REAR AXLE HOUSING WITH DIFFERENTIAL [Car] MERCEDES [EUROPA] [CHASSIS]S-KLASSE


REAR AXLE HOUSING WITH DIFFERENTIAL [Car] MERCEDES [EUROPA] [CHASSIS]S-KLASSE58015516090727667747887828613151514019013723021020022025024015015514570

REAR AXLE HOUSING WITH DIFFERENTIAL [Car] MERCEDES [EUROPA] [CHASSIS]S-KLASSE120454040105100252555205011711511011035359530306012512413284
Item no. Part number Designation/description Quant information
5 A 220 350 21 14  HOUSING
REAR AXLE CENTER ASSEMBLY WITH FLANGE I = 3.07

Ident. end no.
[002]To Chassis: A 280977 => To Date: 30/09/2002

[697]
PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
 001
5 A 220 350 21 14  HOUSING
REAR AXLE CENTER ASSEMBLY WITH FLANGE I = 3.07

Ident. end no.
[003]From Chassis: A 280978 => From Date: 30/09/2002
[004]To Chassis: A 322760 => To Date: 05/10/2002

[005]
ATTN.: FROM IDENT.: A 280978 TO IDENT.: A 322760 MIXED INSTALL.POSS.
PAY ATTEN. TO REMOVED AXLE SHAFT; NOT VALID FOR INSERTED.......AX. SHFT
[697]
PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
 001
5 A 220 350 82 14  AXLE HOUSING
REAR AXLE CENTER ASSEMBLY W/O FLANGE I = 3.07

Ident. end no.
[003]From Chassis: A 280978 => From Date: 30/09/2002
[010]To Chassis: A 322760 => To Date: 02/10/2002

[006]
CAUTION FROM IDENT: A 280978 TO IDENT: A 322760 MIXED INST. POSSIBLE
NOTE REMOVED AXLE SHAFT, NOT VALID FOR BOLT-ON AXLE SHAFT
[697]
PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
 001
5 A 220 350 82 14  AXLE HOUSING
REAR AXLE CENTER ASSEMBLY W/O FLANGE I = 3.07

Ident. end no.
[007]From Chassis: A 322761 => From Date: 05/10/2002

[697]
PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
 001
13 A 210 351 08 05  HOUSING 001
15 A 352 997 00 32  SCREW PLUG
REAR AXLE HOUSING WITH DIFFERENTIAL 		002
20 A 129 350 20 23  DIFFERENTIAL GEAR
LESS RING GEAR AND PINION

[402]
NO LONGER AVAILABLE
 001
25 A 115 353 12 62  PRESSURE PLATE
AS REQUIRED 1.25 MM 		002
25 A 115 353 11 62  PRESSURE PLATE
AS REQUIRED 1.30 MM 		002
25 A 115 353 16 62  PRESSURE PLATE
AS REQUIRED 1.35 MM 		002
25 A 115 353 10 62  PRESSURE PLATE
AS REQUIRED 1.40 MM 		002
25 A 115 353 17 62  PRESSURE PLATE
AS REQUIRED 1.45 MM 		002
25 A 115 353 09 62  PRESSURE PLATE
AS REQUIRED 1.50 MM 		002
25 A 115 353 18 62  PRESSURE PLATE
AS REQUIRED 1.55 MM 		002
25 A 115 353 08 62  PRESSURE PLATE
AS REQUIRED 1.60 MM 		002
25 A 115 353 19 62  PRESSURE PLATE
AS REQUIRED 1.65 MM 		002
30 A 210 353 05 15  SIDE GEAR 002
35 A 210 353 01 14  DIFFERENTIAL PINION 002
40 A 210 353 02 24  SPHERICAL WASHER 002
45 A 210 353 02 21  PIN 001
50 N 001481 006017  ROLL PIN 001
55 A 210 350 43 39  GEAR SET 1:3.07

Replaced by: A 210 350 53 39

[013]
FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.

Ident. end no.
[011]To Chassis: A 468222 => To Date: 04/02/2005
 001
55 A 210 350 53 39  GEAR SET 1:3.07 001
60 A 003 990 54 12  BOLT
RING GEAR TO DIFFERENTIAL CASE M10X1 		010
67 A 210 980 00 02  TAPERED ROLLER BEARING
RING GEAR BEARING 		002
70 A 220 994 01 41  FUSE
AS REQUIRED 3.60 MM 		002
70 A 220 994 02 41  FUSE
AS REQUIRED 3.70 MM 		002
70 A 220 994 03 41  FUSE
AS REQUIRED 3.80 MM 		002
70 A 220 994 04 41  FUSE
AS REQUIRED 3.85 MM 		002
70 A 220 994 05 41  FUSE
AS REQUIRED 3.90 MM 		002
70 A 220 994 06 41  FUSE
AS REQUIRED 3.95 MM 		002
70 A 220 994 07 41  FUSE
AS REQUIRED 4.00 MM 		002
70 A 220 994 08 41  FUSE
AS REQUIRED 4.05 MM 		002
70 A 220 994 09 41  FUSE
AS REQUIRED 4.10 MM 		002
70 A 220 994 10 41  FUSE
AS REQUIRED 4.15 MM 		002
70 A 220 994 11 41  FUSE
AS REQUIRED 4.20 MM 		002
70 A 220 994 12 41  FUSE
AS REQUIRED 4.30 MM 		002
70 A 220 994 13 41  FUSE
AS REQUIRED 4.40 MM 		002
70 A 220 994 14 41  FUSE
AS REQUIRED 4.45 MM 		002
70 A 220 994 15 41  FUSE
AS REQUIRED 4.50 MM 		002
80 A 220 357 06 90  PROTECTIVE RING
INTERIOR FLANGE

[014]
IMPORTANT: SEALING RING AND PROTECTIVE RING MUST ALWAYS BE EXCHANGED TOGETHER!
 002
82 A 025 997 26 47  SEAL RING
INTERIOR FLANGE

[014]
IMPORTANT: SEALING RING AND PROTECTIVE RING MUST ALWAYS BE EXCHANGED TOGETHER!
 002
84 A 220 350 29 14  REPAIR KIT
MOUNTING PARTS

[015]
SEPARATE PARTS VALID FOR BOLTED AXLE SHAFTS ONLY
 001
86 A 220 350 25 45  JOINT FLANGE
INSIDE

[015]
SEPARATE PARTS VALID FOR BOLTED AXLE SHAFTS ONLY
 002
90 A 140 994 23 40  SNAP RING
AS REQUIRED 1.40 MM 		002
90 A 140 994 24 40  SNAP RING
AS REQUIRED 1.45 MM 		002
90 A 140 994 25 40  SNAP RING
AS REQUIRED 1.50 MM 		002
90 A 140 994 26 40  SNAP RING
AS REQUIRED 1.55 MM 		002
90 A 140 994 27 40  SNAP RING
AS REQUIRED 1.60 MM 		002
90 A 140 994 28 40  SNAP RING
AS REQUIRED 1.65 MM 		002
90 A 140 994 29 40  SNAP RING
AS REQUIRED 1.70 MM 		002
90 A 140 994 30 40  SNAP RING
AS REQUIRED 1.75 MM 		002
90 A 140 994 31 40  SNAP RING
AS REQUIRED 1.80 MM 		002
90 A 140 994 32 40  SNAP RING
AS REQUIRED 1.85 MM 		002
90 A 140 994 33 40  SNAP RING
AS REQUIRED 1.90 MM 		002
90 A 140 994 34 40  SNAP RING
AS REQUIRED 1.95 MM 		002
90 A 140 994 35 40  SNAP RING
AS REQUIRED 2.00 MM 		002
90 A 140 994 36 40  SNAP RING
AS REQUIRED 2.05 MM 		002
90 A 140 994 37 40  SNAP RING
AS REQUIRED 2.10 MM 		002
90 A 140 994 38 40  SNAP RING
AS REQUIRED 2.15 MM

[402]
NO LONGER AVAILABLE
 002
90 A 140 994 39 40  SNAP RING
AS REQUIRED 2.20 MM 		002
90 A 140 994 40 40  SNAP RING
AS REQUIRED 2.25 MM 		002
90 A 140 994 41 40  SNAP RING
AS REQUIRED 2.30 MM 		002
90 A 140 994 42 40  SNAP RING
AS REQUIRED 2.35 MM 		002
90 A 140 994 43 40  SNAP RING
AS REQUIRED 2.40 MM 		002
90 A 140 994 44 40  SNAP RING
AS REQUIRED 1.30 MM 		002
90 A 140 994 45 40  SNAP RING
AS REQUIRED 1.35 MM

[402]
NO LONGER AVAILABLE
 002
90 A 140 994 68 40  SNAP RING
AS REQUIRED 2.45 MM 		002
90 A 140 994 69 40  SNAP RING
AS REQUIRED 2.50 MM 		002
90 A 140 994 70 40  SNAP RING
AS REQUIRED 2.55 MM 		002
90 A 140 994 71 40  SNAP RING
AS REQUIRED 2.60 MM 		002
90 A 140 994 72 40  SNAP RING
AS REQUIRED 2.65 MM 		002
90 A 140 994 73 40  SNAP RING
AS REQUIRED 2.70 MM 		002
95 A 126 353 01 52  SPACER WASHER
AS REQUIRED 1.50 MM 		001
95 A 126 353 02 52  SPACER WASHER
AS REQUIRED 1.55 MM 		001
95 A 126 353 03 52  SPACER WASHER
AS REQUIRED 1.60 MM 		001
95 A 126 353 04 52  SPACER WASHER
AS REQUIRED 1.65 MM 		001
95 A 126 353 05 52  SPACER WASHER
AS REQUIRED 1.70 MM 		001
95 A 126 353 06 52  SPACER WASHER
AS REQUIRED 1.75 MM 		001
95 A 126 353 07 52  SPACER WASHER
AS REQUIRED 1.80 MM 		001
95 A 126 353 08 52  SPACER WASHER
AS REQUIRED 1.85 MM 		001
95 A 126 353 09 52  SPACER WASHER
AS REQUIRED 1.90 MM 		001
95 A 126 353 10 52  SPACER WASHER
AS REQUIRED 1.95 MM 		001
95 A 126 353 11 52  SPACER WASHER
AS REQUIRED 2.00 MM 		001
95 A 126 353 12 52  SPACER WASHER
AS REQUIRED 2.05 MM 		001
95 A 126 353 13 52  SPACER WASHER
AS REQUIRED 2.10 MM 		001
95 A 126 353 14 52  SPACER WASHER
AS REQUIRED 2.15 MM 		001
95 A 126 353 15 52  SPACER WASHER
AS REQUIRED 2.20 MM 		001
95 A 126 353 16 52  SPACER WASHER
AS REQUIRED 2.25 MM 		001
95 A 126 353 17 52  SPACER WASHER
AS REQUIRED 2.30 MM 		001
95 A 126 353 18 52  SPACER WASHER
AS REQUIRED 2.35 MM 		001
95 A 126 353 19 52  SPACER WASHER
AS REQUIRED 2.40 MM 		001
100 A 000 980 09 02  TAPERED ROLLER BEARING
DRIVE PINION 		001
105 A 126 353 00 42  SPACER BUSHING 001
110 A 126 353 00 62  PRESSURE PLATE 002
115 A 002 980 18 02  TAPERED ROLLER BEARING
DRIVE PINION 		001
120 A 220 350 22 45  JOINT FLANGE
PROPELLER SHAFT 100 MM

[016]
ORDER TOGETHER: 1X 024 997 99 47
 001
125 A 024 997 99 47  SEAL RING
FLANGE 		001
132 A 210 353 05 72  NUT
JOINT FLANGE M29X1.5 		001
137 A 220 350 00 36  END COVER 001
140 N 910143 010000  HEXALOBULAR BOLT
END COVER TO TRANSMISSION CASE M10X45 		004
140 N 910105 010009  HEXAGON HEAD BOLT
END COVER TO TRANSMISSION CASE M10X25 		006
145 A 220 351 00 18  EXTENSION 001
150 N 304017 012006  HEXAGON HEAD BOLT
AXLE HOUSING TO EXTENSION 		004
155 A 140 352 13 76  WASHER
AXLE HOUSING TO REAR SUBFRAME,REAR 		004
155 A 140 352 13 76  WASHER
AXLE HOUSING TO EXTENSION 		004
155 A 140 352 13 76  WASHER
AXLE HOUSING TO EXTENSION 		004
160 N 910113 012003  HEXAGON NUT
AXLE HOUSING TO REAR SUBFRAME,REAR M12X1.5 		002
190 A 126 350 00 90  BREATHER
REAR AXLE HOUSING WITH DIFFERENTIAL 		001
240 A 230 350 05 90  BREATHER 001
250 A 230 351 02 68  CAP 001