AXLE SHAFT [Car] MERCEDES [EUROPA] [CHASSIS]500


AXLE SHAFT [Car] MERCEDES [EUROPA] [CHASSIS]500232017111429514811353226
Item no. Part number Designation/description Quant information
5 A 140 350 49 10  AXLE SHAFT 002
8 A 129 350 01 37  PROTECTIVE CAP

Replaced by: A 129 357 01 91 		-
8 A 129 357 01 91  BOOT
AXLE SHAFT,OUTSIDE BOOT

[026]
Up to ident. no.:A 256645
[028]
FROM IDENT. NO. A 256645 TO A 266015 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO A 256645
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. A 256646
 002
8 A 210 357 00 91  BOOT

Replaced by: A 210 357 01 91 		-
8 A 210 357 01 91  BOOT
AXLE SHAFT,OUTSIDE BOOT

[027]
As of ident. no.A 256646
[028]
FROM IDENT. NO. A 256645 TO A 266015 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO A 256645
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. A 256646
 002
11 A 124 997 30 90  LOOM TIE
MAJOR

[026]
Up to ident. no.:A 256645
[028]
FROM IDENT. NO. A 256645 TO A 266015 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO A 256645
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. A 256646
 004
11 A 210 997 06 90  LOOM TIE
MAJOR

[027]
As of ident. no.A 256646
[028]
FROM IDENT. NO. A 256645 TO A 266015 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO A 256645
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. A 256646
 004
14 A 129 997 01 90  LOOM TIE

Replaced by: A 129 997 36 90 		-
14 A 129 997 36 90  LOOM TIE
MINOR

[026]
Up to ident. no.:A 256645
[028]
FROM IDENT. NO. A 256645 TO A 266015 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO A 256645
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. A 256646
 004
14 A 202 997 04 90  LOOM TIE
MINOR

[027]
As of ident. no.A 256646
[028]
FROM IDENT. NO. A 256645 TO A 266015 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO A 256645
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. A 256646
 004
17 A 140 350 11 13  JOINT
ANNULAR JOINT,INSIDE 		002
20 N 000983 028000  LOCK RING
ANNULAR JOINT ON AXLE SHAFT 		002
23 A 140 357 00 89  LOCKING CAP 002
26 A 140 350 04 37  REPAIR KIT

Replaced by: A 140 350 13 37

[044]
FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. A 353296
IMPORTANT: OBSERVE CHANGED TIGHTENING TORQUES
 -
26 A 140 350 13 37  REPAIR KIT
AXLE SHAFT,INSIDE BOOT

[026]
Up to ident. no.:A 256645
[027]
As of ident. no.A 256646
 002
26 A 140 350 08 37  REPAIR KIT

Replaced by: A 140 350 15 37

[044]
FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. A 353296
IMPORTANT: OBSERVE CHANGED TIGHTENING TORQUES
 -
26 A 140 350 15 37  REPAIR KIT
AXLE SHAFT,INSIDE BOOT

[027]
As of ident. no.A 256646
[028]
FROM IDENT. NO. A 256645 TO A 266015 MEASURE THE WIDTH OF THE HOSE CLAMP.
WITH A WIDTH OF 9 MM USE RANGE OF PARTS UP TO IDENT NO A 256645
WITH A WIDTH OF 7 MM USE RANGE OF PARTS FROM IDENT NO. A 256646
 002
29 A 126 357 09 75  WASHER
AXLE SHAFT TO INTERIOR FLANGE 		004
32 A 001 990 10 12  SCREW

Replaced by: A 001 990 69 12 		-
32 A 001 990 69 12  SCREW
AXLE SHAFT TO INTERIOR FLANGE 		012
35 A 140 357 01 72  NUT

Replaced by: A 140 357 03 72

[044]
FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. A 353296
IMPORTANT: OBSERVE CHANGED TIGHTENING TORQUES
 -
35 A 140 357 03 72  NUT
AXLE SHAFT TO REAR AXLE SHAFT FLANGE 		002