ELECTRICAL EQUIPMENT AND INSTRUMENTS [Car] MERCEDES [EUROPA] [CHASSIS]TYP 219


ELECTRICAL EQUIPMENT AND INSTRUMENTS [Car] MERCEDES [EUROPA] [CHASSIS]TYP 2191511501571729108762313314514314820672139383740161731241312325186313213313526271564651711681671691603216162

ELECTRICAL EQUIPMENT AND INSTRUMENTS [Car] MERCEDES [EUROPA] [CHASSIS]TYP 2198910991907372101711161151101001111491131141371391381401171751761771781186188854256188612312412712813080818283878473a
Item no. Part number Designation/description Quant information
BATTERY, STARTER CABLE
1 A 000 541 46 01  LEAD BATTERY 12 V 56 AH 001
----- A 000 541 12 01  LEAD BATTERY 12 V 56 AH
TROPICAL DESIGN 		001
----- A 000 541 58 01  SPECIAL COLD
START BATTERY FOR REGIONS WITH COLD TEMPERATURES 		001
----- A 121 540 01 23  FIXING FRAME

Replaced by: A 111 540 00 23
2 A 111 540 00 23  FIXING FRAME 001
3 A 120 541 01 24  TIGHTENING SCREW
FOR FIXING OF BATTERY 		002
----- LOCK WASHER
B 6 DIN 127 FOR FIXING OF BATTERY 		002
----- HEX. NUT
M 6 DIN 934-5 S FOR FIXING OF BATTERY 		002
----- A 000 987 05 32  RUBBER HOSE, 20 MM LONG
ABOVE ANGLE OF SUPPORTING RAIL, BATTERY ORDER BY THE METER 		002
----- A 180 540 00 30  STARTER CABLE
FROM POS. POLE TO STARTER MOTOR

Replaced by: A 128 540 00 30
6 A 128 540 00 30  STARTER CABLE
FROM POS. POLE TO STARTER MOTOR
----- A 180 540 01 30  STARTER CABLE
FROM POS. POLE TO STARTER MOTOR
----- A 136 546 00 35  RUBBER PROTECTIVE CAP
FOR STARTER CABLE

Replaced by: A 111 546 00 35
7 A 111 546 00 35  RUBBER PROTECTIVE CAP
FOR STARTER CABLE 		001
8 A 180 540 00 31  GROUND CABLE
FROM NEG.POLE OF BATTERY TO ENGINE
----- A 180 540 04 31  GROUND CABLE
FROM NEG.POLE OF BATTERY TO ENGINE
9 A 000 997 34 81  GROMMET
FOR STARTER CABLE THROUGH BRACKET AT FRONT WALL
10 A 186 997 07 81  GROMMET
FOR STARTER CABLE THROUGH PARTITION 		001
----- A 136 995 04 20  FIXING CLAMP
FOR STARTER CABLE AT COWL OR PEDAL FLOOR RESP.
----- LENS-HD. SHEET
METAL SCREW BZ 4, 8X9, 5 DIN 7981 FOR STARTER CABLE AT COWL OR PEDAL FLOOR RESP.
CABLES
----- A 105 540 00 05  MAIN CABLE HARNESS
UP TO CHASSIS 7501979
----- A 105 540 02 05  REPLACED BY
105 540 04 05 TOGETHER WITH 1 FUSE BOX 180 540 04 50 FROM CHASSIS 7501980-7504312
15 A 105 540 04 05  MAIN CABLE HARNESS
FROM CHASSIS 7504313
----- A 105 540 01 05  MAIN CABLE HARNESS
UP TO CHASSIS 7502567
----- A 105 540 03 05  REPLACED BY
105 540 05 05 TOGETHER WITH 1 FUSE BOX 180 540 04 50 FROM CHASSIS 7502568-7504312
----- A 105 540 05 05  MAIN CABLE HARNESS
FROM CHASSIS 7504313
16 A 000 545 06 28  HOUSING, LOWER
PART, WITH SOCKET 		001
17 A 000 545 00 80  GASKET 001
----- A 180 540 07 09  AUXILIARY CABLE HARNESS
----- A 180 540 09 09  AUXILIARY CABLE HARNESS
----- A 121 540 01 07  CABLE HARNESS
FOR TAIL LAMPS UP TO CHASSIS 7504312
----- A 121 540 02 07  CABLE HARNESS
FOR TAIL LAMPS UP TO CHASSIS 7504312
18 A 121 540 08 07  CABLE HARNESS
FOR TAIL LAMPS FROM CHASSIS 7504313 		001
----- A 180 540 08 09  AUXILIARY CABLE HARNESS
FROM CONTROL SWITCH, REAR AXLE TO GROUND AS WELL AS LIMIT SWITCH, SERVO AGGREGATE
----- A 180 540 29 38  GROUND CABLE
FROM RELAY, TERMINAL 30/51, TO GROUND
20 A 180 540 00 08  CABLE HARNESS
FROM GENERATOR TO REGULATOR 		001
21 A 000 546 02 35  RUBBER PROTECTIVE CAP
FOR TERMINAL AT GENERATOR DPOS. AND DF 		002
----- INSULATING HOSE,
220-MM LONG B 10X11, 5 SW DIN 40621 FOR CABLE LAYING TO BLINKER, FRONT ORDER BY THE METER 		002
----- INSULATING HOSE,
100-MM LONG B 16 X 18 SW DIN 40621 OVER MAIN CABLE HARNESS, ROTARY SWITCH ORDER BY THE METER 		001
23 A 120 540 17 38  CABLE HARNESS
FROM CABLE CONNECTORTTWO POLES TO REVERSE DRIVE LIGHT SWITCH
----- A 180 540 31 38  CABLE HARNESS
FROM CABLE CONNECTORTTWO POLES TO REVERSE DRIVE LIGHT SWITCH
24 A 180 546 00 43  BRACKET
FOR CABLE HARNESS AT REVERSE DRIVE LIGHT SWITCH 		001
25 A 000 997 31 81  GROMMET
FOR CABLE HARNESS AT BRACKET 		001
----- A 136 995 00 37  FIXING CLAMP
FOR CABLE OF REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT UP TO CHASSIS 8504872
----- LENS-HD. SHEET
METAL SCREW BZ 4, 8X9,5 DIN 7981 FOR CABLE OF REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT UP TO CHASSIS 8504872
----- A 120 995 00 01  FIXING CLAMP
FOR CABLE OF REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT UP TO CHASSIS 8504872
----- LENS-HD. SCREW
AM 5X10 DIN 7985-4S FOR CABLE OF REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT UP TO CHASSIS 8504872
----- LOCK WASHER
B 5 DIN 127 FOR CABLE OF REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT UP TO CHASSIS 8504872
----- A 136 540 04 41  GROUND CABLE
FROM STARTER FLANGE TO FRONT WALL

Replaced by: A 186 540 03 41
26 A 186 540 03 41  GROUND CABLE
FROM STARTER FLANGE TO FRONT WALL 		001
----- LOCK WASHER
B 6 DIN 127 FOR GROUND CABLE AT FRONT WALL OR BRACKET RESP. ATE BOOSTER BRAKE 		001
----- HEX. -HD. SCREW
M 6X8 DIN 933-8 G FOR GROUND CABLE AT FRONT WALL OR BRACKET RESP. ATE BOOSTER BRAKE 		001
27 A 120 420 02 27  SCREW WITH LOCKING PLATE
FOR GROUND CABLE, HEAD LIGHT AND FOG LAMP AT WHEEL ARCH PAN 		001
----- LOCK WASHER
B 6 DIN 127 FOR GROUND CABLE, HEAD LIGHT AND FOG LAMP AT WHEEL ARCH PAN 		001
----- HEX. NUT
M 6 DIN 934-5 S FOR GROUND CABLE, HEAD LIGHT AND FOG LAMP AT WHEEL ARCH PAN 		001
31 A 000 546 19 41  CABLE CONNECTOR, 5 POLES
FOR TAIL LIGHT CABLE HARNESS
31 A 000 546 19 41  CABLE CONNECTOR, 5 POLES
FOR TAIL LIGHT CABLE HARNESS
----- A 000 546 17 41  CABLE CONNECTOR, 6 POLES
FOR TAIL LIGHT CABLE HARNESS
32 A 000 546 06 41  CABLE CONNECTOR, 5 POLES
FOR STEERING SPINDLE TUBE CABLE HARNESS 		001
33 A 000 546 18 41  CABLE CONNECTOR, 2 POLES
FOR HEATING BLOWER CONNECTION 		002
----- LENS-HD. SHEET
METAL SCREW BZ 3, 9X9, 5 DIN 7981 FOR CABLE CONNECTOR, 5 POLES AT FRONT WALL 		004
----- LENS-HD. SHEET
METAL SCREW B 3, 9X19 DIN 7981 FOR CABLE CONNECTOR, 5 POLES AT WHEEL ARCH PAN 		002
----- LENS-HD. SHEET
METAL SCREW B 3, 9X13 DIN 7981 FOR CABLE CONNECTOR, 2 POLES AT WHEEL ARCH PAN 		004
37 A 181 997 00 81  GROMMET
FOR MAIN CABLE HARNESS THROUGH FRONT WALL 		001
38 A 000 997 27 81  GROMMET
FOR MAIN CABLE HARNESS THROUGH FRONT WALL
----- A 000 997 30 81  GROMMET
FOR MAIN CABLE HARNESS THROUGH FRONT WALL
39 A 000 988 53 78  FIXING CLAMP
FOR MAIN CABLE HARNESS THROUGH FRONT WALL 		003
40 A 000 988 34 78  FIXING CLAMP
FOR MAIN CABLE HARNESS THROUGH FRONT WALL 		003
----- A 000 546 00 42  CABLE CONNECTOR
FOR CABLE FROM SHIFTING LEVER TO CONTROL VALVE
----- A 000 997 17 81  GROMMET
FOR FUEL TRANSMITTER CABLE

Replaced by: A 000 997 18 81
42 A 000 997 18 81  GROMMET
FOR FUEL TRANSMITTER CABLE 		001
----- A 000 997 22 81  GROMMET
FOR LUGGAGE COMPARTMENT COVER, INNER PANEL UP TO CHASSIS 7504312 		001
----- A 000 997 30 81  GROMMET
FOR TAILLIGHT CABLE HARNESS, REAR SEAT SUPPORT UP TO CHASSIS 7501186 		002
----- INSULATING HOSE,
40-MM LONG B 12X13, 6 SW DIN 40621 FOR MAIN CABLE HARNESS AT WHEEL ARCH PAN, LEFT AND RIGHT ORDER BY THE METER 		004
----- A 000 988 33 78  FIXING CLAMP
FOR TAIL LIGHT CABLE HARNESS AT COVER PLATE AND FOR CABLE TO HORN 		009
----- A 000 988 34 78  FIXING CLAMP
FOR TAIL LIGHT CABLE HARNESS AT COVER PLATE AND FOR CABLE TO HORN 		005
----- A 186 995 02 20  FIXING CLAMP
FOR TRANSMITTER CABLE UP TO CHASSIS 7504312 		001
----- LOCK WASHER
B 5 DIN 127 FOR TRANSMITTER CABLE UP TO CHASSIS 7504312 		001
----- LENS-HD. SCREW
AM 5X10 DIN 7985-4 S FOR TRANSMITTER CABLE UP TO CHASSIS 7504312 		001
----- LENS-HD. SHEET
METAL SCREW B 4,8X9,5 DIN 7981 FOR GROUND CABLE, TRANSMITTER, AT REAR CROSS MEMBER FROM CHASSIS 7504313 		001
----- FIXING CLAMP
1X8 DIN 72571 FOR TAIL LIGHT CABLE HARNESS UP TO CHASSIS 7504312 		001
----- LENS-HD. SCREW
AM 4X10 DIN 7985-4 S FOR TAIL LIGHT CABLE HARNESS UP TO CHASSIS 7504312 		001
----- LOCK WASHER
B 4 DIN 127 FOR TAIL LIGHT CABLE HARNESS UP TO CHASSIS 7504312 		001
----- HEX. NUT
M 4 DIN 934-5 S FOR TAIL LIGHT CABLE HARNESS UP TO CHASSIS 7504312 		001
56 A 120 546 01 82  LINK
FOR TAIL LIGHT CABLE HARNESS, LEFT AND RIGHT 		008
----- LOCK WASHER
B 4 DIN 127 FOR GROUND CONNECTION, TAIL LIGHT 		002
----- LENS-HD. SCREW
AM 4X10 DIN 7985-4 S FOR GROUND CONNECTION, TAIL LIGHT 		002
----- A 000 988 17 78  FIXING CLAMP
FOR CABLE TO LICENCE PLATE LIGHT AT LUGGAGE COMPARTMENT COVER UP TO CHASSIS 7504312 		002
----- A 186 995 02 20  FIXING CLAMP
FOR CABLE TO LICENCE PLATE LIGHT AT LUGGAGE COMPARTMENT COVER UP TO CHASSIS 7504312 		002
61 A 120 546 00 81  CABLE COVER PLATE
FOR CABLE PROTECTIVE PLATE AT REAR CROSS MEMBER 		001
----- LENS-HD. SHEET
METAL SCREW B 3,9X13 DIN 7981 FOR CABLE PROTECTIVE PLATE AT REAR CROSS MEMBER 		002
----- A 186 995 02 20  FIXING CLAMP
FOR CABLE TO CONTROL SWITCH AT REAR CROSS MEMBER
----- LENS-HD. SHEET
METAL SCREW B 3,9X13 DIN 7981 FOR CABLE TO CONTROL SWITCH AT REAR CROSS MEMBER
62 A 120 995 00 01  FIXING CLAMP
FOR CABLE FIXING AT LEFT PEDAL LEVER SHAFT MOUNTING
----- LENS-HD. SCREW
AM 5X12 DIN 7985-4 S FOR CABLE FIXING AT LEFT PEDAL LEVER SHAFT MOUNTING
----- LOCK WASHER
B 5 DIN 127 FOR CABLE FIXING AT LEFT PEDAL LEVER SHAFT MOUNTING
63 A 136 995 00 37  FIXING CLAMP
FOR MAIN CABLE HARNESS AT FRONT WALL
63 A 136 995 00 37  FIXING CLAMP
FOR MAIN CABLE HARNESS AT FRONT WALL
----- LENS-HD. SCREW
AM 4X12 DIN 7985-4 S FOR MAIN CABLE HARNESS AT FRONT WALL 		001
----- LOCK WASHER
B 4 DIN 127 FOR MAIN CABLE HARNESS AT FRONT WALL 		001
64 A 136 995 01 35  FIXING CLAMP
FOR MAIN CABLE HARNESS AT FRONT WALL 		001
65 A 187 995 00 37  FIXING CLAMP
FOR MAIN CABLE HARNESS AT FRONT WALL
----- LENS-HD. SCREW
AM 6X15 DIN 7985-4S FOR MAIN CABLE HARNESS AT FRONT WALL 		002
----- LOCK WASHER
B 6 DIN 127 FOR MAIN CABLE HARNESS AT FRONT WALL 		002
----- LENS-HD. SHEET
METAL SCREW BZ 4,8X9,5 DIN 7981 FOR MAIN CABLE HARNESS AT FRONT WALL 		001
----- A 000 990 22 91  CAGE CLAMP WITH NUT
FOR MAIN CABLE HARNESS AT FRONT WALL 		001
----- A 120 997 08 82  RUBBER HOSE,
15X17 DIA., 20-MM LONG OVER STARTER MOTOR CABLE, GENERATOR CABLE AND MAIN CABLE HARNESS

Replaced by: A 000 997 47 82
67 A 000 997 47 82  RUBBER HOSE,
15X17 DIA., 20-MM LONG OVER STARTER MOTOR CABLE, GENERATOR CABLE AND MAIN CABLE HARNESS ORDER BY THE METER 		NB
----- A 180 540 30 38  GROUND CABLE
FOR PARKING LIGHT WITH ASYMMETRIC DIMMING LIGHT FROM CHASSIS 7505583-7507560 		002
----- A 136 995 01 35  FIXING CLAMP
FOR MAIN CABLE HARNESS AT GLOVE BOX, SHELL PLATE, TOP 		001
----- LENS-HD.SCREW
AM 6X15 DIN 7985-4 S FOR MAIN CABLE HARNESS AT GLOVE BOX, SHELL PLATE, TOP 		001
----- LOCK WASHER
B 6 DIN 127 FOR MAIN CABLE HARNESS AT GLOVE BOX, SHELL PLATE, TOP 		001
----- A 000 988 38 78  FIXING CLAMP
FOR CABLE, STOP SWITCH AT BRAKE CABLE OR FOR CABLE TO LIMIT SWITCH RESP.

Replaced by: A 001 988 09 78
----- A 001 988 09 78  FIXING CLAMP
FOR CABLE, STOP SWITCH AT BRAKE CABLE OR FOR CABLE TO LIMIT SWITCH RESP.
----- A 180 540 03 50  FUSE BOX

Replaced by: A 180 540 00 50

[001]
AS SINGLE PART NO LONGER DELIVERED, ONLY COMPLETE
----- A 180 540 00 50  FUSE BOX
UP TO CHASSIS 7504312 		001
----- A 180 540 09 50  FUSE BOX

Replaced by: A 180 540 04 50

[001]
AS SINGLE PART NO LONGER DELIVERED, ONLY COMPLETE
71 A 180 540 04 50  FUSE BOX
FROM CHASSIS 7504313 		001
72 A 000 545 02 03  COVER
FOR FUSE BOX 		001
73 FUSE, 12 AMP.
8 DIN 72581 UP TO CHASSIS 7504312 		012
73 FUSE, 12 AMP.
8 DIN 72581 FROM CHASSIS 7504313 		011
73a FUSE, 35 AMP.
25 DIN 72581 FROM CHASSIS 7504313 		001
----- LENS-HD. SHEET
METAL SCREW BZ 4,2X19 DIN 7981 		002
----- A 000 994 13 45  SPRING NUT
NO LONGER INSTALLED
----- LOCK WASHER
B 6 DIN 127 FOR BLINKER TRANSMITTER AT BRACKET, PARTITION 		002
----- HEX.-HD. SCREW
M 6X12 DIN 933-8 G FOR BLINKER TRANSMITTER AT BRACKET, PARTITION 		002
INSTRUMENTS AND CONTROLS
----- A 120 540 00 44  PUSH-BUTTON SWITCH
FOR INSTRUMENT LIGHTING

Replaced by: A 000 545 06 11
80 A 000 545 06 11  PUSH-BUTTON SWITCH
FOR INSTRUMENT LIGHTING 		001
81 A 120 545 00 72  ESCUTCHEON 001
82 A 000 997 20 40  FELT RING 001
83 A 120 545 02 37  BUTTON 001
----- A 121 542 02 01  COMBI-INSTRUMENT WITH
KM-GRADUATION RATIO 0.96 - RATIO OF REAR AXLE 1: 4.1

Replaced by: A 121 542 03 01
----- A 121 542 03 01  COMBI-INSTRUMENT WITH
KM-GRADUATION RATIO 0.96 - RATIO OF REAR AXLE 1: 4.1 UP TO CHASSIS 7503492 FURTHER VALID FOR CARS EXPORTED TO MADEIRA AN 		001
----- A 121 542 01 01  COMBI-INSTRUMENT WITH
M.P.H. GRADUATION RATIO 1.54 - RATIO OF REAR AXLE 1: 4.1 UP TO CHASSIS 7503492 FURTHER VALID FOR CARS EXPORTED TO MADEIR 		001
84 A 105 542 05 01  COMBI-INSTRUMENT WITH
KM - GRADUATION RATIO 0.91 - RATIO OF REAR AXLE 1: 3.9 FROM CHASSIS 7503493 		001
----- A 105 542 06 01  COMBI-INSTRUMENT WITH
M.P.H. GRADUATION RATIO 1.47 - RATIO OF REAR AXLE 1:3.9 FROM CHASSIS 7503493 		001
----- A 105 542 08 01  COMBI-INSTRUMENT WITH
KM.GRADUATION RATIO 0.845 - RATIO OF REAR AXLE 1: 3.9 EXPORT - SPECIAL REQUEST FOR TIRES 6.40 - 15) 		001
----- A 105 542 07 01  COMBI-INSTRUMENT WITH
M.P.H. GRADUATION RATIO 1.36 - RATIO OF REAR AXLE 1:3.9 EXPORT - SPECIAL REQUEST (FOR TIRES 6.40 - 15) 		001
----- A 001 542 43 06  KILOMETER COUNTER
FOR COMBI-INSTRUMENT 121 542 03 01 		001
----- A 001 542 42 06  MILEAGE COUNTER
FOR COMBI-INSTRUMENT 121 542 01 01 		001
85 A 001 542 74 06  KILOMETER COUNTER
FOR COMBI-INSTRUMENT 105 542 05 01 		001
----- A 001 542 75 06  MILEAGE COUNTER
FOR COMBI-INSTRUMENT 105 542 06 01 		001
----- A 001 542 80 06  KILOMETER COUNTER
FOR COMBI-INSTRUMENT 105 542 08 01 		001
----- A 001 542 81 06  MILEAGE COUNTER
FOR COMBI-INSTRUMENT 105 542 07 01 		001
86 A 000 542 71 02  OIL PRESSURE GAUGE 001
87 A 001 542 44 05 
TELETHERMOMETER CAPILLARY TUBE 1.700 MM LONG 		001
88 A 000 542 44 03  FUEL GAUGE 001
89 A 120 993 17 10  TENSION SPRING
FOR FIXING OF COMBI-INSTRUMENT 		002
90 A 120 542 02 80  RUBBER FRAME
FOR COMBI-INSTRUMENT 		001
----- A 183 545 00 19  LAMP SOCKET

Replaced by: A 000 545 07 19
91 A 000 545 07 19  LAMP SOCKET 006
----- BULB
H 12 V 2 W DIN 72601 		006
----- A 000 988 34 78  FIXING CLAMP
FOR HOUSING, UPPER PART WITH LOWER PART, AT GLOVE BOX COVER PLATE 		001
----- A 120 542 03 11  CLOCK, WITH
MECHANIC DRIVE UP TO CHASSIS 8501881 		001
100 A 120 542 05 11  CLOCK, ELECTRIC 12 VOLT
FROM CHASSIS 8501882 		001
----- A 183 545 00 19  LAMP SOCKET

Replaced by: A 000 545 07 19
101 A 000 545 07 19  LAMP SOCKET 001
----- BULB
H 12 V 2 W DIN 72601 		001
----- A 000 545 07 31  DIMMING RESISTOR
FOR INSTRUMENT LIGHTING

Replaced by: A 000 545 08 31
109 A 000 545 08 31  DIMMING RESISTOR
FOR INSTRUMENT LIGHTING 		001
110 A 000 545 17 14 
SWITCH 		001
111 A 120 545 03 72  ESCUTCHEON
FOR PUSH-BUTTON STARTING SWITCH 		001
----- A 000 545 10 24  DISTANCE FLASHLIGHT
BLINKER SWITCH, BLACK

Replaced by: A 000 545 38 24
----- A 000 545 38 24  DISTANCE FLASHLIGHT
BLINKER SWITCH, BLACK UP TO CHASSIS 7505176 		001
----- A 000 545 39 24  DISTANCE FLASHLIGHT
BLINKER SWITCH, IVORY COLOURED EXPORT, SPECIAL REQUEST UP TO CHASSIS 7505176
113 A 000 545 76 24  DISTANCE FLASHLIGHT
BLINKER SWITCH FROM CHASSIS 7505177 		001
114 A 180 545 02 37  BLINKER LEVER
KNOB, DARK GRAPHIT GREY FROM CHASSIS 7505177 		001
----- A 180 545 03 37  BLINKER LEVER
KNOB, IVORY COLOURED EXPORT, SPECIAL REQUEST FROM CHASSIS 7505177

Replaced by: A 180 545 05 37
----- A 180 545 05 37  BLINKER LEVER
KNOB, IVORY COLOURED EXPORT, SPECIAL REQUEST FROM CHASSIS 7505177 		001
115 A 180 462 00 23  COVER PLATE
FOR DISTANCE FLASHLIGHT BLINKER SWITCH FROM CHASSIS 7505177 		001
----- LENS-HD. COUNTERSUNK
SCREW AM 4X10 DIN 7988-4S VERCHROMT FOR COVER PLATE AT JACKET TUBE FROM CHASSIS 7505177 		002
116 A 000 544 23 32  BLINKER TRANSMITTER, 001
117 A 000 545 91 24  REVERSING SWITCH
FOR TURN-INDICATOR BLINKER SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTOUT FOR USA) FROM CHASSIS 75
118 A 180 545 02 37  BLINKER LEVER KNOB, BLACK
FOR REVERSING SWITCH SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTOUT FOR USA) FROM CHASSIS 7507929
----- A 180 540 16 09  AUXILIARY CABLE HARNESS
FOR TURN-INDICATOR BLINKER SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTOUT FOR USA) FROM CHASSIS 75
----- A 180 540 08 60  OIL PRESSURE GAUGE PIPE
FOR CONNECTION AT FLEXIBLE HOSE TO OIL FILTER UP TO CHASSIS 8506199
----- A 180 540 09 60  OIL PRESSURE GAUGE PIPE
FOR CONNECTION AT FLEXIBLE HOSE TO OIL FILTER UP TO CHASSIS 9502716
----- A 180 540 06 60  OIL PRESSURE GAUGE PIPE
FOR CONNECTION AT OIL PRESSURE GAUGE, COMBIINSTRUMENT UP TO CHASSIS 8506199
----- A 180 540 03 60  OIL PRESSURE GAUGE PIPE
FOR CONNECTION AT OIL PRESSURE GAUGE, COMBIINSTRUMENT UP TO CHASSIS 9502716
123 A 180 540 13 60  OIL PRESSURE GAUGE PIPE
FROM INSTRUMENT TO HOSE FROM CHASSIS 8506200
----- A 120 540 05 60  OIL PRESSURE GAUGE PIPE
FROM INSTRUMENT TO CONNECTING PIECE FROM CHASSIS 9502717
----- A 128 542 00 47  CONNECTING PIECE
FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9502717
----- A 120 540 06 60  OIL PRESSURE GAUGE PIPE
FROM CONNECTING PIECE TO HOSE FROM CHASSIS 9502717
----- A 120 997 08 82 

Replaced by: A 000 997 47 82
----- A 180 997 15 82  RUBBER HOSE 20 MM LONG
ORDER BY THE METER FOR BOX NUT TO OIL PRESSURE GAUGE PIPE

Replaced by: A 000 997 47 82
----- A 000 997 47 82  RUBBER HOSE 20 MM LONG
ORDER BY THE METER FOR BOX NUT TO OIL PRESSURE GAUGE PIPE UP TO CHASSIS 8506199
----- A 000 997 47 82  RUBBER HOSE 20 MM LONG
ORDER BY THE METER FOR BOX NUT TO OIL PRESSURE GAUGE PIPE UP TO CHASSIS 8506199
124 A 186 997 06 81  GROMMET
FOR OIL PRESSURE GAUGE PIPE AND CAPILLARY TUBE THROUGH BRACKET CUT IF REQUIRED
124 A 186 997 06 81  GROMMET
FOR OIL PRESSURE GAUGE PIPE AND CAPILLARY TUBE THROUGH BRACKET CUT IF REQUIRED UP TO CHASSIS 8506199
124 A 186 997 06 81  GROMMET
FOR OIL PRESSURE GAUGE PIPE AND CAPILLARY TUBE THROUGH BRACKET CUT IF REQUIRED UP TO CHASSIS 8506199
----- LOCK WASHER
B 10 DIN 127 FOR OIL PRESSURE GAUGE PIPE AT BRACKET, FRONT WALL UP TO CHASSIS 8506199
----- LOCK WASHER
B 10 DIN 127 FOR OIL PRESSURE GAUGE PIPE AT BRACKET, FRONT WALL UP TO CHASSIS 9502716
----- HEX. NUT
M 10 DIN 936-5 S FOR OIL PRESSURE GAUGE PIPE AT BRACKET, FRONT WALL UP TO CHASSIS 8506199
----- HEX. NUT
M 10 DIN 936-5 S FOR OIL PRESSURE GAUGE PIPE AT BRACKET, FRONT WALL UP TO CHASSIS 9502716
----- SPRING WASHER
A 8 DIN 137 FROM CHASSIS 8506200
----- SPRING WASHER
A 8 DIN 137 FROM CHASSIS 9502717
----- HEX. NUT
BM 8 DIN 439-5 S FROM CHASSIS 8506200
----- HEX. NUT
BM 8 DIN 439-5 S FROM CHASSIS 9502717
----- A 000 987 09 32  RUBBER HOSE, 25 MM LONG
FOR OIL PRESSURE GAUGE PIPE AT COWL

Replaced by: A 000 987 00 32
127 A 000 987 00 32  RUBBER HOSE, 25 MM LONG
FOR OIL PRESSURE GAUGE PIPE AT COWL ORDER BY THE METER 		002
128 A 136 995 05 01  FIXING CLAMP
FOR OIL PRESSURE GAUGE PIPE AT COWL 		002
----- LENS-HD.SHEET METAL SCREW
BZ 3,9X9,5 DIN 7981 FOR OIL PRESSURE GAUGE PIPE AT COWL 		002
----- A 136 540 02 59  HOSE
OPTIONAL FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 8506199
----- A 136 540 02 59  HOSE
OPTIONAL FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9502716
----- A 121 540 00 59  HOSE
OPTIONAL FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 8506199
----- A 121 540 00 59  HOSE
OPTIONAL FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9502716
130 A 128 540 00 59  HOSE
FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 8506200
----- A 121 540 02 59  HOSE
FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9502717
131 A 000 545 22 09  STPP LIGHT SWITCH
SEE ALSO GROUP 42 		001
132 A 000 545 04 12  FOOT DIMMER SWITCH 001
133 A 136 545 01 58  INSULATING PLATE
FOR FOOT DIMMER SWITCH AT PEDAL FLOOR 		001
----- LENS-HD. COUNTERSUNK
SCREW BM 4X30 DIN 7988-4 S FOR FOOT DIMMER SWITCH AT PEDAL FLOOR 		002
135 A 000 990 25 91  CAGE CLIP WITH NUT
FOR FOOT DIMMER SWITCH AT PEDAL FLOOR 		002
----- A 000 997 27 81  GROMMET
FOR CABLE TO FOOT DIMMER SWITCH
137 A 120 542 03 07  FLEXIBLE DRIVE
SHAFT, 1.750-MM LONG
----- A 105 542 00 07  FLEXIBLE DRIVE
SHAFT, 1.820-MM LONG
138 A 180 997 12 81  GROMMET
FOR FLEXIBLE DRIVE SHAFT THROUGH FORK MEMBER
----- A 186 997 04 81  GROMMET
FOR FLEXIBLE DRIVE SHAFT THROUGH FORK MEMBER
139 A 180 987 00 44  GROMMET
FOR LOCKING PASSAGE OF THIRD FORK MEMBER
----- A 000 987 00 44  LOCKING WASHER
FOR LOCKING PASSAGE OF THIRD FORK MEMBER

Replaced by: A 000 987 04 44
----- A 000 987 04 44  LOCKING WASHER
RUBBER FOR LOCKING PASSAGE OF THIRD FORK MEMBER
----- A 000 988 34 78  FIXING CLAMP
FOR TACHOMETER SHAFT AT PEDAL FLOOR, RIGHT
----- A 000 997 31 81  GROMMET
FOR TACHOMETER SHAFT AT PEDAL FLOOR, RIGHT
----- A 186 997 04 81  GROMMET
FOR TACHOMETER SHAFT AT PEDAL FLOOR, RIGHT
140 A 120 995 00 01  FIXING CLAMP
FOR FLEXIBLE DRIVE SHAFT AT BEARING, CONTROL SHAFT
----- LENS-HD.SCREW
AM 5X10 DIN 7985-4S FOR FLEXIBLE DRIVE SHAFT AT BEARING, CONTROL SHAFT
----- LOCK WASHER
B 5 DIN 127
143 A 000 154 55 06  3-ELEMENT VOLTAGE 001
145 A 000 154 02 50  RUBBER BUSHING 003
----- LOCK WASHER
B 6 DIN 127 FOR REGULATOR AT BRACKET, WHEEL ARCH PAN 		003
----- LENS-HD.SCREW
AM 6X20 DIN 7985-4S FOR REGULATOR AT BRACKET, WHEEL ARCH PAN 		003
148 A 000 997 07 81  GROMMET
FOR CABLE FROM VOLTAGE REGULATOR TO GENERATOR 		003
149 A 000 545 05 25  SOCKET
FOR HAND LAMP 		001
----- A 121 540 17 09  AUXILIARY CABLE HARNESS
SPECIAL REQUEST FOG LIGHT SWITCHING FOR CARS EXPORTED TO THE USA 		001
----- INSULATING HOSE
100-MM LONG B 20 X 22,4 SW DIN 40621 OVER MAIN CABLE HARNESS, LIGHT ROTARY SWITCH ORDER BY THE METER SPECIAL REQUEST FOG 		001
----- A 000 545 03 01  FUSE BOX, 2-POLE
AT FRONT WALL SPECIAL REQUEST FOG LIGHT SWITCHING FOR CARS EXPORTED TO THE USA 		001
----- CYLINDRICAL SCREW
AM 4X15 DIN 84-4 S FOR FUSE BOX AT FRESH AIR BOX, LEFT SPECIAL REQUEST FOG LIGHT SWITCHING FOR CARS EXPORTED TO THE USA 		001
150 A 000 542 33 20  HORN, BASS SOUND 001
151 A 000 542 34 20  HORN, HIGH SOUND 001
----- A 001 542 09 20  HORN, BASS SOUND
SIGNAL SYSTEM FOR CARS EXPORTED TO FRANCE 		001
----- A 001 542 10 20  HORN, MIDDLE SOUND
SIGNAL SYSTEM FOR CARS EXPORTED TO FRANCE 		001
----- HEX.-HD. SCREW
M 10X28 DIN 931-8 G FOR HORN AT BRACKET 		002
----- LOCK WASHER
B 10 DIN 127 FOR HORN AT BRACKET 		002
----- HEX. NUT
M 10 DIN 934-5 S FOR HORN AT BRACKET 		002
----- LOCK WASHER
B 4 DIN 127 FOR CABLE CONNECTION AT HORN 		004
----- CYLINDRICAL SCREW
AM 4X6 DIN 84-4 S FOR CABLE CONNECTION AT HORN 		004
157 A 000 988 33 78  FIXING CLAMP
FOR CABLE TO HORN 		001
160 A 000 158 07 03  IGNITION COIL 001
161 A 000 158 02 40  FIXING CLAMP
FOR IGNITION COIL 		001
----- CYLINDRICAL SCREW
BM 5X40 DIN 84-4 S 		001
----- SQUARE NUT
M 5 DIN 562 		001
----- HEX.-HD.SCREW
M 6X12 DIN 933-8 G FOR IGNITION COIL AT BRACKET 		002
----- LOCK WASHER
B 6 DIN 127 FOR IGNITION COIL AT BRACKET 		002
----- WASHER
A 6,4 DIN 9021 FOR IGNITION COIL AT BRACKET 		002
167 A 000 546 02 35  RUBBER PROTECTIVE CAP
FOR IGNITION COIL 		002
168 A 000 158 01 45  COMPENSATING RESISTANCE 001
169 A 180 158 00 40  BRACKET
FOR COMPENSATING RESISTANCE 		001
----- LENS-HD.SHEET METAL SCREW
B 3,5X6,5 DIN 7981 FOR COMPENSATING RESISTANCE AT SUPPORTING PLATE 		002
171 A 180 546 00 02  CABLE
FOR COMPENSATING RESISTANCE, IGNITION COIL 		001
----- INSULATING HOSE,
210-MM LONG B 4X5 DIN 40621 FOR CABLE FROM COMPENSATING RESISTANCE, IGNITION COIL ORDER BY THE METER 		001
----- A 000 542 15 19  CONTACTOR 12 V
FOR CARS WITH BLINKER SYSTEM EXPORTED TO AUSTRIA AND PORTUGAL

Replaced by: A 000 542 27 19 		001
----- A 000 542 27 19  CONTACTOR 12 V
FOR CARS WITH BLINKER SYSTEM EXPORTED TO AUSTRIA AND PORTUGAL 		001
----- ELECTRIC CABLE
BLACK 80-MM LONG B 1 DIN 72551 FROM RELAY, TERMINAL 30 TO RELAY, TERMINAL 86 ORDER BY THE METER FOR CARS WITH BLINKER SY 		001
----- TERMINAL
4X0,8 N 261 FOR CARS WITH BLINKER SYSTEM EXPORTED TO AUSTRIA AND PORTUGAL 		005
----- A 000 997 01 81  GROMMET
FOR CARS WITH BLINKER SYSTEM EXPORTED TO AUSTRIA AND PORTUGAL 		005
172 A 000 542 27 19  CONTACTOR 12 V
----- LENS-HD.SCREW
AM 4X18 DIN 7985-4S FOR CONTACTOR AT LEFT WHEEL ARCH PAN
----- LOCK WASHER
B 4 DIN 127 FOR CONTACTOR AT LEFT WHEEL ARCH PAN
----- HEX. NUT
M 4 DIN 934-5 S FOR CONTACTOR AT LEFT WHEEL ARCH PAN
----- A 000 545 82 24  REPLACED BY
001 545 12 24 TOGETHER WITH 1 TIGHTENING WASHER 128 350 00 67
175 A 001 545 12 24  CONTROLS SWITCH
AT REAR AXLE SUSPENSION SIMPLICITY OF SPARE PARTS
----- A 000 545 02 38  GUIDE CUP
176 A 000 545 00 78  OPERATION ROD
177 A 000 545 00 97  TENSION SPRING
178 A 000 545 02 38  GUIDE CUP
----- HEX.-HD.SCREW
M 6X10 DIN 933-8 G FOR CONTROL SWITCH AT HOUSING REAR AXLE SUSPENSION
----- WASHER
6,4 DIN 125 FOR CONTROL SWITCH AT HOUSING REAR AXLE SUSPENSION
----- LOCK WASHER
B 6 DIN 127 FOR CONTROL SWITCH AT HOUSING REAR AXLE SUSPENSION
----- A 180 540 19 09  ADDITIONAL CABLE HARNESS
FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE ALSO GROUP 25)
----- A 180 540 20 09  ADDITIONAL CABLE HARNESS
FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE ALSO GROUP 25)
----- A 000 545 68 15  TEMPERATURE SIGNAL LIGHT
AT JACKET TUBE FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE ALSO GROUP 25)
----- A 000 545 69 15  TEMPERATURE SIGNAL LIGHT
WITH ENGLISH READING AT JACKET TUBE FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE ALSO GROUP 25)
----- A 000 545 11 19  LAMP SOCKET
FOR TEMPERATURE SIGNAL LIGHT FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE ALSO GROUP 25)
----- BULB
H 12 V 2 W DIN 72601 FOR TEMPERATURE SIGNAL LIGHT FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE ALSO GROUP 25)
----- A 000 159 00 85  RUBBER PROTECTIVE CAP
FOR TEMPERATURE SIGNAL LIGHT FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE ALSO GROUP 25)
----- LENS-HD.SHEET METAL SCREW
B 2,2 X 9,5 DIN 7981 FOR TEMPERATURE SIGNAL LIGHT AT JACKET TUBE FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE AL