REAR AXLE HOUSING WITH DIFFERENTIAL [Car] MERCEDES [EUROPA] [CHASSIS]E-KLASSE


REAR AXLE HOUSING WITH DIFFERENTIAL [Car] MERCEDES [EUROPA] [CHASSIS]E-KLASSE15271118955140861345653807782

REAR AXLE HOUSING WITH DIFFERENTIAL [Car] MERCEDES [EUROPA] [CHASSIS]E-KLASSE595365911627415277958914068831376

REAR AXLE HOUSING WITH DIFFERENTIAL [Car] MERCEDES [EUROPA] [CHASSIS]E-KLASSE501444107104110116125128131113113181720232626233229201718

REAR AXLE HOUSING WITH DIFFERENTIAL [Car] MERCEDES [EUROPA] [CHASSIS]E-KLASSE1551521101071131131161251317153
Item no. Part number Designation/description Quant information
5 A 202 350 24 14  HOUSING
REAR AXLE HOUSING WITH DIFFERENTIAL, MANUAL FIVE-SPEED TRANSMISSION 1:3,67

[697]
PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
 001
5 A 202 350 22 14  HOUSING

Replaced by: A 210 350 22 62 		-
5 A 210 350 22 62  AXLE HOUSING
REAR AXLE HOUSING WITH DIFFERENTIAL, AUTOMATIC FOUR-SPEED TRANSMISSION 1:3,27

[697]
PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
[861]
Up to ident. no.:
A 177063
J 024801
EXCEPT CODE 807
ALSO INSTALLED IN VEHICLE FROM A 177064, J 024802 WITH CODE 806
 001
5 A 210 350 25 14  HOUSING
REAR AXLE HOUSING WITH DIFFERENTIAL, AUTOMATIC FIVE-SPEED TRANSMISSION 1:3,46

[870]
As of ident. no.
A 177064
J 024802
EXCEPT CODE 806
ALSO INSTALLED IN VEHICLE TO A 177063, J 024801 WITH CODE 807
 001
8 A 124 351 05 05  HOUSING 001
11 A 186 997 00 32  SCREW PLUG 002
14 A 124 350 69 23  DIFFERENTIAL GEAR
LESS RING GEAR AND PINION 		001
14 A 124 350 63 23  DIFFERENTIAL GEAR
LESS RING GEAR AND PINION

[861]
Up to ident. no.:
A 177063
J 024801
EXCEPT CODE 807
ALSO INSTALLED IN VEHICLE FROM A 177064, J 024802 WITH CODE 806
 001
14 A 124 350 69 23  DIFFERENTIAL GEAR
LESS RING GEAR AND PINION

[870]
As of ident. no.
A 177064
J 024802
EXCEPT CODE 806
ALSO INSTALLED IN VEHICLE TO A 177063, J 024801 WITH CODE 807
 001
----- Q 000000000001  IMPORTANT INFORMATION
BREAK-DOWN OF DIFFERENTIAL GEAR 		099
17 A 115 353 12 62  THRUST WASHER
AS REQUIRED 1.25 MM 		002
17 A 115 353 11 62  THRUST WASHER
AS REQUIRED 1.30 MM 		002
17 A 115 353 16 62  THRUST WASHER
AS REQUIRED 1.35 MM 		002
17 A 115 353 10 62  THRUST WASHER
AS REQUIRED 1.40 MM 		002
17 A 115 353 17 62  THRUST WASHER
AS REQUIRED 1.45 MM 		002
17 A 115 353 09 62  THRUST WASHER
AS REQUIRED 1.50 MM 		002
17 A 115 353 18 62  THRUST WASHER
AS REQUIRED 1.55 MM 		002
17 A 115 353 08 62  THRUST WASHER
AS REQUIRED 1.60 MM 		002
17 A 115 353 19 62  THRUST WASHER
AS REQUIRED 1.65 MM 		002
20 A 115 353 03 15  SIDE GEAR

Replaced by: A 211 353 01 15 		-
20 A 211 353 01 15  SIDE GEAR 002
23 A 107 353 00 14  DIFFERENTIAL PINION 002
26 A 115 353 03 24  SPHERICAL WASHER 002
29 A 124 353 07 21  PIN 001
32 N 001481 006007  CLAMPING SLEEVE 001
44 A 124 350 36 39  RING GEAR AND PINION

Replaced by: A 124 350 48 39 		-
44 A 124 350 48 39  RING GEAR AND PINION

Replaced by: A 124 350 49 39 		-
44 A 124 350 49 39  RING GEAR AND PINION 1:3,67 001
44 A 124 350 22 39  RING GEAR AND PINION 1:3,27

[861]
Up to ident. no.:
A 177063
J 024801
EXCEPT CODE 807
ALSO INSTALLED IN VEHICLE FROM A 177064, J 024802 WITH CODE 806
 001
44 A 124 350 16 39  RING GEAR AND PINION

Replaced by: A 124 350 56 39 		-
44 A 124 350 56 39  RING GEAR AND PINION 1:3,46

[870]
As of ident. no.
A 177064
J 024802
EXCEPT CODE 806
ALSO INSTALLED IN VEHICLE TO A 177063, J 024801 WITH CODE 807
 001
50 A 123 990 30 01  SCREW

Replaced by: A 202 990 28 01 		-
50 A 202 990 28 01  SCREW
RING GEAR TO DIFFERENTIAL CASE 		010
----- Q 000000000001  IMPORTANT INFORMATION
DIFFERENTIAL GEAR BEARING 		099
53 A 001 980 21 02  TAPERED ROLLER BEARING
RING GEAR BEARING 		002
56 A 123 994 01 41  LOCK
AS REQUIRED 3.60 MM 		002
56 A 123 994 02 41  LOCK
AS REQUIRED 3.70 MM 		002
56 A 123 994 03 41  LOCK
AS REQUIRED 3.80 MM 		002
56 A 123 994 04 41  LOCK
AS REQUIRED 3.85 MM 		002
56 A 123 994 05 41  LOCK
AS REQUIRED 3.90 MM 		002
56 A 123 994 06 41  LOCK
AS REQUIRED 3.95 MM 		002
56 A 123 994 07 41  LOCK
AS REQUIRED 4.00 MM 		002
56 A 123 994 08 41  LOCK
AS REQUIRED 4.05 MM 		002
56 A 123 994 09 41  LOCK
AS REQUIRED 4.10 MM 		002
56 A 123 994 10 41  LOCK
AS REQUIRED 4.15 MM 		002
56 A 123 994 11 41  LOCK
AS REQUIRED 4.20 MM 		002
56 A 123 994 12 41  LOCK
AS REQUIRED 4.30 MM 		002
56 A 123 994 13 41  LOCK
AS REQUIRED 4.40 MM 		002
71 A 020 997 23 47  SEAL RING

Replaced by: A 022 997 98 47
• A 208 350 00 45 [2 pcs.] 		-
71 A 022 997 98 47  SEAL RING
INTERIOR FLANGE 		002
77 A 210 350 31 14  REPAIR KIT

Replaced by: A 210 350 94 14

[004]
FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. A 313878
IMPORTANT: OBSERVE CHANGED TIGHTENING TORQUES
 -
77 A 210 350 94 14  REPAIR KIT 001
80 A 124 350 52 45  FLANGE

Replaced by: A 208 350 00 45
• A 022 997 98 47 [2 pcs.] 		-
80 A 208 350 00 45  FLANGE
INSIDE 		002
86 A 123 357 15 52  SPACER WASHER
AS REQUIRED 0.70 MM 		002
86 A 123 357 14 52  SPACER WASHER
AS REQUIRED 0.80 MM 		002
86 A 123 357 13 52  SPACER WASHER
AS REQUIRED 0.85 MM 		002
86 A 123 357 12 52  SPACER WASHER
AS REQUIRED 0.90 MM 		002
86 A 123 357 11 52  SPACER WASHER
AS REQUIRED 0.95 MM 		002
86 A 123 357 10 52  SPACER WASHER
AS REQUIRED 1.00 MM 		002
86 A 123 357 09 52  SPACER WASHER
AS REQUIRED 1.05 MM 		002
86 A 123 357 08 52  SPACER WASHER
AS REQUIRED 1.10 MM 		002
86 A 123 357 07 52  SPACER WASHER
AS REQUIRED 1.15 MM 		002
86 A 123 357 06 52  SPACER WASHER
AS REQUIRED 1.20 MM 		002
86 A 123 357 05 52  SPACER WASHER
AS REQUIRED 1.25 MM 		002
86 A 123 357 04 52  SPACER WASHER
AS REQUIRED 1.30 MM 		002
86 A 123 357 03 52  SPACER WASHER
AS REQUIRED 1.35 MM 		002
86 A 123 357 02 52  SPACER WASHER
AS REQUIRED 1.40 MM 		002
86 A 123 357 01 52  SPACER WASHER
AS REQUIRED 1.50 MM 		002
95 A 115 994 04 34  SNAP RING 002
----- Q 000000000001  IMPORTANT INFORMATION
DRIVE PINION BEARING 		-
104 A 116 353 11 52  SPACER WASHER
AS REQUIRED 1.50 MM 		001
104 A 116 353 20 52  SPACER WASHER
AS REQUIRED 1.55 MM 		001
104 A 116 353 21 52  SPACER WASHER
AS REQUIRED 1.60 MM 		001
104 A 116 353 22 52  SPACER WASHER
AS REQUIRED 1.65 MM 		001
104 A 116 353 23 52  SPACER WASHER
AS REQUIRED 1.70 MM 		001
104 A 116 353 24 52  SPACER WASHER
AS REQUIRED 1.75 MM 		001
104 A 116 353 25 52  SPACER WASHER
AS REQUIRED 1.80 MM 		001
104 A 116 353 26 52  SPACER WASHER
AS REQUIRED 1.85 MM 		001
104 A 116 353 27 52  SPACER WASHER
AS REQUIRED 1.90 MM 		001
104 A 116 353 28 52  SPACER WASHER
AS REQUIRED 1.95 MM 		001
104 A 116 353 29 52  SPACER WASHER
AS REQUIRED 2.00 MM 		001
104 A 116 353 30 52  SPACER WASHER
AS REQUIRED 2.05 MM 		001
104 A 116 353 31 52  SPACER WASHER
AS REQUIRED 2.10 MM 		001
104 A 116 353 32 52  SPACER WASHER
AS REQUIRED 2.15 MM 		001
104 A 116 353 33 52  SPACER WASHER
AS REQUIRED 2.20 MM 		001
104 A 116 353 34 52  SPACER WASHER
AS REQUIRED 2.25 MM 		001
104 A 116 353 35 52  SPACER WASHER
AS REQUIRED 2.30 MM 		001
104 A 116 353 36 52  SPACER WASHER
AS REQUIRED 2.35 MM 		001
104 A 116 353 37 52  SPACER WASHER
AS REQUIRED 2.40 MM 		001
107 A 000 980 84 02  TAPERED ROLLER BEARING
DRIVE PINION 		001
110 A 108 353 00 42  SPACER BUSHING 001
113 A 109 353 10 62  THRUST WASHER 002
116 A 002 980 11 02  TAPERED ROLLER BEARING
DRIVE PINION 		001
125 A 020 997 21 47  SEAL RING

Replaced by: A 022 997 99 47

[055]
FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. A 615860
 -
125 A 022 997 99 47  SEAL RING
DRIVE PINION

Replaced by: A 025 997 00 47 		001
125 A 025 997 00 47  SEAL RING
DRIVE PINION

[099]
IMPORTANT! THE FLANGE MUST ALSO BE ORDERED AS PER CURRENT EPC LITERATURE
 001
128 A 124 350 68 45  FLANGE

Replaced by: A 211 350 00 45
• A 022 997 99 47 [1 pcs.] 		-
128 A 211 350 00 45  FLANGE

Replaced by: A 211 350 03 45
• A 025 997 00 47 [1 pcs.] 		-
128 A 211 350 03 45  FLANGE
JOINT FLANGE 90 MM 		001
131 A 123 353 00 72  NUT

Replaced by: A 221 353 02 72 		001
131 A 221 353 02 72  NUT 001
134 A 124 351 30 08  COVER

Replaced by: A 124 351 37 08 		-
134 A 124 351 37 08  COVER
END COVER 		001
140 A 000 990 32 04  SCREW

Replaced by: N 910143 010009 		-
140 N 910143 010009  SCREW 008
152 A 126 350 00 90  VALVE 001
155 A 210 350 53 14  REPAIR KIT
REAR AXLE HOUSING WITH DIFFERENTIAL

[010]
ORDER ADDITIONALLY FASTENERS FOR REAR AXEL CENTRE PIECE
 001