REAR AXLE [Car] MERCEDES [EUROPA] [CHASSIS]TYP 180


REAR AXLE [Car] MERCEDES [EUROPA] [CHASSIS]TYP 1804041202119181623929303132333373836411091161514812976105162223171328272625352434

REAR AXLE [Car] MERCEDES [EUROPA] [CHASSIS]TYP 1801081071061201191181171161151146059575658827372747576545553646562616647991001331321361351211321341221231244668696749708148718212612712812912598979610110445787711311211110911010595949089102919293851039089878688888687137138140
Item no. Part number Designation/description Quant information
REAR AXLE
----- A 121 350 10 00  REAR AXLE,
COMPLETE RATIO 1:3.7 WITH RIGHT-HAND DRIVE THE BUILT-IN COMPENSATING LEVER FOR HAND BRAKE HAS TO BE EXCHANGED WITH 120 4

[001]
UP TO CHASSIS 024676
 001
1 A 120 350 64 00  REAR AXLE,
COMPLETE RATIO 1:3.9 WITH RIGHT-HAND DRIVE THE BUILT-IN COMPENSATING LEVER FOR HAND BRAKE HAS TO BE EXCHANGED WITH 120 4

[002]
AS OF CHASSIS 024677
 001
----- A 121 350 12 00  REAR AXLE,
COMPLETE RATIO 1:4.1 WITH RIGHT-HAND DRIVE THE BUILT-IN COMPENSATING LEVER FOR HAND BRAKE HAS TO BE EXCHANGED WITH 120 4

Replaced by: A 121 350 17 00
----- A 121 350 17 00  REAR AXLE,
COMPLETE RATIO 1:4.1 WITH RIGHT-HAND DRIVE THE BUILT-IN COMPENSATING LEVER FOR HAND BRAKE HAS TO BE EXCHANGED WITH 120 4

[003]
SPECIAL REQUEST, UP TO CHASSIS 024676
 001
----- A 120 350 14 20  REAR AXLE
HOUSING RATIO 1:3.7 WITH DIFFERENTIAL GEAR AND LEFT REAR AXLE TUBE, WITHOUT SLIDING JOINT, RIGHT REAR AXLE TUBE AND REAR

[001]
UP TO CHASSIS 024676
 001
----- A 105 350 01 00  REAR AXLE
HOUSING RATIO 1:3.9 WITH DIFFERENTIAL GEAR AND LEFT REAR AXLE TUBE, WITHOUT SLIDING JOINT, RIGHT REAR AXLE TUBE AND REAR

[002]
AS OF CHASSIS 024677
 001
REAR AXLE HOUSING
2 A 180 350 01 20  REAR AXLE HOUSING 001
3 A 186 997 00 32  SCREW PLUG
FOR OIL DRAIN AND OIL FILLING IN 		002
DIFFERENTIAL GEAR
----- A 121 350 01 23  DIFFERENTIAL GEAR
RATIO 1:3.7

[001]
UP TO CHASSIS 024676
 001
4 A 120 350 13 23  DIFFERENTIAL GEAR
RATIO 1:3.9

[002]
AS OF CHASSIS 024677
 001
----- A 180 350 05 23  DIFFERENTIAL GEAR
RATIO 1:4.1

[003]
SPECIAL REQUEST, UP TO CHASSIS 024676
 001
----- A 180 353 05 01  REPLACED BY
110 353 01 01 TOGETHER WITH 1 BEARING RING 110 353 00 48

[012]
SIMPLIFICATION OF SPARE PART SYSTEM
5 A 110 353 01 01  DIFFERENTIAL GEAR HOUSING 001
----- A 110 353 00 48  BEARING RING
FOR DIFFERENTIAL CASE 110 353 01 01 		001
6 A 180 353 10 62  GUARD PLATE, 1.3 MM THICK
OPTIONAL 		002
----- A 180 353 11 62  GUARD PLATE, 1.4 MM THICK
OPTIONAL 		002
----- A 180 353 12 62  GUARD PLATE, 1.5 MM THICK
OPTIONAL 		002
----- A 180 353 13 62  GUARD PLATE, 1.6 MM THICK
OPTIONAL 		002
----- A 180 353 14 62  GUARD PLATE, 1.7 MM THICK
OPTIONAL 		002
7 A 180 353 08 15  REAR AXLE
SIDE GEAR, LEFT, 16 TEETH

[006]
UP TO REAR AXLE 9536210 AS OF REAR AXLE 9542731 FURTHERMORE INSTALLED IN 9536212, 9536213, 9536215 TO 9536218, 9536223, 9536224, 9536226, 9536227, 9537217 TO 9542480
 001
----- A 128 353 00 15  REAR AXLE
SIDE GEAR, 16 TEETH

[007]
AS OF REAR AXLE 9536211 UP TO REAR AXLE 9542730 WITH THE EXCEPTION OF 9536212, 9536213, 9536215 TO 9536218, 9536223, 9536224, 9536226, 9536227, 9537217 TO 9542480
 001
----- A 180 353 10 15  REAR AXLE
SIDE GEAR, LEFT, 16 TEETH, HUB 36.3-MM DIA. REPAIR VERSION

[005]
NO LONGER AVAILABLE
8 A 180 350 03 40  REAR AXLE
SIDE GEAR, RIGHT, 16 TEETH

[006]
UP TO REAR AXLE 9536210 AS OF REAR AXLE 9542731 FURTHERMORE INSTALLED IN 9536212, 9536213, 9536215 TO 9536218, 9536223, 9536224, 9536226, 9536227, 9537217 TO 9542480
 001
----- A 128 350 00 40  REAR AXLE
SIDE GEAR, 16 TEETH

[007]
AS OF REAR AXLE 9536211 UP TO REAR AXLE 9542730 WITH THE EXCEPTION OF 9536212, 9536213, 9536215 TO 9536218, 9536223, 9536224, 9536226, 9536227, 9537217 TO 9542480
 001
----- A 180 350 05 40  REAR AXLE
SIDE GEAR, RIGHT, 16 TEETH, HUB 36.3-MM DIA. REPAIR VERSION

[005]
NO LONGER AVAILABLE
9 A 180 353 00 14  SPIDER GEAR, 10 TEETH 002
10 A 180 353 00 24  SPHERICAL WASHER 002
11 A 180 353 00 21  DIFFERENTIAL PIN 001
12 A 136 353 02 74  LOCK PIN
FOR DIFFERENTIAL PIN 		001
----- A 121 350 00 39  DRIVE PINION
WITH RING GEAR RATIO 1:3.7

[001]
UP TO CHASSIS 024676
 001
13 A 120 350 13 39  DRIVE PINION
WITH RING GEAR, RATIO 1:3.9

[002]
AS OF CHASSIS 024677
 001
----- A 180 350 02 39  DRIVE PINION
WITH RING GEAR, RATIO 1:4.1

[003]
SPECIAL REQUEST, UP TO CHASSIS 024676
 001
14 A 120 994 00 10  LOCKING PLATE
RING GEAR AT DIFFERENTIAL GEAR HOUSING 		008
15 A 183 990 01 01  HEX. HEAD SCREW
RING GEAR AT DIFFERENTIAL GEAR HOUSING 		008
16 A 000 981 14 05  TAPERED ROLLER BEARING
DIFFERENTIAL GEAR TO REAR AXLE HOUSING 		002
17 A 180 353 08 25  THREADED RING
FOR REAR AXLE HOUSING FLANGE DIFFERENTIAL GEAR TO REAR AXLE HOUSING 		001
18 A 180 353 06 25  THREADED RING
FOR REAR AXLE HOUSING DIFFERENTIAL GEAR TO REAR AXLE HOUSING 		001
19 A 180 353 01 73  LOCK
OPTIONAL DIFFERENTIAL GEAR TO REAR AXLE HOUSING 		001
----- A 180 353 02 73  LOCK
OPTIONAL DIFFERENTIAL GEAR TO REAR AXLE HOUSING 		001
----- A 180 353 03 73  LOCK
OPTIONAL DIFFERENTIAL GEAR TO REAR AXLE HOUSING 		001
----- A 180 353 05 73  LOCK
OPTIONAL DIFFERENTIAL GEAR TO REAR AXLE HOUSING 		001
----- A 180 353 06 73  LOCK
OPTIONAL DIFFERENTIAL GEAR TO REAR AXLE HOUSING 		001
20 N 000933 006015  HEX. HEAD
SCREW M 6X12 DIN 933-8 G DIFFERENTIAL GEAR TO REAR AXLE HOUSING 		002
21 A 180 994 00 30  LOCK PLATE
DIFFERENTIAL GEAR TO REAR AXLE HOUSING 		001
22 A 180 990 02 15  LOCK SCREW
THREADED RING TO REAR AXLE TUBE, LEFT 		001
23 A 180 994 01 10  LOCK PLATE
THREADED RING TO REAR AXLE TUBE, LEFT 		001
24 A 000 981 16 01  CYLINDER ROLLER BEARING 001
25 A 180 353 00 40  SPACER SLEEVE 001
26 A 180 353 01 48  PRESSURE RING 001
27 A 000 981 04 27  INCLINED BALL BEARING 001
28 A 180 353 00 63  SHOULDER RING 001
29 A 180 353 03 08  COVER
FOR REAR AXLE HOUSING, FRONT 		001
30 A 000 997 13 46  SEAL RING
FOR REAR AXLE HOUSING, FRONT 		001
31 A 180 350 01 45  JOINT FLANGE
FOR DRIVE PINION 		001
32 A 120 350 00 66  GROOVED NUT
FOR DRIVE PINION 		001
33 A 120 994 00 44  LOCK 001
34 A 120 994 02 35  SNAP RING, REAR 001
35 N 009045 080000  SNAP RING,
FRONT 80 DIN 9045 		001
36 A 183 351 01 70  ADJUSTING SCREW
FOR PRESSURE RING 		002
37 N 000093 015000  LOCK PLATE 15 DIN 93
FOR ADJUSTING SCREW 		002
38 A 180 990 01 50  HEX. NUT
FOR ADJUSTING SCREW 		002
39 A 120 353 24 52  SHIM, 1.00 MM THICK
OPTIONAL 		001
----- A 120 353 26 52  SHIM, 1.10 MM THICK
OPTIONAL 		001
----- A 120 353 28 52  SHIM, 1.20 MM THICK
OPTIONAL 		001
----- A 120 353 30 52  SHIM, 1.30 MM THICK
OPTIONAL 		001
----- A 120 353 32 52  SHIM, 1.40 MM THICK
OPTIONAL 		001
----- A 120 353 34 52  SHIM, 1.50 MM THICK
OPTIONAL 		001
----- A 120 353 36 52  SHIM, 1.60 MM THICK
OPTIONAL 		001
----- A 120 353 38 52  SHIM, 1.70 MM THICK
OPTIONAL 		001
----- A 120 353 40 52  SHIM, 1.80 MM THICK
OPTIONAL 		001
----- A 120 353 42 52  SHIM, 1.00 MM THICK
OPTIONAL 		001
----- A 120 353 44 52  SHIM, 2.00 MM THICK
OPTIONAL 		001
----- A 120 353 45 52  SHIM, 2.05 MM THICK
OPTIONAL 		001
40 N 000931 007002  HEX. HEAD
SCREW M 7X20 DIN 931-10 K COVER TO REAR AXLE HOUSING 		006
41 N 000127 007200  LOCK WASHER B 7 DIN 127
COVER TO REAR AXLE HOUSING 		006
REAR AXLE TUBE
45 A 180 350 44 19  REAR AXLE
TUBE, LEFT, WITH THRUST ARM SUPPORT AND SCREW PLUG 		001
46 A 180 350 39 19  REAR AXLE
TUBE, RIGHT, WITH THRUST ARM SUPPORT 		001
47 A 180 351 01 50  BUSHING
FOR REAR AXLE TUBE, RIGHT 		002
48 A 186 997 00 32  SCREW PLUG
FOR OIL FILLING IN TO REAR AXLE TUBE, LEFT 		001
----- A 180 350 02 90  BREATHER
FOR REAR AXLE TUBE

Replaced by: A 180 350 04 90
49 A 180 350 04 90  BREATHER
FOR REAR AXLE TUBE 		001
UNIVERSAL JOINT, SLIDING
53 A 180 350 05 13  UNIVERSAL JOINT, SLIDING

[006]
UP TO REAR AXLE 9536210 AS OF REAR AXLE 9542731 FURTHERMORE INSTALLED IN 9536212, 9536213, 9536215 TO 9536218, 9536223, 9536224, 9536226, 9536227, 9537217 TO 9542480
 001
----- A 111 350 00 13  UNIVERSAL JOINT, SLIDING

[007]
AS OF REAR AXLE 9536211 UP TO REAR AXLE 9542730 WITH THE EXCEPTION OF 9536212, 9536213, 9536215 TO 9536218, 9536223, 9536224, 9536226, 9536227, 9537217 TO 9542480
 001
54 A 180 357 01 52  WASHER 001
55 A 000 994 29 41  LOCK RING 001
56 A 180 350 07 13  SLIDING SLEEVE

[006]
UP TO REAR AXLE 9536210 AS OF REAR AXLE 9542731 FURTHERMORE INSTALLED IN 9536212, 9536213, 9536215 TO 9536218, 9536223, 9536224, 9536226, 9536227, 9537217 TO 9542480
 001
----- A 111 350 01 13  SLIDING SLEEVE

[007]
AS OF REAR AXLE 9536211 UP TO REAR AXLE 9542730 WITH THE EXCEPTION OF 9536212, 9536213, 9536215 TO 9536218, 9536223, 9536224, 9536226, 9536227, 9537217 TO 9542480
 001
57 N 000471 032000  LOCK RING 32X1,5 DIN 471 002
58 A 180 981 00 86  CYLINDER ROLLER 132
59 A 188 357 00 52  WASHER 001
60 N 000472 048000  LOCK RING 48X1,75 DIN 472 001
----- A 180 357 00 13 

Replaced by: A 111 350 00 28
----- A 120 357 01 14 

Replaced by: A 111 350 00 28
----- UNIVERSAL JOINT
CROSS WITH NEEDLES AND BEARING BUSHINGS 2,5X11,8 II DIN 5402

Replaced by: A 111 350 00 28
61 A 111 350 00 28  UNIVERSAL JOINT
CROSS WITH NEEDLES AND BEARING BUSHINGS 		001
62 A 120 994 01 35  SNAP RING, 2.25 MM THICK
OPTIONAL 		004
----- A 120 994 04 35  SNAP RING, 2.35 MM THICK
OPTIONAL 		004
----- A 120 994 06 35  SNAP RING, 2.40 MM THICK
OPTIONAL 		004
----- A 120 994 07 35  SNAP RING, 2.45 MM THICK
OPTIONAL 		004
----- A 120 994 08 35  SNAP RING, 2.55 MM THICK
OPTIONAL 		004
----- A 180 353 00 76  TIGHTENING SCREW

Replaced by: A 111 353 00 76
64 A 111 353 00 76  TIGHTENING SCREW 001
65 N 000127 010200  LOCK WASHER B 10 DIN 127 001
66 A 180 353 30 52  SHIM, 1.00 MM THICK
OPTIONAL 		001
----- A 180 353 31 52  SHIM, 1.10 MM THICK
OPTIONAL 		001
----- A 180 353 33 52  SHIM, 1.20 MM THICK
OPTIONAL 		001
----- A 180 353 35 52  SHIM, 1.30 MM THICK
OPTIONAL 		001
----- A 180 353 37 52  SHIM, 1.40 MM THICK
OPTIONAL 		001
----- A 180 353 39 52  SHIM, 1.50 MM THICK
OPTIONAL 		001
----- A 180 353 41 52  SHIM, 1.60 MM THICK
OPTIONAL 		001
----- A 180 353 43 52  SHIM, 1.70 MM THICK
OPTIONAL 		001
----- A 180 353 45 52  SHIM, 1.80 MM THICK
OPTIONAL 		001
----- A 180 353 47 52  SHIM, 1.90 MM THICK
OPTIONAL 		001
----- A 180 353 49 52  SHIM, 2.00 MM THICK
OPTIONAL 		001
----- A 180 357 05 91  RUBBER SLEEVE

Replaced by: A 110 357 01 91
67 A 110 357 01 91  RUBBER SLEEVE 001
68 A 110 357 03 91  RUBBER SLEEVE, SPLIT
FOR REPAIRS 		001
69 A 002 988 10 78  CLIP
FOR REPAIRS 		009
REAR AXLE SHAFT
----- A 180 350 13 10  REAR AXLE SHAFT, LEFT

Replaced by: A 180 350 26 10
70 A 180 350 26 10  REAR AXLE SHAFT, LEFT

[006]
UP TO REAR AXLE 9536210 AS OF REAR AXLE 9542731 FURTHERMORE INSTALLED IN 9536212, 9536213, 9536215 TO 9536218, 9536223, 9536224, 9536226, 9536227, 9537217 TO 9542480
 001
----- A 110 350 07 10  REAR AXLE SHAFT, LEFT

[007]
AS OF REAR AXLE 9536211 UP TO REAR AXLE 9542730 WITH THE EXCEPTION OF 9536212, 9536213, 9536215 TO 9536218, 9536223, 9536224, 9536226, 9536227, 9537217 TO 9542480
 001
71 A 120 401 01 71  WHEEL MOUNTING PIN 005
----- A 180 350 14 10  REAR AXLE SHAFT, RIGHT

Replaced by: A 180 350 27 10
72 A 180 350 27 10  REAR AXLE SHAFT, RIGHT

[006]
UP TO REAR AXLE 9536210 AS OF REAR AXLE 9542731 FURTHERMORE INSTALLED IN 9536212, 9536213, 9536215 TO 9536218, 9536223, 9536224, 9536226, 9536227, 9537217 TO 9542480
 001
----- A 110 350 08 10  REAR AXLE SHAFT, RIGHT

[007]
AS OF REAR AXLE 9536211 UP TO REAR AXLE 9542730 WITH THE EXCEPTION OF 9536212, 9536213, 9536215 TO 9536218, 9536223, 9536224, 9536226, 9536227, 9537217 TO 9542480
 001
73 A 120 401 01 71  WHEEL MOUNTING PIN 005
74 A 183 981 00 25  GROOVED BALL BEARING
FOR REAR AXLE SHAFT 		002
75 A 183 353 03 73  LOCK PLATE
FOR REAR AXLE SHAFT 		002
76 A 153 357 00 26  GROOVED NUT
FOR REAR AXLE SHAFT 		002
77 N 000933 010026  HEX. HEAD
SCREW M 10X22 DIN 933-8 G REAR AXLE TUBE TO REAR AXLE HOUSING 		004
78 N 000933 007006  HEX. HEAD
SCREW M 7X22 DIN 933-8 G REAR AXLE TUBE TO REAR AXLE HOUSING 		004
----- N 900262 009000  HOSE CLAMP S 9 N 262
RUBBER SLEEVE TO REAR AXLE TUBE AND REAR AXLE HOUSING 		002
----- N 900263 009000  HOSE STRAP
(ORDER BY THE METER) RUBBER SLEEVE TO REAR AXLE TUBE AND REAR AXLE HOUSING 		002
81 A 120 421 06 01  BRAKE DRUM 002
82 A 110 990 00 59  SPHERICAL COLLAR NUT
FOR BRAKE DRUM TO WHEEL PIN, REAR AXLE SHAFT 		004
REAR AXLE SUSPENSION
85 A 180 351 06 74  CONNECTION PIN 001
86 A 180 351 01 53  SLEEVE, 26.0 MM LONG
OPTIONAL 		002
----- A 180 351 18 53  SLEEVE, 25.8 MM LONG
OPTIONAL 		002
----- A 180 351 17 53  SLEEVE, 25.6 MM LONG
OPTIONAL 		002
----- A 180 351 16 53  SLEEVE, 25.4 MM LONG
OPTIONAL 		002
----- A 180 351 15 53  SLEEVE, 25.2 MM LONG
OPTIONAL 		002
----- A 180 351 14 53  SLEEVE, 25.0 MM LONG
OPTIONAL 		002
87 A 180 351 14 52  SHIM, 2.0 MM THICK 002
88 A 180 351 13 52  SHIM, 1.9 MM THICK
OPTIONAL 		002
----- A 180 351 14 52  SHIM, 2.0 MM THICK
OPTIONAL 		002
----- A 180 351 15 52  SHIM, 2.1 MM THICK
OPTIONAL 		002
----- A 180 351 16 52  SHIM, 2.2 MM THICK
OPTIONAL 		002
----- A 180 351 17 52  SHIM, 2.3 MM THICK
OPTIONAL 		002
----- A 180 351 18 52  SHIM, 2.4 MM THICK
OPTIONAL 		002
----- A 180 351 19 52  SHIM, 2.5 MM THICK
OPTIONAL 		002
----- A 180 351 27 52  SHIM, 2.6 MM THICK
OPTIONAL 		002
----- A 180 351 28 52  SHIM, 2.7 MM THICK
OPTIONAL 		002
----- A 180 351 29 52  SHIM, 2.8 MM THICK
OPTIONAL 		002
----- A 180 351 30 52  SHIM, 2.9 MM THICK
OPTIONAL 		002
----- A 180 351 20 52  SHIM, 3.0 MM THICK
OPTIONAL 		002
----- A 180 351 31 52  SHIM, 3.1 MM THICK
OPTIONAL 		002
----- A 180 351 32 52  SHIM, 3.2 MM THICK
OPTIONAL 		002
89 A 180 351 03 51  SHIM 002
90 A 180 351 09 86  RUBBER RING 004
91 A 180 351 00 74  WEDGE
CONNECTION PIN TO REAR AXLE HOUSING 		001
92 N 000127 008200  LOCK WASHER B 8 DIN 127
CONNECTION PIN TO REAR AXLE HOUSING 		001
93 N 000934 008000  HEX. NUT M 8 DIN 934-5 S
CONNECTION PIN TO REAR AXLE HOUSING 		001
94 A 180 994 03 41  LOCK RING
AT CONNECTION PIN 		001
95 N 000443 020000  COVER 20 DIN 443
AT CONNECTION PIN 		001
96 A 180 351 11 53  SPACER SLEEVE
FOR CONNECTION PIN, FRONT 		001
97 A 180 994 01 12  LOCK PLATE
CONNECTION PIN TO SILENT BLOCK IN SUPPORT 		001
98 A 180 997 04 30  HEX. HEAD SCREW
CONNECTION PIN TO SILENT BLOCK IN SUPPORT 		001
99 N 071412 006100  GREASE FITTING
A 6 DIN 71412 TO REAR EYE 		001
100 N 071412 006200  GREASE FITTING
B 6 DIN 71 412 HIGH = 20.5 MM TO FRONT EYE 		001
101 A 111 350 02 75  RUBBER MOUNTING
IN SUPPORT, REAR AXLE SUSPENSION 		001
102 A 180 350 09 32  SUPPORT WITH RETAINER
FOR REAR AXLE SUSPENSION 		001
103 N 070613 010000  HEX. HEAD
SCREW M 10X35 DIN 70 613-8 G RUBBER MOUNTING IN SUPPORT 		002
104 N 000127 010200  LOCK WASHER B 10 DIN 127
RUBBER MOUNTING IN SUPPORT 		002
105 A 180 350 00 29  THRUST ARM, LEFT
FOR REAR AXLE 		001
106 A 180 350 01 29  THRUST ARM, RIGHT
FOR REAR AXLE 		001
107 A 120 990 09 20  CYLINDER SCREW
FOR MOUNTING SHOCK ABSORBER 		004
108 A 120 990 10 20  CYLINDER SCREW
FOR MOUNTING SHOCK ABSORBER 		004
109 A 120 352 07 65  RUBBER MOUNTING
THRUST ARM TO REAR AXLE TUBE 		002
110 A 120 352 05 76  TIGHTENING PLATE
THRUST ARM TO REAR AXLE TUBE 		002
111 A 120 352 06 76  TIGHTENING PLATE
THRUST ARM TO REAR AXLE TUBE 		002
112 A 120 994 04 12  LOCK PLATE
THRUST ARM TO REAR AXLE TUBE 		002
113 A 120 990 00 01  HEX. HEAD SCREW
THRUST ARM TO REAR AXLE TUBE 		002
114 A 180 351 05 86  RUBBER RING
BOTTOM REAR AXLE SUSPENSION, BOTTOM, TO BODY FLOOR

[001]
UP TO CHASSIS 024676
 001
115 A 121 351 02 48  RUBBER RING
BOTTOM REAR AXLE SUSPENSION, BOTTOM, TO BODY FLOOR

[002]
AS OF CHASSIS 024677
 001
116 A 121 351 02 86  RUBBER RING
REAR AXLE SUSPENSION, BOTTOM, TO BODY FLOOR

[002]
AS OF CHASSIS 024677
 001
----- A 180 351 10 86  RUBBER MOUNTING
TOP REAR AXLE SUSPENSION, BOTTOM, TO BODY FLOOR 		001
118 A 128 350 00 67  TIGHTENING WASHER
REAR AXLE SUSPENSION, BOTTOM, TO BODY FLOOR 		001
119 A 180 351 03 73  LOCK PLATE
REAR AXLE SUSPENSION, BOTTOM, TO BODY FLOOR 		001
120 N 000936 022000  HEX. NUT
M 22X1,5 DIN 936-5 S REAR AXLE SUSPENSION, BOTTOM, TO BODY FLOOR 		001
----- A 180 351 01 96  REPLACED BY
180 350 01 93 TOGETHER WITH 1 SHACKLE 111 351 02 40 1 SHACKLE 111 351 03 40 1 HEX. NUT M 14X1,5 DIN 934-5 S 1 HEX. HEAD

[008]
UP TO CHASSIS 028441
----- A 180 351 01 96  REPLACED BY
180 350 01 93 TOGETHER WITH 1 SHACKLE 111 351 02 40 1 SHACKLE 111 351 03 40 1 HEX. NUT M 14X1,5 DIN 934-5 S 1 HEX. HEAD

[010]
UP TO CHASSIS 024017
121 A 180 350 01 93  CROSS STRUT

[011]
AS OF CHASSIS 024018
 001
----- N 000934 012004  HEX. NUT
M 12X1,5 DIN 934-5 S

[010]
UP TO CHASSIS 024017
 001
122 N 000934 014003  HEX. NUT
M 14X1,5 DIN 934-5 S

[011]
AS OF CHASSIS 024018
 001
----- A 180 351 05 40  REPLACED BY
111 351 03 40 TOGETHER WITH 1 SHACKLE 111 351 02 40 1 CROSS STRUT 180 350 01 93 1 HEX. NUT M 14X1,5 DIN 934-5 S 1 HEX. H

[008]
UP TO CHASSIS 028441
----- A 180 351 05 40  REPLACED BY
111 351 03 40 TOGETHER WITH 1 SHACKLE 111 351 02 40 1 CROSS STRUT 180 350 01 93 1 HEX. NUT M 14X1,5 DIN 934-5 S 1 HEX. H

[010]
UP TO CHASSIS 024017
----- A 180 351 14 40  REPLACED BY
111 351 03 40 TOGETHER WITH 1 SHACKLE 111 351 02 40 1 CROSS STRUT 180 350 01 93 1 HEX. NUT M 14X1,5 DIN 934-5 S 1 HEX. H

[008]
UP TO CHASSIS 028441
----- A 180 351 14 40  REPLACED BY
111 351 03 40 TOGETHER WITH 1 SHACKLE 111 351 02 40 1 CROSS STRUT 180 350 01 93 1 HEX. NUT M 14X1,5 DIN 934-5 S 1 HEX. H

[010]
UP TO CHASSIS 024017
123 A 111 351 03 40  SHACKLE

[011]
AS OF CHASSIS 024018
 001
124 A 180 351 00 48  RUBBER MOUNTING 001
----- A 180 351 04 40  REPLACED BY
111 351 02 40 TOGETHER WITH 1 SHACKLE 111 351 03 40 1 CROSS STRUT 180 350 01 93 1 HEX. NUT M 12X1,5 DIN 934-5 S 1 HEX. H

[008]
UP TO CHASSIS 028441
----- A 180 351 04 40  REPLACED BY
111 351 02 40 TOGETHER WITH 1 SHACKLE 111 351 03 40 1 CROSS STRUT 180 350 01 93 1 HEX. NUT M 12X1,5 DIN 934-5 S 1 HEX. H

[010]
UP TO CHASSIS 024017
----- A 180 351 13 40  REPLACED BY
111 351 02 40 TOGETHER WITH 1 SHACKLE 111 351 03 40 1 CROSS STRUT 180 350 01 93 1 HEX. NUT M 12X1,5 DIN 934-5 S 1 HEX. H

[008]
UP TO CHASSIS 028441
----- A 180 351 13 40  REPLACED BY
111 351 02 40 TOGETHER WITH 1 SHACKLE 111 351 03 40 1 CROSS STRUT 180 350 01 93 1 HEX. NUT M 12X1,5 DIN 934-5 S 1 HEX. H

[010]
UP TO CHASSIS 024017
125 A 111 351 02 40  SHACKLE

[011]
AS OF CHASSIS 024018
 001
----- N 000961 012011  HEX. HEAD
SCREW M 12X1,5X25 DIN 961-8 G

[010]
UP TO CHASSIS 024017
 001
126 N 000933 010011  HEX. HEAD
SCREW M 10X18 DIN 933-8 G

[011]
AS OF CHASSIS 024018
 001
----- N 000127 012200  LOCK WASHER B 12 DIN 127

[010]
UP TO CHASSIS 024017
 001
127 N 000137 010200  SPRING WASHER

[011]
AS OF CHASSIS 024018
 001
----- N 000960 012015  HEX. HEAD
SCREW M 12X1,5X35 DIN 960-8 G

[010]
UP TO CHASSIS 024017
 001
128 N 000960 012005  HEX. HEAD
SCREW M 12X1,5X30 DIN 960-8 G

[011]
AS OF CHASSIS 024018
 001
----- N 000127 012200  LOCK WASHER B 12 DIN 127

[010]
UP TO CHASSIS 024017
 001
129 N 000137 012200  SPRING WASHER

[011]
AS OF CHASSIS 024018
 001
----- A 180 351 00 76  WASHER

[010]
UP TO CHASSIS 024017
 001
----- A 180 351 06 53  SPACER TUBE

[011]
AS OF CHASSIS 024018
 001
132 A 180 351 07 44  RUBBER BUFFER
CROSS STRUT TO BODY FLOOR 		002
133 A 180 351 03 43  CUP
FOR RUBBER BUFFER CROSS STRUT TO BODY FLOOR

[010]
UP TO CHASSIS 024017
 002
133 A 180 351 03 43  CUP
FOR RUBBER BUFFER CROSS STRUT TO BODY FLOOR

[011]
AS OF CHASSIS 024018
 001
134 A 180 351 04 43  CUP
FOR RUBBER BUFFER CROSS STRUT TO BODY FLOOR

[011]
AS OF CHASSIS 024018
 001
----- N 000127 012200  LOCK WASHER B 12 DIN 127
CROSS STRUT TO BODY FLOOR

[010]
UP TO CHASSIS 024017
 001
135 N 000934 012004  HEX. NUT
M 12X1,5 DIN 934-5 S CROSS STRUT TO BODY FLOOR 		001
136 N 007967 012000  LOCK NUT
M 12X1,5 DIN 7967 CROSS STRUT TO BODY FLOOR

[011]
AS OF CHASSIS 024018
 001
137 A 111 352 00 65  RUBBER MOUNTING
THRUST ARM TO BODY FLOOR 		002
----- A 180 352 01 67  RETAINER
THRUST ARM TO BODY FLOOR

Replaced by: A 110 352 00 67
138 A 110 352 00 67  RETAINER
FOR RUBBER MOUNTING THRUST ARM TO BODY FLOOR 		002
140 A 180 352 03 72  CASTLE COLLAR NUT
THRUST ARM TO BODY FLOOR 		002
----- N 000094 003005  COTTER PIN 3X28 DIN 94
THRUST ARM TO BODY FLOOR 		002