGETHER WITH 6 WELDED BOLT M 8X17 180 524 00 74 6 CERAMIC RING 180 524 00 76 6 WASHER 9,5 DIN 126 6 HEX.
----- A 180 520 13 75  UNDERPAN - CENTER
FOR CLUTCH AND TRANSMISSION
17 A 120 524 02 12  REINFORCEMENT PLATE
IS WELDED WITH FRAME FOR UNDERPAN AT FORKED SUPPORT TO 180 520 01 75 180 520 02 75 180 520 07 75 180 520 08 75 		006
----- HEX. -HD. SCREW
M 8X15 DIN 933-8G FOR UNDERPAN AT FORKED SUPPORT TO 180 520 01 75 180 520 02 75 180 520 07 75 180 520 08 75 		006
----- A 180 524 00 74  WELDED BOLT M 8X17
TO 180 520 12 75 180 520 13 75 		006
----- A 180 524 00 76  CERAMIC RING
FOR PROTECTION WHEN WELDING THE BOLTS TO 180 520 12 75 180 520 13 75 		006
----- WASHER
9,5 DIN 126 FOR UNDERPAN AT FORKED SUPPORT TO 180 520 12 75 180 520 13 75 		006
----- LOCK WASHER
B 8 DIN 127 FOR UNDERPAN AT FORKED SUPPORT 		006
----- HEX. NUT
M 8 DIN 70616-5 S FOR UNDERPAN AT FORKED SUPPORT TO 180 520 12 75 180 520 13 75 		006
18 A 180 350 03 83  UNDERPAN
FOR REAR AXLE HOUSING 		001
18a A 000 987 65 40  RUBBER BUFFER 001
----- HEX. -HD. SCREW
M 10X20 DIN 933-8 G FOR UNDERPAN, REAR AXLE HOUSING AT DRIVE SHAFT TUNNEL 		002
----- LOCK WASHER
B 10 DIN 127 FOR UNDERPAN, REAR AXLE HOUSING AT DRIVE SHAFT TUNNEL 		002
----- HEX. NUT
M 10 DIN 934-5 S FOR UNDERPAN, REAR AXLE HOUSING AT DRIVE SHAFT TUNNEL 		002
----- A 180 351 12 40  SUPPORT, REAR
FOR UNDERPAN, REAR AXLE HOUSING UP TO CHASSIS 8503452 		001
22 A 180 351 15 40  SUPPORT, REAR
FOR UNDERPAN, REAR AXLE HOUSING FROM CHASSIS 8503453 		001
----- HEX. -HD. SCREW
M 10X20 DIN 933-8 G FOR UNDERPAN, REAR AXLE HOUSING AT SUPPORT, REAR 		001
----- LOCK WASHER
B 10 DIN 127 FOR UNDERPAN, REAR AXLE HOUSING AT SUPPORT, REAR 		001
----- HEX. NUT
M 10 DIN 934-5 S FOR UNDERPAN, REAR AXLE HOUSING AT SUPPORT, REAR 		001
31 A 120 350 04 83  UNDERPAN
FOR THRUST ARM SUSPENSION AT BODY FLOOR 		002
----- HEX. -HD.
SHEET METAL SCREW B 6,3X13 DIN 7976 FOR UNDERPAN AT BODY FLOOR 		004
----- SPRING WASHER
B 6 DIN 137 FOR UNDERPAN AT BODY FLOOR 		004
35 A 180 476 04 46  PROTECTIVE RAIL, FRONT
FOR FUEL PIPE AND BRAKE PIPE SEE ALSO GROUP 47 		001
----- A 180 476 08 46  PROTECTIVE RAIL, CENTER
FOR FUEL PIPE AND BRAKE PIPE

Replaced by: A 120 476 08 46
35a A 120 476 08 46  PROTECTIVE RAIL, CENTER
FOR FUEL PIPE AND BRAKE PIPE 		001
35b A 180 470 01 48  PROTECTIVE RAIL, REAR
FOR FUEL PIPE AND BRAKE PIPE 		001
----- LOCK WASHER
B 5 DIN 137 FOR PROTECTIVE RAIL AT BODY FLOOR 		016
----- LENS-HD. SHEET
METAL SCREW B 4, 2X9, 5 DIN 7981 FOR PROTECTIVE RAIL AT BODY FLOOR 		016
DRAW HOOK-EXPORT, SPECIAL REQUEST
45 A 136 310 00 08  DRAW HOOK, REAR 002
46 A 000 997 41 82  RUBBER HOSE, 27 MM LONG
ORDER BY THE METER 		002
----- A 120 310 02 63  BASE, REAR
FOR DRAW HOOK, REAR WELDED DESIGN 		002
----- A 120 310 01 57  STIFFENING ANGLE, LEFT
FOR DRAW HOOK, REAR WELDED DESIGN 		001
----- A 120 310 02 57  STIFFENING ANGLE, RIGHT
FOR DRAW HOOK, REAR WELDED DESIGN 		001
49 A 120 310 03 63  BASE, REAR, LEFT
FOR DRAW HOOK, REAR SCREWED DESIGN 		001
50 A 120 310 04 63  BASE, REAR, RIGHT
FOR DRAW HOOK, REAR SCREWED DESIGN 		001
51 A 120 315 04 04  STRUT
FOR BASE AT BODY FLOOR SCREWED DESIGN 		002
----- HEX. -HD. SCREW
M 10X22 DIN 933-8 G FOR STRUT AT BODY FLOOR SCREWED DESIGN 		002
----- LOCK WASHER
B 10 DIN 127 FOR STRUT AT BODY FLOOR SCREWED DESIGN 		002
----- HEX. -HD. SCREW
M 10X25 DIN 933-8 G FOR BASE AT BODY FLOOR OR DRAW HOOK, REAR RESP. WELDED DESIGN 		004
----- LOCK WASHER
B 10 DIN 127 FOR BASE AT BODY FLOOR OR DRAW HOOK, REAR RESP. WELDED DESIGN 		004
----- HEX. -HD. SCREW
M 10X22 DIN 933-8 G FOR DRAW HOOK AT BASE, REAR SCREWED DESIGN 		002
----- HEX. -HD. SCREW
10X28 DIN 931-8 G FOR DRAW HOOK AT BASE, REAR SCREWED DESIGN 		002
----- LOCK WASHER
B 10 DIN 127 FOR DRAW HOOK AT BASE, REAR SCREWED DESIGN 		004
----- HEX. NUT
M 10 DIN 934-5 S FOR DRAW HOOK AT BASE, REAR SCREWED DESIGN 		004