REAR AXLE HOUSING WITH DIFFERENTIAL [Car] MERCEDES [EUROPA] [CHASSIS]E-KLASSE


REAR AXLE HOUSING WITH DIFFERENTIAL [Car] MERCEDES [EUROPA] [CHASSIS]E-KLASSE706050301040150140130120110400100105

REAR AXLE HOUSING WITH DIFFERENTIAL [Car] MERCEDES [EUROPA] [CHASSIS]E-KLASSE210220230250240220210260230240370360350340330320330310300270200280
Item no. Part number Designation/description Quant information
10 A 210 350 29 14  HOUSING
REAR AXLE CENTER ASSEMBLY WITH FLANGE 1:3.07;1:3,07

[697]
PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
 001
30 A 210 351 08 05  HOUSING 001
40 A 000 997 62 32  SCREW PLUG M 24X1.5 002
50 A 220 350 01 36  COVER
END COVER

[019]
"ATTENTION: USE NEW SEAL" A 002 989 73 20 10
 001
60 N 910105 010009  HEXAGON HEAD BOLT
COVER TO CASE M10X25 		010
70 A 126 350 00 90  BREATHER 001
100 A 210 350 03 45  FLANGE
INSIDE

Replaced by: A 220 350 18 45

Ident. end no.
[020]To Chassis: B 465881 => To Date: 12/10/2001
[021]To Chassis: X 067300 => To Date: 01/10/2001
 002
100 A 220 350 18 45  FLANGE
INSIDE

Replaced by: A 220 350 25 45
• A 025 997 26 47 [2 pcs.]

Ident. end no.
[020]To Chassis: B 465881 => To Date: 12/10/2001
[021]To Chassis: X 067300 => To Date: 01/10/2001
 002
100 A 220 350 25 45  JOINT FLANGE
INSIDE

Ident. end no.
[022]From Chassis: B 465882 => From Date: 12/10/2001
[023]From Chassis: X 067301 => From Date: 01/10/2001
 002
105 A 220 357 06 90  PROTECTIVE RING
INTERIOR FLANGE

[024]
IMPORTANT: SEALING RING AND PROTECTIVE RING MUST ALWAYS BE EXCHANGED TOGETHER!
 002
110 A 210 997 02 46  SEAL RING
INTERIOR FLANGE

Replaced by: A 024 997 46 47 		002
110 A 024 997 46 47  SEAL RING
INTERIOR FLANGE

Replaced by: A 024 997 97 47 		002
110 A 024 997 97 47  SEAL RING
INTERIOR FLANGE

Replaced by: A 025 997 26 47
• A 220 357 06 90 [1 pcs.] 		002
110 A 025 997 26 47  SEAL RING
INTERIOR FLANGE

[024]
IMPORTANT: SEALING RING AND PROTECTIVE RING MUST ALWAYS BE EXCHANGED TOGETHER!
 002
120 A 210 994 01 41  FUSE
AS REQUIRED 3.60 MM 		002
120 A 210 994 02 41  FUSE
AS REQUIRED 3.70 MM

[402]
NO LONGER AVAILABLE
 002
120 A 210 994 03 41  FUSE
AS REQUIRED 3.80 MM

[402]
NO LONGER AVAILABLE
 002
120 A 210 994 04 41  FUSE
AS REQUIRED 3.85 MM 		002
120 A 210 994 05 41  FUSE
AS REQUIRED 3.90 MM 		002
120 A 210 994 06 41  FUSE
AS REQUIRED 3.95 MM

[402]
NO LONGER AVAILABLE
 002
120 A 210 994 07 41  FUSE
AS REQUIRED 4.00 MM 		002
120 A 210 994 08 41  FUSE
AS REQUIRED 4.05 MM

[402]
NO LONGER AVAILABLE
 002
120 A 210 994 09 41  FUSE
AS REQUIRED 4.10 MM 		002
120 A 210 994 10 41  FUSE
AS REQUIRED 4.15 MM 		002
120 A 210 994 11 41  FUSE
AS REQUIRED 4.20 MM 		002
120 A 210 994 12 41  FUSE
AS REQUIRED 4.30 MM

[402]
NO LONGER AVAILABLE
 002
120 A 210 994 13 41  FUSE
AS REQUIRED 4.40 MM

[402]
NO LONGER AVAILABLE
 002
120 A 210 994 14 41  FUSE
AS REQUIRED 4.45 MM

[402]
NO LONGER AVAILABLE
 002
120 A 210 994 15 41  FUSE
AS REQUIRED 4.50 MM

[402]
NO LONGER AVAILABLE
 002
130 A 210 980 00 02  TAPERED ROLLER BEARING
RING GEAR BEARING 		002
150 A 140 994 44 40  SNAP RING
AS REQUIRED 1.30 MM 		002
150 A 140 994 45 40  SNAP RING
AS REQUIRED 1.35 MM

[402]
NO LONGER AVAILABLE
 002
150 A 140 994 23 40  SNAP RING
AS REQUIRED 1.40 MM 		002
150 A 140 994 24 40  SNAP RING
AS REQUIRED 1.45 MM 		002
150 A 140 994 25 40  SNAP RING
AS REQUIRED 1.50 MM 		002
150 A 140 994 26 40  SNAP RING
AS REQUIRED 1.55 MM 		002
150 A 140 994 27 40  SNAP RING
AS REQUIRED 1.60 MM 		002
150 A 140 994 28 40  SNAP RING
AS REQUIRED 1.65 MM 		002
150 A 140 994 29 40  SNAP RING
AS REQUIRED 1.70 MM 		002
150 A 140 994 30 40  SNAP RING
AS REQUIRED 1.75 MM 		002
150 A 140 994 31 40  SNAP RING
AS REQUIRED 1.80 MM 		002
150 A 140 994 32 40  SNAP RING
AS REQUIRED 1.85 MM 		002
150 A 140 994 33 40  SNAP RING
AS REQUIRED 1.90 MM 		002
150 A 140 994 34 40  SNAP RING
AS REQUIRED 1.95 MM 		002
150 A 140 994 35 40  SNAP RING
AS REQUIRED 2.00 MM 		002
150 A 140 994 36 40  SNAP RING
AS REQUIRED 2.05 MM 		002
150 A 140 994 37 40  SNAP RING
AS REQUIRED 2.10 MM 		002
150 A 140 994 38 40  SNAP RING
AS REQUIRED 2.15 MM

[402]
NO LONGER AVAILABLE
 002
150 A 140 994 39 40  SNAP RING
AS REQUIRED 2.20 MM 		002
150 A 140 994 40 40  SNAP RING
AS REQUIRED 2.25 MM 		002
150 A 140 994 41 40  SNAP RING
AS REQUIRED 2.30 MM 		002
150 A 140 994 42 40  SNAP RING
AS REQUIRED 2.35 MM 		002
150 A 140 994 43 40  SNAP RING
AS REQUIRED 2.40 MM 		002
150 A 140 994 68 40  SNAP RING
AS REQUIRED 2.45 MM 		002
150 A 140 994 69 40  SNAP RING
AS REQUIRED 2.50 MM 		002
150 A 140 994 70 40  SNAP RING
AS REQUIRED 2.55 MM 		002
150 A 140 994 71 40  SNAP RING
AS REQUIRED 2.60 MM 		002
150 A 140 994 72 40  SNAP RING
AS REQUIRED 2.65 MM 		002
150 A 140 994 73 40  SNAP RING
AS REQUIRED 2.70 MM 		002
200 A 129 350 20 23  DIFFERENTIAL GEAR
LESS RING GEAR AND PINION

[402]
NO LONGER AVAILABLE
 001
210 A 115 353 12 62  PRESSURE PLATE
AS REQUIRED 1.25 MM 		002
210 A 115 353 11 62  PRESSURE PLATE
AS REQUIRED 1.30 MM 		002
210 A 115 353 16 62  PRESSURE PLATE
AS REQUIRED 1.35 MM 		002
210 A 115 353 10 62  PRESSURE PLATE
AS REQUIRED 1.40 MM 		002
210 A 115 353 17 62  PRESSURE PLATE
AS REQUIRED 1.45 MM 		002
210 A 115 353 09 62  PRESSURE PLATE
AS REQUIRED 1.50 MM 		002
210 A 115 353 18 62  PRESSURE PLATE
AS REQUIRED 1.55 MM 		002
210 A 115 353 08 62  PRESSURE PLATE
AS REQUIRED 1.60 MM 		002
210 A 115 353 19 62  PRESSURE PLATE
AS REQUIRED 1.65 MM 		002
220 A 210 353 02 15  SIDE GEAR

Ident. end no.
[026]To Chassis: B 427897 => To Date: 10/07/2001
 002
220 A 210 353 05 15  SIDE GEAR

Ident. end no.
[027]From Chassis: B 427898 => From Date: 10/07/2001
 002
230 A 210 353 01 14  DIFFERENTIAL PINION 002
240 A 210 353 02 24  SPHERICAL WASHER 002
250 A 210 353 02 21  PIN 001
260 N 001481 006008  ROLL PIN 001
270 A 210 350 43 39  GEAR SET 1:3.07 001
280 A 003 990 54 12  BOLT
RING GEAR TO DIFFERENTIAL CASE M10X1 		010
300 A 000 980 09 02  TAPERED ROLLER BEARING
DRIVE PINION 		001
310 A 126 353 01 52  SPACER WASHER
AS REQUIRED 1.50 MM 		001
310 A 126 353 02 52  SPACER WASHER
AS REQUIRED 1.55 MM 		001
310 A 126 353 03 52  SPACER WASHER
AS REQUIRED 1.60 MM 		001
310 A 126 353 04 52  SPACER WASHER
AS REQUIRED 1.65 MM 		001
310 A 126 353 05 52  SPACER WASHER
AS REQUIRED 1.70 MM 		001
310 A 126 353 06 52  SPACER WASHER
AS REQUIRED 1.75 MM 		001
310 A 126 353 07 52  SPACER WASHER
AS REQUIRED 1.80 MM 		001
310 A 126 353 08 52  SPACER WASHER
AS REQUIRED 1.85 MM 		001
310 A 126 353 09 52  SPACER WASHER
AS REQUIRED 1.90 MM 		001
310 A 126 353 10 52  SPACER WASHER
AS REQUIRED 1.95 MM 		001
310 A 126 353 11 52  SPACER WASHER
AS REQUIRED 2.00 MM 		001
310 A 126 353 12 52  SPACER WASHER
AS REQUIRED 2.05 MM 		001
310 A 126 353 13 52  SPACER WASHER
AS REQUIRED 2.10 MM 		001
310 A 126 353 14 52  SPACER WASHER
AS REQUIRED 2.15 MM 		001
310 A 126 353 15 52  SPACER WASHER
AS REQUIRED 2.20 MM 		001
310 A 126 353 16 52  SPACER WASHER
AS REQUIRED 2.25 MM 		001
310 A 126 353 17 52  SPACER WASHER
AS REQUIRED 2.30 MM 		001
310 A 126 353 18 52  SPACER WASHER
AS REQUIRED 2.35 MM 		001
310 A 126 353 19 52  SPACER WASHER
AS REQUIRED 2.40 MM 		001
320 A 126 353 00 42  SPACER BUSHING 001
330 A 126 353 00 62  PRESSURE PLATE 002
340 A 002 980 18 02  TAPERED ROLLER BEARING
DRIVE PINION 		001
350 A 024 997 45 47  SEAL RING
DRIVE PINION

Replaced by: A 024 997 99 47 		001
350 A 024 997 99 47  SEAL RING
DRIVE PINION

[028]
WARNING! THE FLANGE MUST ALSO BE ORDERED AS PER CURRENT EPC LITERATURE
 001
360 A 210 350 15 45  FLANGE 100 MM

Replaced by: A 220 350 14 45
• A 024 997 99 47 [1 pcs.]

Ident. end no.
[033]To Chassis: B 243965 => To Date: 11/08/2000
[034]To Chassis: X 048753 => To Date: 01/09/2000
 001
360 A 220 350 14 45  FLANGE 100 MM

Replaced by: A 220 350 22 45
• A 024 997 99 47 [1 pcs.]

Ident. end no.
[030]To Chassis: X 070636 => To Date: 02/01/2002
[035]From Chassis: B 243966 => From Date: 11/08/2000
[036]From Chassis: X 048754 => From Date: 01/09/2000
[037]To Chassis: B 495872 => To Date: 18/01/2002
 001
360 A 220 350 22 45  JOINT FLANGE 100 MM

Ident. end no.
[032]From Chassis: X 070637 => From Date: 02/01/2002
[038]From Chassis: B 495873 => From Date: 18/01/2002
 001
370 A 210 353 05 72  NUT M29X1.5 001
400 A 210 350 95 14  REPAIR KIT
FASTENERS FOR REAR AXLE CENTRE PIECE 		001